Convoy L21A - only 9 groups?

LED Flashlights – General Info 21700 Flashlights
1

Hello. I have bought Convoy L21A with OSRAM KW CULPM1 emitter and it`s powered by Samsung INR21700-50S 5000mAh

It`s working ok but my problem lies with the selectable mode groups which are supposed to be 12.
Well I got only 9 and they are really strange.
This is my attempt to guess what is behind every one

1: 100% - 35% - 10%
2: 100% - 35% - 10% - strobe
3: 100% - 10%
4: 35% - 100%
5: 100%
6: 100% - 35% - 10%
7: 100% -35% - 10 % - 1%
8: 10% - 35% - 100%
9: 10% - 20% - 35% - 100%

Does anyone have any idea what is going on?

2

Thanks for stopping by, Beldin!

23 Amy Adams
23 Amy Adams2000×1487 333 KB

3

There is an unofficial table of all groups. You might have missed the ones with extra functions like batt check and sos, etc. They have the same brightness levels, only some extra at the end.

4

Are you are talking about this

because as I said i only got what i wrote in my first post and it is nothing like what should be.

I have not missed anything, there are only 9 groups and after the last one with 9 flashes it cycles back to the first group. 10, 11 and 12 are nowhere to be found.
I have bought the flashlight from a local store in my country. I have mailed them with questions but I expect answer probably in monday.

5

Can you take out the battery tube and take photo of the underside of the driver? We might be able to recognize whether is a genuine convoy driver or a knock off. The modes doesn’t seem right. Most of the mode groups in convoy driver start from low and end in high. The reverse mode groups are in the minority.

6

Here it is

and this is the cap

7

That looks like a knock off driver. Convoy driver usually comes in red, green or purple PCB and the logo “convoy.bg” sound dubious. Moreover, any modern convoy driver is not soldered to the head but yours did.