FREEME ✌ MATEMINCO MT70 MINI SFN55.2 6800lm 26500/21700 Flashlight Group Buy - Shipped

223 posts / 0 new
Last post
Tom E
Tom E's picture
Offline
Last seen: 34 min 52 sec ago
Joined: 08/19/2012 - 08:23
Posts: 15042
Location: LI NY

Stefan333 wrote:
After reading some threads, is it possible that the setting "2C to turbo from off" must be set before compiling the firmware?

Not sure where that comes from Anduril or Anduril 2? I don't see anything like "2C to turbo from off" in Anduril 2.

2C from OFF goes to the top of ramp. If you configure top of ramp to be turbo, then a 2C from OFF will go to turbo. That's the only way I know of to do that.

In my Anduril 2 builds, I'll set up the behavior to be like Anduril 1 - if the light is ON, a 2C goes to turbo, or from OFF, do a 1C then a 2C to get to turbo. This will work with the default top of ramp.

seal
Offline
Last seen: 1 week 3 days ago
Joined: 09/09/2021 - 18:47
Posts: 3
Location: Sweden
freeme wrote:

How many need MATEMINCO 26800 tube?

MATEMINCO MT70 MINI + 26800 tube + 26800 battery bundle and available for us in northern Europe with a fair shipping fee? Smile

Tangra
Offline
Last seen: 1 week 4 days ago
Joined: 08/01/2016 - 05:33
Posts: 606
Location: Europe

Any news about this light with 26800 tube and battery for Europe?

Tom E
Tom E's picture
Offline
Last seen: 34 min 52 sec ago
Joined: 08/19/2012 - 08:23
Posts: 15042
Location: LI NY

I ordered and received the 26800 tube from BG - no light to go with it though from Neal. Dunno why BG's shipping has been so good lately.

texas shooter
Offline
Last seen: 4 hours 26 min ago
Joined: 08/26/2012 - 02:14
Posts: 1863
Location: Texas
Tom E wrote:

I ordered and received the 26800 tube from BG – no light to go with it though from Neal. Dunno why BG’s shipping has been so good lately.

Banggood has been using airmail lately then straight to USPS instead of a slower intermediate. I’ve gotten quick mail lately too, a few dollars more than the free shipping of old.

Tom E
Tom E's picture
Offline
Last seen: 34 min 52 sec ago
Joined: 08/19/2012 - 08:23
Posts: 15042
Location: LI NY

I got in the FT03 MT70 Mini! surprised Nice! On a Lishen LR2170LA @4.20V, 19.9 amps at the tail, 6200 lumens at start, 211 kcd. I can't get it to run 30 secs without tripping temp reg.

I'm gonna add spring bypasses and check the LED wiring and try a T42 cell.

So I got another FT03 w/XHP50.2 3V and just added spring bypasses. Measured 19.7 amps, 5560 lumens at start, 189 kcd.

So for about the same amps, the SFN55.2 is about 10% brighter, throws better and has a much better tint in the beam. The XHP50.2 is supposedly 6000K with a blue flood, yellow corona where the SFN55.2 is white through-out. No contest here.

 

fogofwar
fogofwar's picture
Offline
Last seen: 20 hours 49 min ago
Joined: 08/19/2021 - 05:38
Posts: 186
Location: Shenzhen, China

Wow putting 20A into a XHP 50.2…

Tom E
Tom E's picture
Offline
Last seen: 34 min 52 sec ago
Joined: 08/19/2012 - 08:23
Posts: 15042
Location: LI NY

Before/After spring bypasses, and removing the 2nd inside spring (amps measured with tailcap off):

MT70 Mini w/SFN55.2 stock on a 26800 at 4.20V: 19 amps, 5390 at start

MT70 Mini w/SFN55.2 w/22 AWG bypasses on a 26800 at 4.20V: 20.7 amps, 6300 at start, 217 kcd (2 sec pause)

 

MT70 Mini w/SFN55.2 w/22 AWG bypasses on a T42 at 4.20V: 22.5 amps, 6670 lumens at start, 220 kcd (2 sec pause)

 

fogofwar
fogofwar's picture
Offline
Last seen: 20 hours 49 min ago
Joined: 08/19/2021 - 05:38
Posts: 186
Location: Shenzhen, China

On Taobao, Mateminco now sells a new SFH55.2 version of the MT35 Mini as well. I’m going to pick that up on Double 12.

Does your light have Anduril 1 or 2 Tom?

Tom E
Tom E's picture
Offline
Last seen: 34 min 52 sec ago
Joined: 08/19/2012 - 08:23
Posts: 15042
Location: LI NY

It's Anduril 1 - no version on 15 clicks, exiting lockout via 4 clicks, the main LED is OFF.

Just upgraded the LED wires to 18 AWG, from 20 AWG, swapped the OP reflector with an SMO, and had to add a copper shim (1" 18 AWG) under the MCPCB to keep the SMO from rattling (very slightly shorter). The beam looks great w/SMO and got a bump in throw.

On a 26800 at 4.20V, now I'm measuring 21.7 amps, 6210 lumens at start, and 254 kcd throw (2 sec pause).

So lumens went down a little (6300 -> 6210) but throw went up (217 -> 254 kcd).

 

texas shooter
Offline
Last seen: 4 hours 26 min ago
Joined: 08/26/2012 - 02:14
Posts: 1863
Location: Texas

fogofwar wrote:
On Taobao, Mateminco now sells a new SFH55.2 version of the MT35 Mini as well. I’m going to pick that up on Double 12.

Does your light have Anduril 1 or 2 Tom?

This one might need a group buy with 26800. It’s a significant increase in output. Would also like to see a group buy with the Mateminco MT01, 26800 battery, with the SFN55.2 or SFH55 LED.

Freeme can you pull this off?

freeme
freeme's picture
Offline
Last seen: 3 hours 41 min ago
Joined: 11/14/2013 - 22:00
Posts: 10785

I did request but Neal seems "uninterested". I feel that i shouldn't him involve since only 2-3 persons are interested with the tube. 

texas shooter wrote:
fogofwar wrote:
On Taobao, Mateminco now sells a new SFH55.2 version of the MT35 Mini as well. I'm going to pick that up on Double 12. Does your light have Anduril 1 or 2 Tom?
This one might need a group buy with 26800. It's a significant increase in output. Would also like to see a group buy with the Mateminco MT01, 26800 battery, with the SFN55.2 or SFH55 LED. Freeme can you pull this off?

1thedeals.comyoutubeAstroluxNealsgadgetsolight

Pages