BRAVO,BRAVO to Wurkkos.👍👍👍

LED Flashlights – General Info
1

My FC13 worked for about 2 and 1/2 days and then got progressively worse in about 4 or 5 hours. By the end the only thing that worked was on and off and Moonlight mode. The rest of all the options, programming was nill.

I sent them a message and emailed them a video. The gentleman named Eric replied back.

He just sent me another email and said he showed it to the technical support and they said it’s a faulty driver and they will be issuing me a new :flashlight:.:blush:

I expressed my concern about the cost of shipping that back to China versus the value of the light. It wouldn’t be worth it and I should not be penalized for receiving a faulty light. Apparently he agreed with that to my delight.

Two other Chinese companies I could think of didn’t do that and refused to do that. It Would have been about $75 to send this Haiklight back. I don’t remember the model for Haiklight but it had four LEDs and took eight batteries.

I Can’t recall the light from banggood but it was about $35 to send that back.

I terminated business with banggood and Haoklight forever.

I’m very pleasantly surprised and impressed with Wurkkos.:clap::ok_hand::+1:

A few beam shots the first night I had it. There was a lot of bugs and humidity in the air. I’m sure I’ll get better ones on a cooler night.

20230703_045057
20230703_0450571920×3413 746 KB

20230703_051004
20230703_0510041920×3413 721 KB

20230703_051023
20230703_0510231920×3413 714 KB

20230703_051027
20230703_0510271920×3413 737 KB

3 Thanks
2

I forgot to add that I really do like this light. It’s a great dog walking light with a lot of power. I can get about 2 minutes of Turbo before the thermo step down sets in. The handle isn’t that hot and uncomfortable at that point it’s the head that’s scalding… I have it set at 70c.

Those run time numbers will improve as the temperatures drop in the months to come.

It was 79° on my loft. Tail stand. No fan. I was able to run it for 1 minute and 40 seconds before thermal step down kicked in.

My cumulative Max runtime with a Molicel P28A button top was 11 minutes with a voltage of 3.65 volts.

On the trail the light is on a low COOL DOWN MODE for ~60% of the time and turbo ~40% of the time. That means I’ve gotten 22 to 25 minutes out of each battery.