【convoy】

MascaratumB · 2019-06-17T21:24:56.000Z

andr3w:

I will be OK with any set of 4-6 modes of constant light (strobe is not mandatory; moonlight is).
What I’m looking for is versatile power supply (everything of AA form factor can be used: alkaline, NiMH, Li-Ion,…) and size.
Such a one-cell flashlight should be most compact, allowing even holding on keyring for an ideal case.
Two-cell option will be comfortable for self-defence purposes because of diameter/length combination (but need no tail button here).

Apart from the 4-6 modes, there is something like that, the DQG Slim Ti: “REVIEW”: DQG Slim Ti (1/2 AA and other batteries) ***[DISCOUNT CODE ADDED - 05/22/2018]***

Mocarny · 2019-06-17T21:44:36.000Z

RelakS:

The “click an insane amount to go to settings” is way better I think.

+1

I didn’t buy S2+ because of blinking in low mode. No more blinking :weary:
Moonlight-low-med-hi.

Oooor…
5 modes ML-Lo-Lo-Med-Hi with 2-click for back

And ability to turn memory on and off after a bunch of clicks, strobe after…idk

Buuut…
My personal best is 2 mode groups, 4 modes in each and memory on in one, and off in another, group changing after 9-click. E.g. 1–10–40–100 memory on and 0,2–3–15–60 memory off

Simon_Mao · 2019-06-18T03:14:52.000Z

lumenzilla:

Simon Mao:

andr3w:

Hi Simon,
Do you have or plan any flashlight able to use all of AA / NiMH / 14500 li-ion (voltage range 0.8…4.4V)?
Interested in both one and two cell variants.

i will get AA/14500 driver with high efficiency soon ,one or two weeks
What is the most reasonable mode ?

Any chance for 15mm diameter driver?
It’s very rare.

Suggested mode:

- L - M - H

H - M - L

No memory, no strobe (or hidden).

uh,15mm is too small

Simon_Mao · 2019-06-18T03:16:35.000Z

Wieselflinkpro:

Simon Mao:

Wieselflinkpro:

Hello Simon,

do you have any 3V driver with 22mm diameter and for reverse clicky?
Which adapters do you have for 22mm drivers?

ramping driver

4modes

Is the current of these drivers limited per firmware or are this direct drive drivers?
Will I get 10-18Amps with a 3V XHP50.2? Is this possible?

the ramping driver is direct driver
the 4modes has constant current

Simon_Mao · 2019-06-18T03:21:16.000Z

Glennac:

Banggood Order 67173293
6/2/2019

I think you are trying to PM me via Ali Express, but that may be another matter. It’s not connecting to AliExpress right now so will Reply to that later.

Thanks Simon!

uh ,you can PM me about your problem

Terry_Oregon · 2019-06-18T03:36:14.000Z

passive101:

What are the run times for the 4 brightness settings for the S21A?

I posted them HERE.

Barkuti · 2019-06-18T06:24:18.000Z

Simon Mao:

Wieselflinkpro:

…

Is the current of these drivers limited per firmware or are this direct drive drivers?

Will I get 10-18Amps with a 3V XHP50.2? Is this possible?

the ramping driver is direct driver
the 4modes has constant current

The ramping driver is regulated. Comes stock configured at 8A in high, using a 5mΩ (R005) sense resistor (I recently built a C8S with a ∅22mm unit and got 7.63A measured with my power supply for that unit). Being regulated means it uses the MOSFET in linear mode by tuning the gate voltage to limit current to desired values, thus it won't go above 8A unless the sense resistor value is lowered.

Better to say this than having to hear someone complaining at a later date. Wieselflinkpro is probably better served with an unregulated MOSFET driver (with @#$% PWMed mid and low modes) if he wants as much current as it will go.

:-)

Umpi2000 · 2019-06-18T09:04:58.000Z

Does anyone know if the S2+ clip will fit the S21 correctly?

80T · 2019-06-18T09:48:38.000Z

Umpi2000:

Does anyone know if the S2+ clip will fit the S21 correctly?

Most likely not, S21 has a bigger diameter.

andr3w · 2019-06-18T11:06:23.000Z

MascaratumB:

Apart from the 4-6 modes, there is something like that, the DQG Slim Ti: “REVIEW”: DQG Slim Ti (1/2 AA and other batteries) ***[DISCOUNT CODE ADDED - 05/22/2018]***

Thanks for the point, it’s interesting. I also saw Sofirn SP10S, but this brand usually glues all the head as far as I heard, it isn’t nice. Even omitting upgradeable optics/LED point, what I have to do after breaking the glass, for example?

BTW, single model with optional extension tube (1*AA <-> 2*AA) is even better solution than two different flashlight models, I missed to wish that initially

Umpi2000 · 2019-06-18T11:50:41.000Z

80T:

Umpi2000:

Does anyone know if the S2+ clip will fit the S21 correctly?

Most likely not, S21 has a bigger diameter.

I ask because there is a slot on the S21A for one (I think?) and I haven’t seen a specific S21A clip on Simon’s Ali shop listings.

Phlogiston · 2019-06-18T23:12:13.000Z

andr3w:

BTW, single model with optional extension tube (1*AA <-> 2*AA) is even better solution than two different flashlight models, I missed to wish that initially

I like 2×AA lights, I’m waiting for a Jaxman M2 at the moment, but I’d be interested in a Convoy S2+ style 2×AA tube light as well

I like long 3×AA lights too, I’d buy several 3×AA tubes for my Convoy S2+ lights and just use the Li-Ion driver :smiling_imp:

Simon_Mao · 2019-06-19T06:59:32.000Z

Umpi2000:

Does anyone know if the S2+ clip will fit the S21 correctly?

not suitable

Chatika_vas_Paus · 2019-06-19T08:08:01.000Z

Simon Mao:

i have a problem with Crescendo UI , there is no memory function ,
is it because of attiny 13?

Same as in biscotti firmware. Only here is the first option.

Config mode
——————

To enter config mode, quickly tap a bunch of times until the light stops lighting up. It should be 16+ times. Then it’ll scroll through the options:

1. Memory toggle. Tap during the “buzz” to turn memory on or off.
2. Thermal calibration. Tap during the “buzz” to enter thermal
calibration mode.

Light turns on at a low level: Tap now to set default temperature
limit. Otherwise, wait.
Light goes to full brightness: Tap at any time to set temperature
limit to the current temperature. Basically, wait until it feels
hot, then tap.

So, to set a temperature limit:

- Tap 16+ times.

- Wait for the light to blink twice.

- Tap during the “buzz”.

Wait until the light feels hot, then click to turn it off.

Agro · 2019-06-19T08:18:19.000Z

I came here to take a look at the titanium AAA Convoy sample but I don’t see it…

oweban · 2019-06-19T08:21:17.000Z

Agro:

I came here to take a look at the titanium AAA Convoy sample but I don’t see it…

Check the first post

Chatika_vas_Paus · 2019-06-19T08:21:43.000Z

Pics are in OP

Agro · 2019-06-19T08:24:06.000Z

Thank you!

I see a twisty keychain…nice.
I don’t like the patina-style anodization but nevertheless I’m very interested.

KevinZA1988 · 2019-06-19T08:33:07.000Z

That 3x SST-20 light looks great!

Will optics fit in that light? I’m curious to see the beam pattern with that reflector.
Does it use a 20mm triple MCPCB? I guess the driver is 22mm and the battery is 21700 (not 21.7 700 lol)
Reverse clicky switch, right?

Simon_Mao · 2019-06-19T08:40:02.000Z

KevinZA1988:

That 3x SST-20 light looks great!

Will optics fit in that light? I’m curious to see the beam pattern with that reflector.
Does it use a 20mm triple MCPCB? I guess the driver is 22mm and the battery is 21700 (not 21.7 700 lol)
Reverse clicky switch, right?

25mm PCB ,
carclo len doesnt fit .
i have design another host and PCB board for carclo lens ,

driver 22mm,it’s 7135*14 (5320mA) inside.
21.5mm inner diameter ,so some batteries are not suitable ,
i will add links of LG and Tesla 21700 (4800-5000mAH) in my store tomorrow

and it’s reverse switch