Very good condition. Cleaned and fresh grease applied. At the back, I replaced the spring with a thicker, high-current one. I put a new o-ring on the rear thread, because the original one was too thick and the tailcap was pushing it out when turning. I am adding a second spare. I also made a new insulator on the plus side of the battery, which does not fall out. I drilled and tapped holes for the screws in the pill. I tried to measure them so that the standard mcpcb and the black kai leave room for the wires. Lens without flaws. $ 35 shipped.
Gallery
cancel,
Available or not? Anyway, interested.
Yes, available. PM sent.
Thanks, replied.