4k - DIY Special Version of Flashlight - Water Transfer Printing

vietnamreviews · 2019-12-21T14:07:49.000Z

Nice to meet you again. Today I share with you a little trick to make your flashlight stand out. Good luck.
If you missed the previous clip or watch it again.
Thank you for visiting my YouTube channel. I wish you lots of health and happiness.
Wishing you a happy new year and merry Christmas.

Vincent7 · 2019-12-25T03:23:06.000Z

That came out great. I think I’ll try that on one of my lights.
Merry Christmas to you also, and Happy New year.

vietnamreviews · 2019-12-25T03:55:55.000Z

Wishing you and your family a happy life. Don’t skip part 1 it’s extremely important. Good luck.

Vincent7 · 2019-12-25T03:58:31.000Z

Thank you. The best to you and your family also.

Agro · 2020-01-02T10:22:47.000Z

I wouldn’t call it good-looking but it’s definitely interesting. Thank you.

G0OSE · 2020-01-02T10:59:44.000Z

I’ve never done this, but have researched it some time ago when visiting a factory for a client. They used adjustable sized frames in the water.
I think you need to put a ‘frame’ or ‘rack’ around the transfer when in the water to stop it spreading out. Your transfer is spreading out too quickly/wide and is losing it’s definition. Well done for a first attempt though!
A simple version (made from tape) is here -

vietnamreviews · 2020-01-02T11:38:19.000Z

Thank you. If you want to do on the flashlight. You must follow my clip. Because they don’t have base coat. The coating will peel off afterwards.

pinkpanda3310 · 2020-01-02T12:06:23.000Z

That’s cool stuff

Would like to give it a go… one day…