6v XHP50.2 & H1-A Driver Combo Okay??

3 posts / 0 new
Last post
Hank33
Hank33's picture
Offline
Last seen: 10 hours 41 min ago
Joined: 11/22/2019 - 16:00
Posts: 1258
Location: Vancouver, B.C.
6v XHP50.2 & H1-A Driver Combo Okay??

Okay, so I finally decided to change the original XHP50.2 6000K 3v in my Astrolux EC01. I will be using the XHP50.2 3000K 6v with an H1-A driver. Does my combo sound okay?

dick33
Offline
Last seen: 9 hours 59 min ago
Joined: 02/01/2020 - 00:13
Posts: 12

Astrolux EC01 has e-switch. This boost driver is designed for power button switch.
You can’t use it with e-switch light.

Hank33
Hank33's picture
Offline
Last seen: 10 hours 41 min ago
Joined: 11/22/2019 - 16:00
Posts: 1258
Location: Vancouver, B.C.
dick33 wrote:
Astrolux EC01 has e-switch. This boost driver is designed for power button switch. You can’t use it with e-switch light.

Hey, thanks for the info, and yeah I just realized later after I posted that it’s an E-switch. It must have been the initial excitement causing the fog to roll in. Big Smile But on a side note, I have the parts now to do a mod with the 6v XHP50.2 nexttime. Thumbs Up