Novatac Gen 1 mod to sw30
was low of 0.1, max of 60 lumens on my meter
.
.
now low of 0.1, max of 235 lumens
used a dremel to grind down a 12mm mcpcb
.
mounted the mcpcb w thermal epoxy and added Kapton tape over the solder joints… after a lot of fiddling, got the LED centered… quite happy.
.
I note the sw30 likes to turn extra pink after a few seconds at max output, so I programmed the ceiling to 140 lumens, to prevent overpinking… LOL