Charger for 21700

Agro · 2018-07-01T09:14:38.000Z

tatasal:

Satan@103TFS:

You mean charge 21700 in Zanflare F1 flashlight ?

I think he means the Zanflare C4 charger perhaps…

Indeed. :person_facepalming:

Lux-Perpetua · 2018-07-01T09:22:25.000Z

I hardly managed to get those protected Acebeam 18650s into the C4. I never thought it would be possible to squeeze 21700 into it.

tatasal · 2018-07-01T09:31:52.000Z

The upcoming MiBoxer C8, an 8-bay version of the C4 series, is designed with the 21700 cell in mind.

Satan · 2018-07-01T09:33:03.000Z

8 slot seem to much for my need , Anyone try Lii-500 ?

Agro · 2018-07-01T09:33:11.000Z

FlashTom:

I hardly managed to get those protected Acebeam 18650s into the C4. I never thought it would be possible to squeeze 21700 into it.

Protected 18650 tend to be about as long as 21700.

RaVeN · 2018-07-01T10:16:17.000Z

The SkyRC MC3000 should fit 21700 right?

Zulumoose · 2018-07-01T10:20:34.000Z

As a last resort you could always use an 18650 charger with wires from each bay to a 21700 holder, should be easy to rig something up. The charger won’t know the difference.

vidramon · 2018-07-01T12:57:54.000Z

Satan@103TFS:

8 slot seem to much for my need , Anyone try Lii-500 ?

I can try tonight in Lii 500 and Zanflare C4 but I don’t know which brand do you have 21700 so maybe your will be a little longer or shorter… Don’t know how much it will helps to you…

Satan · 2018-07-01T13:43:33.000Z

Thanks vidramon the one I order was this https://www.aliexpress.com/item/-/32855373702.html?spm=a2g0s.13010208.99999999.344.292a3c004apcbz

maukka · 2018-07-01T14:29:01.000Z

FlashTom:

The C4-12 should be fine. MiBoxer claims their charger is suitable for the new cells. Costs would be around $ 30 - 40.

Unprotected 21700 is fine. Acebeam 5100 mAh doesn’t fit.

Same goes for the Lii-500 and Esyb E4.

RaVeN:

The SkyRC MC3000 should fit 21700 right?

Unprotected 21700 is fine. Protected button top Acebeam 5100mAh doesn’t really fit but still makes contact and is able to charge.

vidramon · 2018-07-01T15:03:15.000Z

Satan@103TFS:

Thanks vidramon the one I order was this Page Not Found - Aliexpress.com

I remember that I was charging my 21700 but not sure if I use lii 500 or F4. I will check and post back to you results and dimensions of the cell.

Satan · 2018-07-01T17:03:14.000Z

SkyRC MC3000 is too much cost for me , hope Lii-500 fit as maukka said my cell is unprotected

2_DOGS · 2018-07-01T18:01:03.000Z

My longer 26650 batteries measure 26700 and my Lii-500 has about 2 mm to spare so it should work OK.
21720 would be pretty tight.

HKJ · 2018-07-01T18:10:37.000Z

I would suggest starting your search here: Round cell charger index
Click twice on the battery length column.

vidramon · 2018-07-01T22:41:57.000Z

I test in couple of chargers, but 20700 battery, the length is the same so no problem in that way.

From left to right : Samsung 30Q, Protected Xtar 18650, Sanyo 20700.

Protected 18650 :

Sanyo 20700 :

Lii 100 - no fit
Lii 202 - will fit very very barely ( I do not recommend ! )
Lii PL4 - will fit without no problems
Lii 500 - will fit without no problems
Zanflare C4 - will fit without no problem ( less space stays than on Lii 500 and Lii PL4 )

I have more chargers but they are 500mA max and I don’t test in them since this is slow charge for this kind of cells.

Satan · 2018-07-02T03:43:44.000Z

Thanks HKJ vidramon that :+1:

Lightbringer · 2018-07-02T03:59:22.000Z

Just charge, or do all the analytical foo-fa?

For just charging, worse comes to worse, a Folomov A1. Magnetic snap-thingies that’ll charge one cell in a pinch, regardless of the length (within reason).

Otherwise, any charger that’ll hold a fat 26650, and fit a long protected panny-B (longest beasties I know of).

nodoubt · 2019-06-15T20:55:00.000Z

maukka:

FlashTom:

The C4-12 should be fine. MiBoxer claims their charger is suitable for the new cells. Costs would be around $ 30 - 40.

Unprotected 21700 is fine. Acebeam 5100 mAh doesn’t fit.

Same goes for the Lii-500 and Esyb E4.

RaVeN:

The SkyRC MC3000 should fit 21700 right?

Unprotected 21700 is fine. Protected button top Acebeam 5100mAh doesn’t really fit but still makes contact and is able to charge.

21700 will NOT fit rc 3000.
i just got acebeam h30 headlamp, and the battery is too big to fit
its 5100 mah 21700 button top

BOMBAY · 2019-06-16T00:16:35.000Z

vidramon:

I test in couple of chargers, but 20700 battery, the length is the same so no problem in that way.

From left to right : Samsung 30Q, Protected Xtar 18650, Sanyo 20700.

Protected 18650 :

Sanyo 20700 :

Lii 100 - no fit
Lii 202 - will fit very very barely ( I do not recommend ! )
Lii PL4 - will fit without no problems
Lii 500 - will fit without no problems
Zanflare C4 - will fit without no problem ( less space stays than on Lii 500 and Lii PL4 )

I have more chargers but they are 500mA max and I don’t test in them since this is slow charge for this kind of cells.

lii-500 with lii-40A 21700 70.4 mm long - can be loaded but it is very tight, so strained until it causes small dents in the cell, I do not recommend

lii-500 with sofirn 21700 4000mAh 70.7mm length - you do not put in the charger, it is too long

Blggg · 2019-06-16T08:27:44.000Z

I have Xtar MC1S and it can accept Lishen 21700, which is 71mm long, just fine (with about 0.5-1 mm to spare), but it won’t accept protected cells. Xtar is also having PB2S coming out.