ALIVE: Haikelite MT07S only  US$46.72

Ocelot · 2018-06-12T14:28:31.000Z

(Sigh)

Really sorry to hear about your situation, FlashTom and CoolJB.

I ordered a white NW XHP35 MT07S on 5/24, and received it on 6/7, paying a few bucks for the Expedited shipping option, and it had the exotic braided paracord both pictured on the BG site and as above. I am very happy with the light, but I cringe at the negative experiences others are having with problems ordering and the whole SC26 fiasco... I can only hope these get resolved somehow, but now I’m leery of HL/BG for the future.

I still I’ll stand by the otherwise very good quality of build quality and performance of the 2 HL I do have, yet these negatives affecting others is not a good omen.

Lux-Perpetua · 2018-06-12T14:54:36.000Z

I just checked the stock situation on all versions of the MT07S. They are all OOS and on „arrival notice“ right now without any predictable date for stock replenishment.

Speed4goal · 2018-06-12T15:04:46.000Z

Damn I waited to long to jump on this deal. I didn’t think haikelight would go belly up they seemed to do well. Really wanted a xho35 one. I have a 70.2 one. Might buy a second 70.2 if I can find one. I’d like to MOD one with the ta driver and keep one stock

BlueSwordM · 2018-06-12T15:05:06.000Z

I do not doubt you will get your lights.

It’s the same thing which happened with the BLF Q8 during the Christmas shopping season: there were over 6000 preorders, and every time, the preorder date got pushed.

It’s probably the same thing which is happening with the MT07S: it racks up a lot of preorders, and boom! preorder date gets pushed.

MaksVasilev · 2018-06-12T16:02:46.000Z

I order MT07S White in 31.05 but still not sended and now BG close preorder for this. :rage:

CoolJB · 2018-06-12T16:08:54.000Z

Ocelot:

(Sigh)

Really sorry to hear about your situation, FlashTom and CoolJB.

I ordered a white NW XHP35 MT07S on 5/24, and received it on 6/7, paying a few bucks for the Expedited shipping option, and it had the exotic braided paracord both pictured on the BG site and as above. I am very happy with the light, but I cringe at the negative experiences others are having with problems ordering and the whole SC26 fiasco… I can only hope these get resolved somehow, but now I’m leery of HL/BG for the future.

I still I’ll stand by the otherwise very good quality of build quality and performance of the 2 HL I do have, yet these negatives affecting others is not a good omen.

Thanks. I placed my order on 5/22, 2 days before you, and still missed out. I didn’t pay for expedited shipping. Is that the reason I missed out?

M4D_M4X · 2018-06-12T17:17:41.000Z

I ask banggood about the situation tomorrow

CoolJB · 2018-06-13T04:51:44.000Z

The plot thickens - NW version shows “In Stock” now and you can buy it instead of preordering… Still no shipment confirmation for me though.

BlueSwordM · 2018-06-13T04:55:12.000Z

24 hours processing

Seems like no problem there. Banggood ALWAYS shipped items within 24 hours when that sign was up.

M4D_M4X · 2018-06-13T05:40:14.000Z

ALL will be shipped this week

MaksVasilev · 2018-06-13T07:19:13.000Z

M4D M4X:

ALL will be shipped this week

~~Only black version now, but white still “Under Restocking”. It’s possible white version can shipped too?~~

1 minut ago white version shipped. Thanks for info.

Lux-Perpetua · 2018-06-13T07:29:28.000Z

I confirm my MT07S XHP70.2 NW has been shipped, too.
Thank you for asking BG, Martin! :+1:

CoolJB · 2018-06-13T14:05:19.000Z

Got my shipping notification too! :+1:

Thanks again Martin!

Lux-Perpetua · 2018-06-19T18:10:10.000Z

Today I received my MT07S XHP70.2 NW. So far, everything looks fine except for two imperfections in the reflector, see picture below. I hope these will not have any negative influence on the beam. Is this normal in terms of manufacturing tolerances or a reason one could seriously complain about?

BlueSwordM · 2018-06-19T18:12:05.000Z

Normal. As long as it does not manifest itself in the beam, it is okay.

Speed4goal · 2018-06-19T18:28:35.000Z

Just ordered a black nw xhp 35 thanks for this deal. I was pretty bummed out about it, it was looking haikelite was in trouble. Glad to see there making new product. I checked yesterday and it said in stock 24 hours processing time. Wife got it for me for my birthday today.
Using mad Maxs aff link of course. This will put those new vtc5s to good use.

Speed4goal · 2018-06-19T18:31:14.000Z

Every once in awhile a light will come with a minor imperfection in the reflector or finish. Just part of mass production. I see it with the convoy host every 1 in 10 host has a blemish like that on the reflector I’ve never seen it make a difference in the beam

Lux-Perpetua · 2018-06-30T18:13:03.000Z

I tried out my MT07S and found out that mine has some quality issues:

The flashlight makes a terrible rattling noise when I shake it back and forth, see youtube video: https://youtu.be/639NbOIsWG0

The reflector has two minor imperfections, not really a problem but ugly somehow

The dome of my XHP70.2 has a scratch on it

The side switch blinks blue even with almost fully charged (4.09V) protected Imalent 18650 cells. According to the manual it should not start to blink before the capacity is down to 50 percent.

hIKARInoob · 2018-06-30T18:22:41.000Z

FlashTom:

The side switch blinks blue even with almost fully charged (4.09V) protected Imalent 18650 cells. According to the manual it should not start to blink before the capacity is down to 50 percent.

This is a common problem I’ve discovered. You can “reset” this fault by physically removing the battery tube from the head (not just loosening 90 degrees) for a second or so, and tightening again. The light will turn solid blue again. However, after fondling with output the battery indicator will start blinking again as if battery voltage is below something like 3.7V (~50% capacity).
You can see this problem in this video here as well:

[video:]https://www.youtube.com/watch?v=56MWRHYo_2g[/video]

- batteries inserted at 6 min. 45 sec.

- switch on at 7 min. 16 sec. ==> solid blue light

mode switching at 7 min.43 sec., and at the 8 minute mark he finishes cycling modes and the button isn’t solid blue anymore.

Exact same issue with the SC26 (original version) in this video:

[video:]https://www.youtube.com/watch?v=dbZHhvKlkW0[/video]

I’ve done two driver swaps for the MT07S, and the problem is still present unfortunately.

Lux-Perpetua · 2018-06-30T18:37:27.000Z

Thank you very much hIKARInoob! It worked! :+1: