Cheapie 2A East 092 drivers from FT mod

So I get one of these drivers hoping for the elusive 4+ amps for ~$3.00. Well that was years ago when people were getting the GOOD east 092's. So of course it weighed in at its 2 lousy amps. I began reading some forums here on the subject herein. Some people are just shorting the gate to +BAT voltage. I choose not to abuse my emitters that way. Someday I probably will get on the band wagon, but for now I like playing it safe. Being a conservative kinda guy, I instead put a couple parallel R100's resistors in there making R050 ohms instead of a direct path. Good news! I'm getting the amps I want now. Around 3.5+. Such a simple and cheap mod to do. I turned it on for around 5 minutes and the fet was maybe slightly warm.

So, for 3 dollars, couple of resistors and maybe 6mm of wire I have a very good performing driver. I feel like offering to do this for people in batches of 10 or more, it would be ultra cheap.

Anyway, hope someone finds this useful..

This driver now has only one mode. HIGH.

Before it had the usual 4 modes.