[4K Review] Fitorch P25 "Little Fatty" - HOW NOT TO CARRY IT!!!

Lexel · 2019-01-03T06:28:55.000Z

Depends if this one would fit a replacement driver
If it has separate switch bord likely, if switch on PCB would need enough interest and proper measurements to make one

H-Q · 2020-03-10T18:58:35.000Z

How hard would it be to change this execrable UI to Andúril?
Anyone out there who could change mine?
I could truly love it then

Unheard · 2020-04-16T12:42:39.000Z

Anyone tried replacing the driver?

G0OSE · 2020-04-16T13:00:44.000Z

Unheard:

Anyone tried replacing the driver?

I’d be interested too, the ui is just awful - especially as it’s in some ways the reverse of anduril lol!
I double click and strobes come on when I’m expecting full beam lol, then I press to switch off and it changes modes……makes me look a right muggle lol!
I know, I’m old , dumb and used to Anduril now…… I’d love one in there though with aux if poss, there is loads of room!
Mines actually Boruit, but it’s identical.

Unheard · 2020-04-16T13:41:24.000Z

Switching it directly to low from off means guessing when to release the button. And it takes too long, same for switching it off. OTOH, the locator and voltage indicator are nice features. Keeping them would probably mean editing the source code. Still interested.

G0OSE · 2020-04-17T14:02:46.000Z

As it already has an e switch, theoretically you could put a fw3a driver in, in some kind of holder - not the easiest thing to work on though being inside…… that part sadly doesn’t unscrew and the driver does look like it’ll easily pop out - it looks just a push fit.
Where can you get a driver though lol - anyone got a spare!?
Also I’m disliking these green tinged leds too, more and more as time goes on and I get other lights with nice tints…

Unheard · 2020-04-20T19:29:50.000Z

SST-20 are a very good match for the P25. Much less light (not exactly visible, but I measured only under 1800 lm), but more range. I find it adds the throw I missed from this flashlight.

And the colors are so nice (I got the LEDs from int’l outdoors iirc) …

AWB:

Left: P25, SST-20@4000K, right: C8, XHP50.2@6500K

Unheard · 2020-04-21T14:03:36.000Z

I only now noticed that the red aux LED flashes on high even with fully loaded battery. On approx 3,8V, it flashes rapidly. Is resistance so much lower in SST-20’s that voltage goes down below lower limits?

Hope it will be solved when I got my 26650 extension(*). Not sure.

*) still need a holster for P25 w/ extension. Any recommendations?

Thro · 2020-04-21T14:08:51.000Z

Unheard:

I only now noticed that the red aux LED flashes on high even with fully loaded battery. On approx 3,8V, it flashes rapidly. Is resistance so much lower in SST-20’s that voltage goes down below lower limits?

Hope it will be solved when I got my 26650 extension(*). Not sure.

*) still need a holster for P25 w/ extension. Any recommendations?

i use the sofirn sp33 or convoy C8 holster for my P25 26650

Unheard · 2020-04-21T14:36:32.000Z

Thank you, I even have one C8 holster at home!

deleted-200707 · 2020-04-21T15:46:51.000Z

G0OSE:

Unheard:

Anyone tried replacing the driver?

I’d be interested too, the ui is just awful - especially as it’s in some ways the reverse of anduril lol!
I double click and strobes come on when I’m expecting full beam lol, then I press to switch off and it changes modes……makes me look a right muggle lol!

wle · 2020-04-21T17:39:44.000Z

i could have read and skimmed a text review for what i wanted to know, in 30 sec
i hate videos
what is the cost
what is this weird UI
what is the battery…:?

wle

Unheard · 2020-04-21T18:37:19.000Z

Flashaholics videos are pieces of art. I really enjoy them for what they are. Beside being entertaining and funny (was there a litte Charles parody?), the (to me) most important aspect, the beam, ist well covered.

Thank you, like them a lot .

hank · 2020-04-21T18:50:23.000Z

i could have read and skimmed a text review for what i wanted to know, in 30 sec
i hate videos

Yep. Any video not provided with a text transcript, I usually just skip because I have no idea how much of my time it will suck to find any useful facts.
That’s why text helps — I can get a feel for whether it’s worth watching and listening to a video.

But then, I’m a dinosaur. Nobody reads anymore, I understand.

G0OSE · 2020-04-25T17:13:58.000Z

chinooker:

G0OSE:

Unheard:

Anyone tried replacing the driver?

I’d be interested too, the ui is just awful - especially as it’s in some ways the reverse of anduril lol!
I double click and strobes come on when I’m expecting full beam lol, then I press to switch off and it changes modes……makes me look a right muggle lol!

LOL! yeah, that’s about it!
The funny thing is when I take it to bed ( so as not to wake anyone up with lights) , go to switch it off and on come strobes - the wife loves that at 1am!

Unheard · 2020-05-17T06:10:54.000Z

Using the extension with an unprotected 26650 fixed the voltage warning in my SST-20 P25.

There’s very little space:

No chance a protected cell will fit.

Richard_Noggin_28 · 2020-05-17T06:27:33.000Z

I love the shape, size & output of this light. The UI is utter shit & would love there to be a way to put Anduril or similar on it.

Unheard · 2020-05-17T06:45:18.000Z

Richard Noggin 28:

I love the shape, size & output of this light. The UI is utter shit & would love there to be a way to put Anduril or similar on it.

Welcome to the club. There’s a switchboard soldered onto the driver PCB, so no off-the-shelf replacement driver available. I guess customizing the software would require reverse engineering of that driver circuit, and making a new driver assembly will require a too large a number of customers :weary:

Someone should ask Fitorch for a BLF P25 version

G0OSE · 2020-05-17T10:13:51.000Z

Mines currently having surgery with Dr.CRX to replace it’s poorly led’s which some moron managed to pull the lenses off…… Still, I wanted them replaced anyway. 4 X SST 20 4k’s going in.

Unheard · 2020-05-17T11:21:48.000Z

You’ll love it.

… except for the blinking indicator LEDs