【convoy】

d_t_a · 2019-08-20T09:21:47.000Z

Simon Mao:

Yokiamy:

Simon Mao:

Yokiamy:

Yokiamy:

Simon, is there an easy method to change or disable the temperature regulation of the L21a SST40 driver (i have the version with 4 modes only) ?

Maybe by disassembling the temperature controller, or soldering a bypass resistor, or just bypassing it with a wire?

Simon, any ideas about this ?

i didnt get reply from manufacturer,yet.
i will reply you later

Thank you, looking forward to it !

Sorry I don’t fully understand the picture. The circled spot is I suppose the thermal sensor controller, but what should we do to disable it if we don’t want the temperature control on the SST40 4-mode driver? The circled part has to be unsoldered? Pardon my ignorance…

d_t_a · 2019-08-20T09:24:47.000Z

[quote=Nicolicous]

Simon Mao:

hodor:

Any update on this beauty yet?

available soon,about in 10 days

:partying_face:

This is a triple SST40 right? (I saw some mention of triple SST20…) Any approximate lumens numbers for this Convoy S12?

Agro · 2019-08-20T09:28:44.000Z

Simon…any news about the titanium AAA lights?

oweban · 2019-08-20T09:30:59.000Z

Triple SST20, IIRC.

Yokiamy · 2019-08-20T09:56:58.000Z

Simon Mao:

2019/8/20
new headband for H1 is available now

That is one good looking headband Simon!

Yokiamy · 2019-08-20T10:06:20.000Z

d_t_a:

Sorry I don’t fully understand the picture. The circled spot is I suppose the thermal sensor controller, but what should we do to disable it if we don’t want the temperature control on the SST40 4-mode driver? The circled part has to be unsoldered? Pardon my ignorance…

Yes.
Have a look over HERE how i did it

Mocarny · 2019-08-20T14:02:16.000Z

Mocarny:

Simon Mao:

adam7027:

Hello Simon,

Does the XHP35 HI 4000K B4-40E have 90 CRI?

not high CRI

Uch why can’t I find it? It is so annoying…

Can someone help with finding this LED? :person_facepalming:

jasontheguitarist · 2019-08-20T14:43:15.000Z

Do some LED bins only exist on paper? Seems that way.

KevinZA1988 · 2019-08-20T15:09:04.000Z

I also tried finding that LED the day he launched it… Nothing!

gchart · 2019-08-20T15:43:29.000Z

Yes, I think some only exist in spec sheets. Kind of like “if we were to produce some, this would be the item number for it”.

For endeavors such as this, Octopart is a great resource… just search for the Cree order code. Pretty much anything I’ve found has a 1000pc MOQ though. AVNET supposedly has it in stock (with the 1000pc MOQ). Other places such as Mouser and Digikey also list it, “non-stocked” with 1000pc MOQ meaning that you should be able to place an order (for 1000pcs) and they’d procure it for you.

Now if you don’t mind going for the ANSI versions instead of the EasyWhite versions, you can get the XHP35-HI 4000K 90-CRI in B4 flux bin (XHP35A-H0-0000-0D0UB40E5) from Mouser in 1pc increments for USD $6.50

Mocarny · 2019-08-20T15:44:31.000Z

Maybe it is just SuperSecretSimon-CustomMade LED. SSS-CM LED

RelakS · 2019-08-20T19:57:18.000Z

I was able to get 2 minutes runtime from the M3 on turbo … on a bicycle, while I was in motion.
I had to switch it off, because someone appeared in the road, and I did not want to blind him/her

Actually, id I don’t want to see very much ahead, but just avoid from overhead trees, etc, the High mode is just enough. I even put a lens in front of it to have a wider beam, which of course make the hotspot less bright.

matik42 · 2019-08-21T05:52:30.000Z

jasontheguitarist:

Do some LED bins only exist on paper? Seems that way.

On Simon ali store stated that “CREE XHP35 HI LED 4000K B4-40E” and 9998 available for bare

Are anybody have done measurment?

Simon_Mao · 2019-08-21T09:38:05.000Z

oweban:

Looks good!

I saw a report on reddit that the current H1 batch has the new UI (similar to Thrunite), is that right?

some are updated

Simon_Mao · 2019-08-21T09:40:28.000Z

d_t_a:

Simon Mao:

Yokiamy:

Simon Mao:

Yokiamy:

Yokiamy:

Simon, is there an easy method to change or disable the temperature regulation of the L21a SST40 driver (i have the version with 4 modes only) ?

Maybe by disassembling the temperature controller, or soldering a bypass resistor, or just bypassing it with a wire?

Simon, any ideas about this ?

i didnt get reply from manufacturer,yet.
i will reply you later

Thank you, looking forward to it !

Sorry I don’t fully understand the picture. The circled spot is I suppose the thermal sensor controller, but what should we do to disable it if we don’t want the temperature control on the SST40 4-mode driver? The circled part has to be unsoldered? Pardon my ignorance…

remove it

Simon_Mao · 2019-08-21T09:41:59.000Z

[quote=d_t_a]

Nicolicous:

Simon Mao:

hodor:

Any update on this beauty yet?

available soon,about in 10 days

:partying_face:

This is a triple SST40 right? (I saw some mention of triple SST20…) Any approximate lumens numbers for this Convoy S12?

3 * LED in parallel
driver 22mm output 6A with tempareture management

Simon_Mao · 2019-08-21T09:43:45.000Z

Agro:

Simon…any news about the titanium AAA lights?

seems not welcome,
i’m ready to design titanium AA flashlight with better driver

Simon_Mao · 2019-08-21T09:44:48.000Z

oweban:

Triple SST20, IIRC.

not only sst20
any 3535 LED can be installed

KevinZA1988 · 2019-08-21T09:47:53.000Z

Simon Mao:

oweban:

Triple SST20, IIRC.

not only sst20
any 3535 LED can be installed

Simon, what’s the size of the MCPCB? Can similar sized MCPCB’s be found elsewhere??

Simon_Mao · 2019-08-21T09:49:03.000Z

matik42:

jasontheguitarist:

Do some LED bins only exist on paper? Seems that way.

On Simon ali store stated that “CREE XHP35 HI LED 4000K B4-40E” and 9998 available for bare

Are anybody have done measurment?

uh,it’s just virtural number :person_facepalming: