BLF Interest List: EX3 High Current Beryllium Copper Silver Plated springs - Still selling my springs :)

BlueSwordM · 2019-09-12T02:41:50.000Z

Members that never came back to the forum, and did not respond after 2 weeks.

Anyway, I messaged them all three times, and they never responded.

Checked them from previous group buys, and never found any payments from them.

likevvii · 2019-09-13T08:56:28.000Z

Payment sent

Texas_Ace · 2019-09-14T13:18:10.000Z

I am not sure where you sign up for the FC40 LED group buy. I would like 2x of the A4 bin LED’s.

chops728 · 2019-09-14T13:52:38.000Z

Interested in;

6 x GT FC40 4000K

20 x LH351D 4000K

BlueSwordM · 2019-09-14T14:08:08.000Z

You don’t anymore.

BlueSwordM · 2019-09-14T14:12:11.000Z

WTS/GB: [4000k ARRIVED, Test Report's In] GT-FC40 (a.k.a. XHP70's flattop, 12v 40w sister) 95 CRI, Available in 4000k, 5000k Want to Sell

I have an important update over the situation I asked the manufacturer about the tint control. They said that they might not be able to control the tints well enough and can only guarantee <6 SDCM color matching. 6 SDCM technically confines within A4/A5 bin, but that itself is a rather large area so some of you might actually get fairly yellow ones. I asked them if they can group them, which they could. However, I must pay the labeling cost. The binning will separate the LEDs with <4.5 SDCM f…

Texas_Ace · 2019-09-14T14:12:30.000Z

BlueSwordM:

You don’t anymore.

Was my prior interest in 1x 4000k and 1x 5000k put on the list? I did not see my name on it when I looked before?

BlueSwordM · 2019-09-14T14:14:40.000Z

Not that, look at the link.

The GB for the FC40 on my part is done. Not doing it anymore.

Texas_Ace · 2019-09-14T14:23:58.000Z

Oh, I never really understood the outcome of that post and what it meant for the GB.

chops728 · 2019-09-14T14:26:08.000Z

I guess something is lost in the translation —-Made me wonder to

What about the LH351D 4000K—-You still looking into them

BlueSwordM · 2019-09-27T01:06:55.000Z

Ok then.

Orders with only springs will be shipped this Monday.

Those with LEDs will have to wait since there’s a customer who requested the last LEDs, and he payed on Tuesday, so will ship on Friday.

jericho0o · 2019-09-21T06:02:46.000Z

Hey BlueSword the XHP70.2 high CRIs are 3.7 V right? Can you pls put me down for 5 of those

And for those dream LH351Ds count me in for 25!!!

BlueSwordM · 2019-09-21T14:53:13.000Z

No, sorry. No GT-FC40 GB here.

And no problem for the LH351D.

I should be getting an answer of the amount of LH351Ds needed.

If it’s more than 1000pcs at a time, then it’s not realistic.

SKV89 · 2019-09-21T16:48:08.000Z

I thought normally, the more you order the easier it is to get the binning you want. So in the case of the LH351D, is it because these dream bin are already produced and only a handful of them are left and cant be made anymore?

gcxmr2 · 2019-09-26T16:58:17.000Z

Do these springs fit the FW3A? I’ve melted mine and need replacements.

BlueSwordM · 2019-09-26T17:10:21.000Z

Not in the stock FW3A unfortunately.

BlueSwordM · 2019-09-26T17:11:12.000Z

How did you melt them though?

They’re BeCu springs inside too. You’d have needed a massive short with a very high drain cell to have caused any damage

gcxmr2 · 2019-09-26T17:36:15.000Z

BlueSwordM:

How did you melt them though?

They’re BeCu springs inside too. You’d have needed a massive short with a very high drain cell to have caused any damage

Yeah… Well, I was swapping out the leds using Mtn boards and didn’t realize that one of the stars didn’t match up to the markings on the leds. When I turned on the light, it immediately got hot and I turned it off. I had a Samsung 30q in the light. Took it apart and the springs were flat.

BlueSwordM · 2019-09-27T01:11:40.000Z

Springs package official shipped from post office:
contactcr: September 16th

SST-20s packages to be officially shipped from post office on Friday September 27th:
KevinZA
Lund1660
likevvii

Last SST-20s will be shipped tomorrow.
Didn’t even keep some for myself, but I don’t care, especially since I decided to make another SST-20 FD2 GB, although in December.

Also, some other news.

The LH351D dream bin needs to be order in quantities of 2000pcs.
Therefore, until I have enough funds to buy without a GB, since these are more expensive than even the LH351Ds payed from AEDe.

They’re quite a bit more expensive, but that would be worth it since these are rather high brightness binned, and more importantly, color tint bin is superb.

Anyway, I’ll close the SST-20 FD2 GB since there are no more LEDs to be sold anymore.

moderator007 · 2019-09-27T01:25:05.000Z

Is there anyway you might be able to get a sample of the LH351D dream bin. If it tested really good, I will double my order, which with good test results I’m sure others might get more interested and want more, that might get you alot closer to 2000pcs.