Alkaline Battery Lights

ggf31416 · 2018-04-23T15:42:27.000Z

Henk4U2:

Please read post #4: an XM-L2 needs something like 3A to reach its full potential. Alkaleaks can’t do that, not for a prolonged period of time.

Of course the runtime and brightness will be compromised but it isn’t like the light won’t turn on on alkalines if you are in a situation where they are the only battery available. I wouldn’t run it on turbo or high on alkalines if I needed the batteries to last but saying that they can’t be used is an overstatement.

WalkIntoTheLight · 2018-04-23T16:07:31.000Z

Stick with Eneloops. They’ll vastly out-perform alkaleaks, and will stay charged for 10 years in storage. If your wife insists on using alkaleaks, head straight to a lawyer specializing in family law. (Grab your flashlights on the way out.)

andrew124C41 · 2018-04-23T16:15:57.000Z

“2/9 Fox Co (2009-2015) Semper Fi 0311/0331 Rifleman/Machine Gunner
Blf has changed a lot since I’ve been here. Lots of snow flakes and easily offended over nothing. When the forum use to be great and people joked around and could take a joke. It’s a forum it’s not that serious. Let’s make BLF great again!”

This is the world we live in where feelings dictate over facts. NYC has 31 pronouns for genders. While I no longer live in NYC, these laws can spring up everywhere. However, don’t expect me to ever use anything other than the indefinite pronoun ’he” in my professional writing. I stopped using he or she long ago. Interestingly, I have yet been called on in in my Quora posts.

andrew124C41 · 2018-04-23T16:23:16.000Z

Parametrek:

Right now I have 388 AA powered lights in my database. Here they are sorted by throw. There are a few that perform better than the TN4A but they all cost much more.

That is quite a database you have there. Is it possible to put in multiple parameters or only one?

andrew124C41 · 2018-04-23T16:43:34.000Z

WalkIntoTheLight:

Stick with Eneloops. They’ll vastly out-perform alkaleaks, and will stay charged for 10 years in storage. If your wife insists on using alkaleaks, head straight to a lawyer specializing in family law. (Grab your flashlights on the way out.)

My wife is really pretty sharp. She just mentioned that she had heard that lithium primaries, the same ones used for smoke alarms, hold a charge a long time.

I mostly use IMR and INR batteries for lasers because of the high current drain.

I had heard of Enloops but did not realize they hold a charge for so long. I charge my lith ions with a PSU using a two phase starting with constant current (should the batteries drop that low,) than a saturation charge at constant voltage.

andrew124C41 · 2018-04-23T16:48:29.000Z

Is there a consensus regarding lithium primaries vs enloops….if the light just sits in the glove box I would guess the former…

hIKARInoob · 2018-04-23T17:01:24.000Z

andrew124C421:

Is there a consensus regarding lithium primaries vs enloops….if the light just sits in the glove box I would guess the former…

I think it should not matter. But beware of parasitic drain. There are plenty of lights that will completely drain the batteries after a couple of months or a year or so.

beam0 · 2018-04-23T17:10:17.000Z

andrew124C421:

“2/9 Fox Co (2009-2015) Semper Fi 0311/0331 Rifleman/Machine Gunner
Blf has changed a lot since I’ve been here. Lots of snow flakes and easily offended over nothing. When the forum use to be great and people joked around and could take a joke. It’s a forum it’s not that serious. Let’s make BLF great again!”

This is the world we live in where feelings dictate over facts. NYC has 31 pronouns for genders. While I no longer live in NYC, these laws can spring up everywhere. However, don’t expect me to ever use anything other than the indefinite pronoun ’he” in my professional writing. I stopped using he or she long ago. Interestingly, I have yet been called on in in my Quora posts.

Although I somewhat agree, I don’t understand where this is coming from here, how it pertains to this thread? Did I miss something? (Maybe someone deleted their post?)

wle · 2018-04-23T17:19:45.000Z

so far no one has mentioned another obvious choice - solar recharging. there are many options.
no need for alkaline, is the point.

wle · 2018-04-23T17:23:00.000Z

the CR123 primary cells do hold their charge a long time and as far as i know do not leak.

they also tend to hold more energy than same-size 16340 li-ion, though the voltage is lower.

and their capacity does not diminish much in cold weather

ideal for the car

and of course the lights that use them can be very small

wle

andrew124C41 · 2018-04-23T17:30:12.000Z

hIKARInoob:

andrew124C421:

Is there a consensus regarding lithium primaries vs enloops….if the light just sits in the glove box I would guess the former…

I think it should not matter. But beware of parasitic drain. There are plenty of lights that will completely drain the batteries after a couple of months or a year or so.

Are you talking about lights with some tail light that stays on or something else?

wle · 2018-04-23T17:36:05.000Z

some lights keep their microprocessor on, just to monitor the switch

better designs will ‘sleep’ the micro in a lower power mode, and pressing the button will cause it to wake up and start running the light, using more computing power

as far as specific lights, you would have to know about the design to really know where the drain might be, and the reason

older controllers may not have supported ‘sleep mode’, or the programmer didn;t bother to use it, or it could just be a circuit error, or as you said, any LEDs that stay on like in the button

wle

hIKARInoob · 2018-04-23T18:36:35.000Z

andrew124C421:

hIKARInoob:

andrew124C421:

Is there a consensus regarding lithium primaries vs enloops….if the light just sits in the glove box I would guess the former…

I think it should not matter. But beware of parasitic drain. There are plenty of lights that will completely drain the batteries after a couple of months or a year or so.

Are you talking about lights with some tail light that stays on or something else?

Lights with a side switch consume a tiny amount of power, even if the light is off. With an old school clicky switch, the electric circuit is open when light is off, so drain is zero.
But this is not the case with lights like the TN4A. One problem is that the parasitic drain value of a light is rarely specified by a manufacturer. Another problem is that the parasitic drain value can vary significantly from sample to sample, even though the light output is identical.
So basically the parasitic drain is one big unknown when purchasing a light. And this is a bad combination with a light that you want to leave in the glove compartment and forget.
An easy remedy with a light like the TN4A is to slightly unscrew the battery tube, so you have an open circuit for zero drain. But you must keep this in mind.

mmalive · 2018-04-23T18:53:58.000Z

I agree with all comments about ” Alkaleaks ” These type of batteries leak over time. Shelf life is minimal. If you value any of your flashlights do not use them. I will give you some examples below of my personal experiences of ” Alkaleaks ” I love all my flashlights whether high end or economy class.

1. My Police Security Silver 6 D flashlight leaked right from factory. Brand spanking new. I opened tail cap because it would no light up. Corrosive battery acid ate into wall lining inside damaging. Thank god only 3 of them leaked as I was able to remove them. BTW, this flashlight is extremely hard to find and not in production anymore.

2. Maglite 3 - 6 D flashlight. Same scenario as above.

3. Nitecore E41 4 AA same problem

4. Maglite XL50 3 AAA same problem.

As you can see Alkaleaks are very bad.

I will use them only in cheapo, or extremely low quality light. I pick up free battery packs from Harbor Freight for those purposes.

Use recharge ones : Energizer, Eenolops, Duracell, Lithium, etc….

Speed4goal · 2018-04-23T19:45:50.000Z

beam0:

andrew124C421:

“2/9 Fox Co (2009-2015) Semper Fi 0311/0331 Rifleman/Machine Gunner
Blf has changed a lot since I’ve been here. Lots of snow flakes and easily offended over nothing. When the forum use to be great and people joked around and could take a joke. It’s a forum it’s not that serious. Let’s make BLF great again!”

This is the world we live in where feelings dictate over facts. NYC has 31 pronouns for genders. While I no longer live in NYC, these laws can spring up everywhere. However, don’t expect me to ever use anything other than the indefinite pronoun ’he” in my professional writing. I stopped using he or she long ago. Interestingly, I have yet been called on in in my Quora posts.

Although I somewhat agree, I don’t understand where this is coming from here, how it pertains to this thread? Did I miss something? (Maybe someone deleted their post?)

It doesn’t pertain to the thread many blf threads get sidetracked. But it’s his thread to side track I guess. He just noticed my signature. I’m about to start a thread soon. Bringing all the snow flakiness to everyone’s attention in my 1000 post giveaway. It’s going to be a unconventional giveaway to say the least. I’m interested to see if the snow flakes will cry and ruin it for everyone. I’ll drop a hint it’s a light with a dedomed emitter that can’t be purchased anymore and people I’ve seen offer 5 to 10x the cost of the led. So it’ll be ashamed if people and their high estrogen ruin it. But it may not be the snow flakes fault completely. Soy is in every single processed food we eat. 99 percent. Soy significantly raises estrogen and lowers testosterone. Also the chemicals in plastic which is in everything we use in day to day life. Break down into estrogen into the body. So all these “men” in their feelings might not be all their fault completely. Or maybe I’m just a hard ass Marine that’s seen and done things people can’t imagine and words on a screen don’t bother me so much. Only person who can hurt me with words is my wife.

Phlogiston · 2018-04-23T19:45:09.000Z

If you’re worried about an emergency situation where you might have to make do with whatever cells you can find, I would suggest that you consider having two lights: one light that takes 3×AA or 4×AA, and a second light that takes 1×AA.

That way, if you only have one cell, you can still use the 1×AA light. If you have 3 or 4 cells, you can use the larger light for higher efficiency and access to higher light output (if you need it).

Efficiency is especially relevant with alkaline cells, because the boost driver in a 1×AA light trades current for voltage - it has to draw more current at the input to get more voltage at the output. That’s about the worst thing you can do with an alkaline cell, because its high internal resistance will cause its voltage to drop at higher current, so the driver needs even more current, which causes the cell voltage to drop still further, and so on into a vicious circle. NiMH cells and lithium cells are much less prone to this effect.

I would strongly recommend avoiding alkaline cells unless it really is an emergency, because of the risk that they will leak.

My advice is to put Eneloop NiMH in both lights, with an unopened pack of 1.5V Energizer Ultimate Lithium primary cells in a Ziploc bag stored next to each light. That way, the lights are ready for use, and you have a set of long shelf life cells ready as a backup.

Swap the Eneloops for a fresh set once a year, as a “belt and braces” precaution. They do hold a charge for up to 10 years, but there’s always an outside chance that even the best quality product might fail on you. It’s a fact of life that nothing’s perfect.

Steer clear of lights that take more than 4 AA cells, unless they can be used with a partial set. You might not be able to get your hands on 6 or 8 AAs at once in an emergency. For example, I have an old Fenix TK41, which is an 8×AA light, but I’m fine with that because it can run on 4×AA if necessary.

cu42 · 2018-04-23T19:45:35.000Z

Alkaline are yuk.
Lion and solar charger. win.
Make sure to get a light with lockout tailcap for 0 parasitic drain.

cu42 · 2018-04-23T19:47:23.000Z

Parametrek:

Right now I have 388 AA powered lights in my database. Here they are sorted by throw. There are a few that perform better than the TN4A but they all cost much more.

Impressive.
Thanks!

Speed4goal · 2018-04-23T19:49:38.000Z

hIKARInoob:

andrew124C421:

hIKARInoob:

andrew124C421:

Is there a consensus regarding lithium primaries vs enloops….if the light just sits in the glove box I would guess the former…

I think it should not matter. But beware of parasitic drain. There are plenty of lights that will completely drain the batteries after a couple of months or a year or so.

Are you talking about lights with some tail light that stays on or something else?

Lights with a side switch consume a tiny amount of power, even if the light is off. With an old school clicky switch, the electric circuit is open when light is off, so drain is zero.
But this is not the case with lights like the TN4A. One problem is that the parasitic drain value of a light is rarely specified by a manufacturer. Another problem is that the parasitic drain value can vary significantly from sample to sample, even though the light output is identical.
So basically the parasitic drain is one big unknown when purchasing a light. And this is a bad combination with a light that you want to leave in the glove compartment and forget.
An easy remedy with a light like the TN4A is to slightly unscrew the battery tube, so you have an open circuit for zero drain. But you must keep this in mind.

Yes my tn4a has bad drain in it. I’ll put batteries in it. Come back maybe 5 6 weeks give or take and it’s on the red. It will still run for awhile but I can’t get into turbo. So now I leave it backed off half a turn or so. Now my nitecore ea41 can sit for twice as long without having low barriers. But as you said it can vary sample to sample. I don’t lock it out physically or electrical it can do both. I can’t remember if the tn4a has a switch lockout

beam0 · 2018-04-23T21:17:27.000Z

Speed4goal:

It doesn’t pertain to the thread many blf threads get sidetracked. But it’s his thread to side track I guess. He just noticed my signature.

“pertains” was maybe the wrong word but I couldn’t think of the right word, I didn’t mean sidetracking/derailment whatever, I was curious what he was replying about here, thought it was odd for that to just come “out of the blue” but I never noticed your sig so that explains it, thanks.