[WTS] Mechtorch, D4V2, Fenix, TnC, Niteye, Jetbeam

21 posts / 0 new
Last post
scalpel_ninja
Offline
Last seen: 3 hours 42 min ago
Joined: 07/07/2020 - 18:13
Posts: 296
[WTS] Mechtorch, D4V2, Fenix, TnC, Niteye, Jetbeam

All prices are PayPal Friends & Family (otherwise add 4% for Good & Services with no notes please), including insured shipping to the US only (I have over 50 swaps on Knife_Swap). All lights do not have batteries included (unless otherwise stated), however I might have a few spares if can throw in if requested and available. No trades at this time. Thanks for looking!

This has also been cross-posted to Reddit. I will honor the earliest request made on each light.

Fenix PD40R
$95 $80 $75
Good condition with a few scuffs here and there. Previous owner modded it to take unprotected cells by soldering a post on the positive end. Super bright and solid.

D4V2 Dual Channel $85 $80
W1 and LH351D 5000K. Some scratches on the body due to the clip. Comes with original box and extra O-rings. No magnet in the tail.

Niteye MSC20 $60
Good condition, might have a few scratches here and there. Carried only for a few weeks then put back in the box. Comes with original documents and O-rings. No cell.

Jetbeam TCR20 $180
I reflowed a Nichia 219b sw45k (purchased from Andy Zhu). Otherwise in good condition with light scratches. Comes with one 16340 Efest cell and box with documents.

TnC 18650 Custom $150
Previously owned by Mr. Mcbrat. Tapped by him and has a McBrat clip installed. Comes with deep red emitter and spare pill with neutral white emitter. White pill will need insulation around the emitter or else the reflector will short the cell. I replaced the switch with a fresh McClicky after the spring welded itself. Both pills and emitters work as designed. I might have a spare insulation disc I can include. No cell.

Mechforce Mechtorch $175
Stock and in mint condition. Comes with original box. Has the H17fx programmable driver. No cell.

Vital Gear E2C adapters: $10 each (one remaining)

Sold items below:

Sunwayman V11R
$130 $120 $110 $100 $90 Sold
Light wear, comes with the AA extension and sheath

Olight Warrior X Pro
$70 $65 Light wear, also acquired as part of a package; battery included Sold

-Lumintop Antman LEP
$110 $100 $95 Sold
Mint, very little use, mostly used to compare with other LEPs; great pocket laser

-Lumintop X9L
$100 $90 $85 Sold
Awesome thrower with the SBT 90 emitter; light wear

Copper $60 $55 $50 Sold
Some wear on the clear coat, yellow button and aux lights. SST20 4000k. Appears one of the lights in the button does not light. Otherwise works fine on Anduril 1

-Olight M2R Pro
$70 $65 $60 Withdrawn
Like new condition, got it as part of a package deal; battery included

-Fireflies E07
Ti/Cu $70 $65 $60
Also light clear coat wear, red button and aux lights; all lights appear to function, Anduril 1, SST20 4000k Sold

-Convoy 4×18Avn
$100 $90 $85 Sold
Light wear, SBT90 emitter, hot rod thrower modified by Vinh, VN2 driver with 5000+ lumens and 340Klux

Malkoff Bodyguard V2
$160 $150 $140 $120 Sold
Mint with 16340 body

Malkoff MDC SHO
$100 $90 $85 Sold
Some dings on the head and tail, also 16340 body

Lumintop LM10
$105 $95 $90 Sold
Mint condition with the upgraded milled clip

Manker MK34vn
$150 $130 $100 Sold
Modified with 219c emitters. Switch is a bit hard to press, but works nonetheless

Surefire E2e -$250 $240 Traded
I bought this from the CPF moderator scout24 via FB. This is a Tana TripLED custom piece. It’s fully loaded with most (if not all) options checked. XPL-HI 4000K with glow insert. Has the fully programmable H17fx driver. I’m selling it at the price I got it. It would likely cost this alone for the custom work, and no need to wait for Tana to complete the work or shipping to/from the EU.

Oveready E35 adapter: $30 Sold

-Surefire Stiletto
$100 $95 $90 $80 $75 Traded
Mint condition, lightly carried and ran for less than 30 minutes

Surefire G2Z Host -$50 $45-
Host only, mint condition and button has been changed to clicky.

Hi/Lo ring: $25

Dummy CR123 cells: direct from Malkoff, $5 add on with any purchase.

Malkoff Bodyguard stainless bezel and tool: unused, $20

Add-ons for $5; one per user/transaction
Zanflare lights

Current Collection:

Inova X5 | Maratac Titanium Inspection AAAx2 XPL-G2 swapped to Nichia 219B sw45K | Wowtac A2S NW | Thrunite Ti3 NW | FW3 CuTi XPL-HI 5000K + 18350 tube | Olight I1R EOS (de-anodized) | Convoy S2+ 7135x8 T6-3B | HDS Rotary Nichia 219B 4000K | Nitecore Cu TINI | Fraz Labs Tiny Tank 18350 | TnC Aluminum Deep Red

Edited by: scalpel_ninja on 05/20/2022 - 17:00
scalpel_ninja
Offline
Last seen: 3 hours 42 min ago
Joined: 07/07/2020 - 18:13
Posts: 296

Bump and price drop.

Current Collection:

Inova X5 | Maratac Titanium Inspection AAAx2 XPL-G2 swapped to Nichia 219B sw45K | Wowtac A2S NW | Thrunite Ti3 NW | FW3 CuTi XPL-HI 5000K + 18350 tube | Olight I1R EOS (de-anodized) | Convoy S2+ 7135x8 T6-3B | HDS Rotary Nichia 219B 4000K | Nitecore Cu TINI | Fraz Labs Tiny Tank 18350 | TnC Aluminum Deep Red

BlueSwordM
BlueSwordM's picture
Offline
Last seen: 2 hours 34 min ago
Joined: 11/29/2017 - 12:34
Posts: 6266
Location: Canada

You should probably make the previews smaller Silly

My very own high current Beryllium Copper springs Gen 3:
http://budgetlightforum.com/node/67401
Liitokala Aliexpress Stores Battery Fraud: http://budgetlightforum.com/node/60547

scalpel_ninja
Offline
Last seen: 3 hours 42 min ago
Joined: 07/07/2020 - 18:13
Posts: 296
BlueSwordM wrote:
You should probably make the previews smaller Silly

Done. Thanks for the feedback! Big Smile

Current Collection:

Inova X5 | Maratac Titanium Inspection AAAx2 XPL-G2 swapped to Nichia 219B sw45K | Wowtac A2S NW | Thrunite Ti3 NW | FW3 CuTi XPL-HI 5000K + 18350 tube | Olight I1R EOS (de-anodized) | Convoy S2+ 7135x8 T6-3B | HDS Rotary Nichia 219B 4000K | Nitecore Cu TINI | Fraz Labs Tiny Tank 18350 | TnC Aluminum Deep Red

mattlward
mattlward's picture
Offline
Last seen: 7 hours 35 min ago
Joined: 06/19/2015 - 09:20
Posts: 3385
Location: Illinois, USA

Can you tell me what the CCT is on the LM10? Assume it is still XP-L Hi?

EDC rotation:
KR4, SST-20 FA3 4000k (favorite!)
FW3A, Nichia 4000k sw40 r9080 (second favorite)
FW1A, LH351D 3500k (third favorite)
FW1A, XP-L Hi 3A
FW3A, LH351D 3500k
FW3A, SST20 FD2 4000k
FW3A, Cree XP-L Hi 5A3
Emisar D4V2, SST20 4000k
Emisar D4V2, brass E21A 3500k (night light of choice)

scalpel_ninja
Offline
Last seen: 3 hours 42 min ago
Joined: 07/07/2020 - 18:13
Posts: 296

It’s an SST20 4000K. Nice bin, very neutral with a hint of rosiness.

Current Collection:

Inova X5 | Maratac Titanium Inspection AAAx2 XPL-G2 swapped to Nichia 219B sw45K | Wowtac A2S NW | Thrunite Ti3 NW | FW3 CuTi XPL-HI 5000K + 18350 tube | Olight I1R EOS (de-anodized) | Convoy S2+ 7135x8 T6-3B | HDS Rotary Nichia 219B 4000K | Nitecore Cu TINI | Fraz Labs Tiny Tank 18350 | TnC Aluminum Deep Red

scalpel_ninja
Offline
Last seen: 3 hours 42 min ago
Joined: 07/07/2020 - 18:13
Posts: 296

Another round of price drops. Shoot me an offer! Big Smile

Current Collection:

Inova X5 | Maratac Titanium Inspection AAAx2 XPL-G2 swapped to Nichia 219B sw45K | Wowtac A2S NW | Thrunite Ti3 NW | FW3 CuTi XPL-HI 5000K + 18350 tube | Olight I1R EOS (de-anodized) | Convoy S2+ 7135x8 T6-3B | HDS Rotary Nichia 219B 4000K | Nitecore Cu TINI | Fraz Labs Tiny Tank 18350 | TnC Aluminum Deep Red

scalpel_ninja
Offline
Last seen: 3 hours 42 min ago
Joined: 07/07/2020 - 18:13
Posts: 296

Bump, listing updated with items sold.

Current Collection:

Inova X5 | Maratac Titanium Inspection AAAx2 XPL-G2 swapped to Nichia 219B sw45K | Wowtac A2S NW | Thrunite Ti3 NW | FW3 CuTi XPL-HI 5000K + 18350 tube | Olight I1R EOS (de-anodized) | Convoy S2+ 7135x8 T6-3B | HDS Rotary Nichia 219B 4000K | Nitecore Cu TINI | Fraz Labs Tiny Tank 18350 | TnC Aluminum Deep Red

HONDARIDER
HONDARIDER's picture
Offline
Last seen: 1 month 6 days ago
Joined: 04/22/2018 - 11:45
Posts: 947
Location: Hot Springs, Arkansas

Nice high end lights. I have a few like this but they are stored away. Too rough with them I guess. Great little collection. Good luck selling.

scalpel_ninja
Offline
Last seen: 3 hours 42 min ago
Joined: 07/07/2020 - 18:13
Posts: 296

Thanks!

Current Collection:

Inova X5 | Maratac Titanium Inspection AAAx2 XPL-G2 swapped to Nichia 219B sw45K | Wowtac A2S NW | Thrunite Ti3 NW | FW3 CuTi XPL-HI 5000K + 18350 tube | Olight I1R EOS (de-anodized) | Convoy S2+ 7135x8 T6-3B | HDS Rotary Nichia 219B 4000K | Nitecore Cu TINI | Fraz Labs Tiny Tank 18350 | TnC Aluminum Deep Red

Auxilshunter
Offline
Last seen: 2 days 12 hours ago
Joined: 09/01/2020 - 11:37
Posts: 121
Location: NC-USA

Thanks Scalpel Ninja. I’m looking forward to the TI/CU E07!

scalpel_ninja
Offline
Last seen: 3 hours 42 min ago
Joined: 07/07/2020 - 18:13
Posts: 296

Price drops again!

Current Collection:

Inova X5 | Maratac Titanium Inspection AAAx2 XPL-G2 swapped to Nichia 219B sw45K | Wowtac A2S NW | Thrunite Ti3 NW | FW3 CuTi XPL-HI 5000K + 18350 tube | Olight I1R EOS (de-anodized) | Convoy S2+ 7135x8 T6-3B | HDS Rotary Nichia 219B 4000K | Nitecore Cu TINI | Fraz Labs Tiny Tank 18350 | TnC Aluminum Deep Red

scalpel_ninja
Offline
Last seen: 3 hours 42 min ago
Joined: 07/07/2020 - 18:13
Posts: 296

Price drops.

Current Collection:

Inova X5 | Maratac Titanium Inspection AAAx2 XPL-G2 swapped to Nichia 219B sw45K | Wowtac A2S NW | Thrunite Ti3 NW | FW3 CuTi XPL-HI 5000K + 18350 tube | Olight I1R EOS (de-anodized) | Convoy S2+ 7135x8 T6-3B | HDS Rotary Nichia 219B 4000K | Nitecore Cu TINI | Fraz Labs Tiny Tank 18350 | TnC Aluminum Deep Red

aginthelaw
aginthelaw's picture
Offline
Last seen: 5 hours 1 min ago
Joined: 09/30/2014 - 21:31
Posts: 1177
Location: noo joisey

Did I ever mention I got the light. Just in time to find out they make a mark 2 that’s twice the lumens. I’ll probably get that one too. Unless you’re selling yours when you get bored of it (1st you buy it, use it for a few days, sell it to me for a deep discount). If I feel adventurous I’ll take the switch apart and see if I can straighten it out. Thanks as always…

never fear shadows…it means a light shines nearby

scalpel_ninja
Offline
Last seen: 3 hours 42 min ago
Joined: 07/07/2020 - 18:13
Posts: 296
aginthelaw wrote:
Did I ever mention I got the light. Just in time to find out they make a mark 2 that’s twice the lumens. I’ll probably get that one too. Unless you’re selling yours when you get bored of it (1st you buy it, use it for a few days, sell it to me for a deep discount). If I feel adventurous I’ll take the switch apart and see if I can straighten it out. Thanks as always…

Glad you got them and enjoy the lights! Which light are you referring to that’s twice as bright?

Current Collection:

Inova X5 | Maratac Titanium Inspection AAAx2 XPL-G2 swapped to Nichia 219B sw45K | Wowtac A2S NW | Thrunite Ti3 NW | FW3 CuTi XPL-HI 5000K + 18350 tube | Olight I1R EOS (de-anodized) | Convoy S2+ 7135x8 T6-3B | HDS Rotary Nichia 219B 4000K | Nitecore Cu TINI | Fraz Labs Tiny Tank 18350 | TnC Aluminum Deep Red

scalpel_ninja
Offline
Last seen: 3 hours 42 min ago
Joined: 07/07/2020 - 18:13
Posts: 296

Price drops

Current Collection:

Inova X5 | Maratac Titanium Inspection AAAx2 XPL-G2 swapped to Nichia 219B sw45K | Wowtac A2S NW | Thrunite Ti3 NW | FW3 CuTi XPL-HI 5000K + 18350 tube | Olight I1R EOS (de-anodized) | Convoy S2+ 7135x8 T6-3B | HDS Rotary Nichia 219B 4000K | Nitecore Cu TINI | Fraz Labs Tiny Tank 18350 | TnC Aluminum Deep Red

aginthelaw
aginthelaw's picture
Offline
Last seen: 5 hours 1 min ago
Joined: 09/30/2014 - 21:31
Posts: 1177
Location: noo joisey

i’ll take:

Hi/Lo ring: $25

Dummy CR123 cells: direct from Malkoff, $5 add on with any purchase. (One remaining)

Malkoff Bodyguard stainless bezel and tool: unused, $20

Zanflare for $5.00

send me the paypal info agin

The mk34 is out now with about 26,000 lumens

never fear shadows…it means a light shines nearby

scalpel_ninja
Offline
Last seen: 3 hours 42 min ago
Joined: 07/07/2020 - 18:13
Posts: 296

aginthelaw wrote:
i’ll take:

Hi/Lo ring: $25

Dummy CR123 cells: direct from Malkoff, $5 add on with any purchase. (One remaining)

Malkoff Bodyguard stainless bezel and tool: unused, $20

Zanflare for $5.00

send me the paypal info agin

The mk34 is out now with about 26,000 lumens

PM sent Smile

Current Collection:

Inova X5 | Maratac Titanium Inspection AAAx2 XPL-G2 swapped to Nichia 219B sw45K | Wowtac A2S NW | Thrunite Ti3 NW | FW3 CuTi XPL-HI 5000K + 18350 tube | Olight I1R EOS (de-anodized) | Convoy S2+ 7135x8 T6-3B | HDS Rotary Nichia 219B 4000K | Nitecore Cu TINI | Fraz Labs Tiny Tank 18350 | TnC Aluminum Deep Red

aginthelaw
aginthelaw's picture
Offline
Last seen: 5 hours 1 min ago
Joined: 09/30/2014 - 21:31
Posts: 1177
Location: noo joisey

Got the goodies and the gift. Thanks. Now to get the time to play with them

never fear shadows…it means a light shines nearby

Auxilshunter
Offline
Last seen: 2 days 12 hours ago
Joined: 09/01/2020 - 11:37
Posts: 121
Location: NC-USA

I got the SF G2Z last week. Thanks!

Seth

scalpel_ninja
Offline
Last seen: 3 hours 42 min ago
Joined: 07/07/2020 - 18:13
Posts: 296

Added a few lights.

Current Collection:

Inova X5 | Maratac Titanium Inspection AAAx2 XPL-G2 swapped to Nichia 219B sw45K | Wowtac A2S NW | Thrunite Ti3 NW | FW3 CuTi XPL-HI 5000K + 18350 tube | Olight I1R EOS (de-anodized) | Convoy S2+ 7135x8 T6-3B | HDS Rotary Nichia 219B 4000K | Nitecore Cu TINI | Fraz Labs Tiny Tank 18350 | TnC Aluminum Deep Red