avrdude telling me i have a different signature

Flashlight Modding and DIY Parts
1

is this okay? trying to figure out how to to get lfuse and hfuse details.

C:\Users\skolo\firmware>avrdude -p t85 -c usbasp -n -F

avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.06s

avrdude: Device signature = 0x000102
avrdude: Expected signature for ATtiny85 is 1E 93 0B

avrdude: safemode: Fuses OK (H:FE, E:00, L:FE)

avrdude done. Thank you.

2

I fixed it, error on my part of having the RST pin in the wrong hole.

C:\Users\skolo\firmware>avrdude -p t85 -c usbasp -n

avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.06s

avrdude: Device signature = 0x1e930b

avrdude: safemode: Fuses OK (H:FF, E:DE, L:E2)

avrdude done. Thank you.

3

I think this avrdude person is blind.

You don't even have a signature!