30Q vs NCR-GA

Franz · December 14, 2016, 1:23pm

I will use them in jetbeam t6, so looking for graphic the GA have almost 400~500mah more (5A discharge) but reading some thread here that battery decrease a good amount after few recharges……

So the 30Q have more concistence in their capacity? It out performs in T6?

The_Miller · December 14, 2016, 3:42pm

Here you go:

Tom E:

Adding latest battery tests, including the protected GA’s just received last night, the LG2’s with solder tops, and 30Q’s solder tops to make the comparison with the LG2’s

Measurement of the Protected GA’s:

Measurement of the HG2’s:

Measurement of the 30Q’s (new cells):

Notes

Those Protected GA’s seem to do well for protected cells, least better than I thought. They even out performed the solder top GA’s. Could be being brand new, charged slightly higher, and the new Seiko high performing protection circuit, or combination thereof.

The last test of the solder top 30Q’s produced the highest amps, even better than the VTC6’s. These are also very new 30Q’s recently bought from GearBest when they had them in the US warehouse. This may have been the first time used as well.

For the most part, lumens output and amps track pretty well.

Edit: Ooops, typo: lumens taken at 30 secs, not 20 secs

Franz · December 14, 2016, 4:28pm

Thanks Miller, you’re always helping

And about durability, the GA’s use an older chemistry and it counts, right?

The price is very close about them, but I try to order 8 in gb (it seems back the shipping to brazil, banggood stop actualy :person_facepalming: ) and I will pay one shipping R$35 :weary: