[Design with Terry]Wurkkos TS32 15000+ Lumens Flashlight Concept

120 posts / 0 new
Last post
kokosnh
Offline
Last seen: 5 hours 19 min ago
Joined: 07/02/2021 - 06:27
Posts: 86
Location: Polska

Sold separately handle mount to the tail, I didn't think of that, I like it. 
So now My wild Idea base on that and current design, to allow for it. 
Make that grooves on the battery tube at angle, and make a big thread out of it. The handle would just screw in it, and have a holes (3 or 4) for couples screws or something, to threads through it, and go in that 7 or 8 (from render i count 7) larger oblong groves in battery tube.  So you can lock it into place, that holes in base of the handle would have to be long vertically, so you can lock the handle directly over the switches. That design could allow that. That Nitecore have just 2 part base handle, but i think it's weak, you just need a long vertical hole of size of length between the large oblong groves )
Of course, the portion before the start of the grooves on the battery tube, would have to be shallower, than threads.
That design would allow for the handle to be moved closer, and further, from the switches, as well, to move right and left from them. So we can have one handle for large and small hands, and you can move the center of gravity to your preferable spot, for handle. 
And the locking screws  would not be load bearing, it could be screws with rubber tip, to not scratch surface. Or some other type of rotation locking mechanism.

There Is also one handle design that would work with the current design, just have a hinge, and a screw, to lock the base of it to the tube.

Ps.  saw this now, a TIR optic, and single battery (which is probably bad idea, but then again, he probably used his NOCTIGON K9.3 base) 

https://www.reddit.com/r/flashlight/comments/ptksww/how_about_a_noctigon_k141/

Pps. and we are getting close cheaper and better version of fenix LR40r

 https://www.fenixlighting.com/product/fenix-lr40r-flashlight-12000-lumens/

Mblackes
Offline
Last seen: 15 hours 8 min ago
Joined: 11/06/2020 - 16:39
Posts: 26
Location: Germany

Any updates?

nbjly
Online
Last seen: 5 min 10 sec ago
Joined: 09/08/2011 - 18:31
Posts: 90

How about an LEP in the center? I haven’t seen that yet -

stephenk
stephenk's picture
Offline
Last seen: 8 hours 41 min ago
Joined: 01/30/2016 - 05:09
Posts: 1856
Location: Australia

A tripod mount would be a good addition. Sustained brightness >2000lm should be aimed for.

Wurkkos Terry
Wurkkos Terry's picture
Offline
Last seen: 22 hours 12 min ago
Joined: 04/08/2021 - 04:25
Posts: 118
Mblackes wrote:
Any updates?

Yes, now we are making prototype, please stay tuned

Wurkkos for all workers

www.wurkkos.com(link is external)

 

Facebook: Wurkkos Terry

Email: wurkkos_marketing@163.com

Contact me if you want to review, buy with coupon, design with us.

Miguel_79
Offline
Last seen: 44 min 29 sec ago
Joined: 04/21/2011 - 06:22
Posts: 337
Location: Spain
Wurkkos Terry wrote:
Mblackes wrote:
Any updates?

Yes, now we are making prototype, please stay tuned

It’s great to know that, this flashlight looks spectacular.

Sirstinky
Offline
Last seen: 8 hours 38 min ago
Joined: 11/02/2018 - 17:07
Posts: 1413
Location: Vancouver, WA
Wurkkos Terry wrote:
Mblackes wrote:
Any updates?

Yes, now we are making prototype, please stay tuned

Awesome!

Wurkkos
Wurkkos's picture
Offline
Last seen: 22 hours 28 min ago
Joined: 05/28/2019 - 05:14
Posts: 477

XHP50.3 Flat LED use in center emitter, seems a good choice Smile

AssortedEnthusiast
Offline
Last seen: 2 weeks 4 days ago
Joined: 07/23/2021 - 11:53
Posts: 7
Location: United States

I heard rumors about the XHP50.3 but I didn’t know there would be a flat version. What can expect from this emitter and how would it compare to something like the SFT40?

So far I am loving everything about this prototype and I look forward to it’s release. If I could suggest one thing, it would be to offer SST-20 2700k for the flood emitters. Keep up the awesome work!

rost333
rost333's picture
Offline
Last seen: 1 month 1 week ago
Joined: 08/08/2018 - 10:01
Posts: 435
AssortedEnthusiast wrote:
If I could suggest one thing, it would be to offer SST-20 2700k for the flood emitters.

+1

dthrckt
dthrckt's picture
Offline
Last seen: 1 week 3 days ago
Joined: 11/08/2011 - 10:11
Posts: 4634
Location: Upstate NY
Wurkkos wrote:
XHP50.3 Flat LED use in center emitter, seems a good choice Smile

Yes!

Twin8
Twin8's picture
Offline
Last seen: 3 weeks 6 days ago
Joined: 12/07/2020 - 22:45
Posts: 51
Location: California, USA

I think its important to at least offer high cri sst20’s in the outer ring. High cri / nicer tint is important in a flood beam, less so in a thrower.

icpart
Offline
Last seen: 7 hours 41 min ago
Joined: 04/15/2019 - 01:13
Posts: 369
Location: Bulgaria

Twin8 wrote:
I think its important to at least offer high cri sst20’s in the outer ring. High cri / nicer tint is important in a flood beam, less so in a thrower.

Better will be LH351D 90CRI. It is more floody compared to SST20 and have great choise of colors compared to only 4000K for SST. Also LH351D has better efficiency compared to SST20.
Wurkkos
Wurkkos's picture
Offline
Last seen: 22 hours 28 min ago
Joined: 05/28/2019 - 05:14
Posts: 477

AssortedEnthusiast wrote:
I heard rumors about the XHP50.3 but I didn’t know there would be a flat version. What can expect from this emitter and how would it compare to something like the SFT40?

So far I am loving everything about this prototype and I look forward to it’s release. If I could suggest one thing, it would be to offer SST-20 2700k for the flood emitters. Keep up the awesome work!


we decided use LH351D for flood finally
AssortedEnthusiast
Offline
Last seen: 2 weeks 4 days ago
Joined: 07/23/2021 - 11:53
Posts: 7
Location: United States

That sounds great!

Miguel_79
Offline
Last seen: 44 min 29 sec ago
Joined: 04/21/2011 - 06:22
Posts: 337
Location: Spain

Any news about this model?

ArtieT59
ArtieT59's picture
Offline
Last seen: 1 hour 14 min ago
Joined: 02/25/2020 - 17:55
Posts: 3163
Location: CT, USA

Xhp50.3 HI in the center does sound like a great idea! 

[FLF] Five Light Friday https://budgetlightforum.com/node/78749

Check out some of my new lights (picture heavy) and quick first impressions of them here: https://budgetlightforum.com/node/77180

My Sft40 beamshots / comparison thread: https://budgetlightforum.com/node/78100

Tatteredmidnight
Offline
Last seen: 3 hours 30 min ago
Joined: 09/11/2021 - 19:32
Posts: 19
Location: United States

Proper regulation would be a great addition, no more FET direct drive.

Haukkeli
Offline
Last seen: 1 hour 16 min ago
Joined: 06/24/2021 - 05:27
Posts: 162
Location: Suomi

So it would be 2S2P battery arrangement if it uses XHP50.3 hi?

kokosnh
Offline
Last seen: 5 hours 19 min ago
Joined: 07/02/2021 - 06:27
Posts: 86
Location: Polska

any changes of plan, for the dual switch, now that the Anduril tint ramping and instant channel switching firmware is out there (looking at the hank KR4).

tactical_grizzly
tactical_grizzly's picture
Online
Last seen: 6 min 53 sec ago
Joined: 11/08/2020 - 14:54
Posts: 148
Location: North Texas
kokosnh wrote:

any changes of plan, for the dual switch, now that the Anduril tint ramping and instant channel switching firmware is out there (looking at the hank KR4).

Those features aren’t new in Anduril. LT1 & K9.3 have had those for quite awhile. Wurkkos knew that, and still decided to forego Anduril and use this dual switch design instrad, unfortunately.

Flashlight enth...
Offline
Last seen: 3 weeks 4 hours ago
Joined: 01/04/2019 - 21:09
Posts: 52

What is the current status of this? Also does anyone have a ballpark guess where the price would be?

JaronRH
Offline
Last seen: 9 hours 16 min ago
Joined: 04/06/2020 - 14:29
Posts: 44
Location: PA, USA

This is sounding like a great light!

LumenMax
LumenMax's picture
Offline
Last seen: 2 hours 38 min ago
Joined: 08/21/2018 - 10:50
Posts: 390
Location: NY

Flashlight enthusiast wrote:
What is the current status of this? Also does anyone have a ballpark guess where the price would be?

 

Wurkkos is still working on the circuit/driver design. No estimated date of completion for this yet. 

st0ckmod
Offline
Last seen: 35 min 24 sec ago
Joined: 11/15/2021 - 01:26
Posts: 20

I was just thinking about a light like this. Definitely interested!

Wurkkos Terry
Wurkkos Terry's picture
Offline
Last seen: 22 hours 12 min ago
Joined: 04/08/2021 - 04:25
Posts: 118

Updated

Wurkkos for all workers

www.wurkkos.com(link is external)

 

Facebook: Wurkkos Terry

Email: wurkkos_marketing@163.com

Contact me if you want to review, buy with coupon, design with us.

funwok
Offline
Last seen: 5 hours 15 min ago
Joined: 11/26/2020 - 10:26
Posts: 75
Location: Blopp

Do you already know which LED to use in the final product?

Wurkkos Terry
Wurkkos Terry's picture
Offline
Last seen: 22 hours 12 min ago
Joined: 04/08/2021 - 04:25
Posts: 118

12*LH351D +1*SFT40

Wurkkos for all workers

www.wurkkos.com(link is external)

 

Facebook: Wurkkos Terry

Email: wurkkos_marketing@163.com

Contact me if you want to review, buy with coupon, design with us.

Miguel_79
Offline
Last seen: 44 min 29 sec ago
Joined: 04/21/2011 - 06:22
Posts: 337
Location: Spain

We need more pics of the prototype please.

Pages