budget yuji high cri 5mm leds confirmed

I hear ya, that’s why I didn’t post links. Ali links always seem to break when I post them from my phone.

How do you know it’s hi cri led?

The original seller claims ra75.
They have greatly improved color rendering over any other 5mm I have used.and they lack that cold blueish tint.
These were for high end photographic lights.

I built myself some little Modules for photography - they are extremely good.
I would say, the CRI is easily over 90 and they are perfect for lighting stuff for photos or in glass cabinets

Only link I could find to that part number was : http://www.ebay.com/itm/100Pcs-F5-5MM-White-Color-White-Light-Round-Superbrigh-t-LED-Lamp-/181935336943?hash=item2a5c30edef:g:UCoAAOSwnGJWTDrq

Anyone know if these are the right thing? How do we know they are in fact high CRI, I didn’t see it mentioned in either the old ad or this one?

I would not mind having some neutral/warm white high CRI 5mm LED’s around. I figure I can rebuild some of the many 9 LED lights I have laying around if nothing else.

if the part number shown in the listing is what they ship then yes they are the part i posted.
might want to ask seller if this is the case.
the bag shown is not what i bought.

My anti-static bag has a similar looking label, but says “LED LAMPS” at the top and has the information that is in the Description section of that Ebay ad. So as snakebite says, if the description is accurate, those are the LED’s you want. If the picture is accurate, those are not the LED’s in the OP.

Just checked the ali site on PC that I mentioned earlier, the seller was Power Magic but they no longer have any items for sale.

Both links in the original post go to pages for items no longer offered for sale on eBay

search for JNL5254CHLGW5007-CA4
other sellers have them.

I can confirm after ordering then that these are NOT high CRI LED’s. Just you basic 5mm cool white LED’s. Nothing notable at all about them, looks just like the ones in the picture.

I guess the search is still on for a real supplier of them.

they are back

Great, ordered a set, now to see how long shipping takes. lol

The LEDs from OP are back as well

Well I ordered one of those as well, guess it is a race to see which comes in first. Figure I can use them to build an LED cube if nothing else.

seems all the sellers went away then came back at once.since they all use the same pics and sell the same photo lights the leds are the same.
if so now is the time to load up once these 2 orders arrive and are what i got when i posted these.
my orders came very fast.

did you get your order?

Not yet, unfortunately. Shipping is unusually slow these days, I have yet to receive anything ordered since late June.

they do shoot a bit of light out the back.
i spraypaint my boards white before installing the leds.
a radioshack round prototype board loaded with 36 of these parallel with a .47 resistor in series works great in a versapak flashlight.
and can double as a video light.i shot some video of the first startup of a friends chevelle we rebuilt with that light.minimal glare off chrome valve covers,ect.

Put one of these LED’s in one of these lights. First tried a Red LED, but just couldn’t see what was needed. With this LED, got about 1/2 lumen of perfect light that didn’t wake me up or run my night vision. Thinking about putting in a “Police” light to get a little more concentration of light from the reflector. On a side note, if you haven’t played with those motion detectors, you should. They are so easy to use and have a lot of potential uses since they can take up to 24v.