Oh no… here we go again. Of all the capable budget manufacturers, why hasn’t Lumintop added an +80mm high-flow fan blowing through a CPU type heat sink to cool the floor plate? I still haven’t seen a proper or effective active cooling solution outside of DIY examples. What does exists are next to worthless and concentrate their designs on esthetics rather than functionality. Perhaps Lumintop could address this ongoing problem and produce an affordable industry first. This has been mentioned dozens of times throughout the years and gone largely ignored. Please, no more silly micro fans around the bezel or handle mounted fans blowing across the bezel!
Freeme, can you please yell at them for us and talk some sense into them?
this looks so heavy, and not very heat dissipating for it's mass. The Wurkoss TS32 looks batter for the prototype. But I got to say, the handle looks really nice, heavy but nice.
Oh no… here we go again. Of all the capable budget manufacturers, why hasn’t Lumintop added an +80mm high-flow fan blowing through a CPU type heat sink to cool the floor plate? I still haven’t seen a proper or effective active cooling solution outside of DIY examples. What does exists are next to worthless and concentrate their designs on esthetics rather than functionality. Perhaps Lumintop could address this ongoing problem and produce an affordable industry first. This has been mentioned dozens of times throughout the years and gone largely ignored. Please, no more silly micro fans around the bezel or handle mounted fans blowing across the bezel!
Freeme, can you please yell at them for us and talk some sense into them?
Completely agree. It seems that flashlight manufacturers have not properly considered computer CPU style cooling methods.
@FlashPilot, there’s quite the reason for it: R&D expenditure and ROI time.
If a flashlight design is cheap, then ROI time is low and you still get to get your 300000000 lumens for 0.001 seconds, getting your light to sell a lot and make a decent profit.
If a flashlight design is more expensive and requires some expensive R&D, it’s not really going to make a big difference to the big numbers on the spreadsheet and have much higher ROI time.
Please, I ask manufacturers: please use differently colored USB ports
It’d be very nice to have orange/yellow USB-A ports
My very own high current Beryllium Copper springs Gen 3:
http://budgetlightforum.com/node/67401
Liitokala Aliexpress Stores Battery Fraud: http://budgetlightforum.com/node/60547
I sense 6s on turbo, than drop to 20%
Think of how stupid the average person is, and realize half of them are stupider than that. George Carlin
Anyone offended by my signature please fill Complaint Form. Thank you.
If a lot of people listen to Slayer, the world would be a better place to live" - Tommy Wiseau
Oh no… here we go again.
Of all the capable budget manufacturers, why hasn’t Lumintop added an +80mm high-flow fan blowing through a CPU type heat sink to cool the floor plate? I still haven’t seen a proper or effective active cooling solution outside of DIY examples. What does exists are next to worthless and concentrate their designs on esthetics rather than functionality. Perhaps Lumintop could address this ongoing problem and produce an affordable industry first. This has been mentioned dozens of times throughout the years and gone largely ignored. Please, no more silly micro fans around the bezel or handle mounted fans blowing across the bezel!
Freeme, can you please yell at them for us and talk some sense into them?
Review: 150 Million Candlepower Military Xenon Arc Battlefield Illuminator (AN/VSS-3A)
My new collection of 50+ Chinese knives
Interested in neutral/ warmwhite !
Friend of Flashlights ;-)
this looks so heavy, and not very heat dissipating for it's mass.
The Wurkoss TS32 looks batter for the prototype.
But I got to say, the handle looks really nice, heavy but nice.
I fully agree with you Flash Pilot.
Completely agree. It seems that flashlight manufacturers have not properly considered computer CPU style cooling methods.
Recent Reviews: Best Flashlights for Light Painting Photography 2022 // Battery and Charger Buying Guide 2022 // Olight Array 2S Headlamp // Acebeam E70-AL CRI95+ // XTAR VC4SL Charger // Sofirn D25LR Headlamp // Convoy T4,S21D,M3-C // Sofirn IF22A // Ants on a melon RGB Critter
Affiliate links: Olight AU // Olight USA // Acebeam
Instagram: @stephenk_lightart
What would be the purpose of colorful ports?
Reddit | Grizzly’s Reviews | YouTube | Convoy Guide
it needs more fins like the blf gt4 that thing will run hot for sure.
...where Frugal meets with Flashlight!
つ ◕_◕ ༽つ
But does it have secondaries and Anduril?
"America has three cities, New York, San Francisco and New Orleans. Everywhere else is Cleveland."- Tennessee Williams
@tactical_grizzly, looking better, more distinct.
Plain white USB ports are just boring.
My very own high current Beryllium Copper springs Gen 3:
http://budgetlightforum.com/node/67401
Liitokala Aliexpress Stores Battery Fraud: http://budgetlightforum.com/node/60547
@FlashPilot, there’s quite the reason for it: R&D expenditure and ROI time.
If a flashlight design is cheap, then ROI time is low and you still get to get your 300000000 lumens for 0.001 seconds, getting your light to sell a lot and make a decent profit.
If a flashlight design is more expensive and requires some expensive R&D, it’s not really going to make a big difference to the big numbers on the spreadsheet and have much higher ROI time.
My very own high current Beryllium Copper springs Gen 3:
http://budgetlightforum.com/node/67401
Liitokala Aliexpress Stores Battery Fraud: http://budgetlightforum.com/node/60547
why get this over the GT4?
Pros:
Cons:
没有风扇是不是研发实力差了点
The Lumintop GT8 would be nice with XHP70.3, too.
My Youtube channel: Alllightson Reviews
My OL contest builds: 7th 8th 9th
My reviews: Sofirn SP31 V2, Nightwatch NI40, Sofirn C8F 21700, Brinyte WT01, Sofirn SD05,Ti AAA keychain, Sofirn SP33 V3, Skilhunt M150
My video-reviews: Brinyte WT01, Sofirn SD05, Ti AAA keychain, Sofirn SP33 V3
小风扇有用吗？