AUX Lights on D4S

I just flashed my D4S with the latest firmware (09-28-2009) and I’m not sure that the AUX lights are working correctly. If I hit 4 clicks from off, I get an alternate high-low blinking. If I hit 4 clicks again, I get low. If I hit 4 clicks again, the process repeats. Is this how it should be working and how do I turn the AUX lights off ?

Thanks,
Mike

4 clicks from off goes to lockout mode, then another 4 clicks goes back to the normal operation mode. It indicates the two different states by using two different patterns on the aux LEDs.

To turn off the aux LEDs or cycle them through different modes, try 7 clicks from off (or 3 clicks during lockout mode).

Thanks TK

Mike