Cree CXB3590 in the Giga Thrower!!!!

Bribo · 2018-09-21T16:37:05.000Z

Nice work VOB, I haven’t even got the parts in yet to mod mine to level of your previous video !

wolfdog1226 · 2018-09-21T16:40:30.000Z

Great job Matt…always entertaining and educational!

maildroid · 2018-09-21T17:45:43.000Z

Omg thats so awesome. You make it look so easy . How is the heat ? And battery life?

pooptoast · 2018-09-21T18:33:25.000Z

This is pretty awesome. This build make it look like it belongs in there. Good work!

SKV89 · 2018-09-21T19:12:17.000Z

Simply amazing! :+1:

gchart · 2018-09-21T20:01:15.000Z

Very impressive, Matt! Well done, it looks like it was made to be that way. That’s some serious lumens… hows the heat?

M4D_M4X · 2018-09-21T20:10:23.000Z

great mod and video VOB

love your work!

LichtAn · 2018-09-21T21:00:07.000Z

Your videos are just the best. I’m always super hyped when a new Adventure Sport Flashlights video comes up. :+1:

blueb8llz · 2018-09-21T21:33:48.000Z

Amazing job well done. It looks more than 160kcd. Or maybe it’s just me wishful thinking.
Why couldn’t it been like 500kcd with 16k lumens!! That would make one beast of a light.
I wish you showed your 70.2 version for comparison. I think I liked that one a tiny bit more. 9k Lumens and 1 million lux

Agro · 2018-09-21T22:43:57.000Z

Have you considered DC-Fix to remove the donut?

teacher · 2018-09-21T23:48:00.000Z

Very nicely done VoB!! Pretty amazing in fact……

CNCman · 2018-09-22T00:33:56.000Z

“vestureofblood” Very nice mod to your GT. And very good video of the process you experienced completing it successfully. I was curious how the throw was, and if it were possible to get it focused for throw. I have wondered why nobody has tried this type of COB led in a big flashlight.
Great job. How did you find that Driver ?? And where did you get it , Please :sunglasses:

HONDARIDER · 2018-09-22T05:44:22.000Z

If one could radius the corners some, that led would be awesome in a maglight. Talk about a sleeper/mule. Heat sinking may be difficult even if you could get it to fit. Maybe this is just a bad idea. :person_facepalming:

atbglenn · 2018-09-22T09:46:09.000Z

Totally professional mod you did! You should sell them!

The_Driver1 · 2018-09-22T13:32:03.000Z

Very, cool mod VOB! :+1:

One thing though - that Cree COB LED is by far not the brightest COb LED on the market. COB LEDs really are not their specialty. Here you can find a comparison of the brightest COB LEDs on the market (in German). Citizen, the company that invented this type of LED, offers the most powerful model (rated up to 524W).

KawiBoy1428 · 2018-09-22T13:32:28.000Z

Nicely done Matt, extremely cool idea! :+1: Love your videos too.

How hot is that TaskLED voltage boost driver getting being piggy backed with out heatsinking? Is it an issue?

Lumencraft-Matt · 2018-09-22T14:46:05.000Z

Jtm94:

That thing is crazy man. I gotta say the way the knob for the potentiometer came out looks great.

I really love that too, I’ve not had a pot control in years.

maildroid:

Omg thats so awesome. You make it look so easy . How is the heat ? And battery life?

Not done the heat testing yet, but I’m guessing abut 10 minutes max on high. Battery life estimate would be LED 37.5v x 3.2a= 120w Battery 29.6v x 3.1a = 91.76w 91.76/120= .76 hours run time on max.

Agro:

Have you considered DC-Fix to remove the donut?

I do have some, and it would probly work, but the loss of light and not being able to see my golden monster inside kept me from it

CNCman:

“vestureofblood” Very nice mod to your GT. And very good video of the process you experienced completing it successfully. I was curious how the throw was, and if it were possible to get it focused for throw. I have wondered why nobody has tried this type of COB led in a big flashlight.
Great job. How did you find that Driver ?? And where did you get it , Please :sunglasses:

Here is the driver. Hyperboost Driver

Taskled is really only something people know about if they are from the super old school flashlight club :face_with_monocle: If you get one make sure you press the thermal tape on to the bottom of the driver first and very well, then stick it to the heat sink, thermal path is critical. Also read the documentation as best you can, these drivers are very powerful, but also delicate.

The_Driver:

Very, cool mod VOB! :+1:

One thing though - that Cree COB LED is by far not the brightest COb LED on the market. COB LEDs really are not their specialty. Here you can find a comparison of the brightest COB LEDs on the market (in German). Citizen, the company that invented this type of LED, offers the most powerful model (rated up to 524W).

Thank you for sharing. I was not aware of that. I may give one of those a shot too. Honestly I am kinda glad I didn’t know. Posting here at BLF all that I need do for a title is write the simple truth. CXB3590 and everyone comes running because they understand. On youtube generic terms like “worlds brightest” or “worlds best” seem to play better. Now to figure out a driver solution for a 110V led :student:

KawiBoy1428:

Nicely done Matt, extremely cool idea! :+1: Love your videos too.

How hot is that TaskLED voltage boost driver getting being piggy backed with out heatsinking? Is it an issue?

There is thermal tape from it’s pcb to the factory board and this seems to be enough in my case because the driver is doing very little work. The voltage from the pack is so close to LED vf that on the lower end the driver is not even active (it goes direct drive). With a fully charged pack my low is like 400 lumens. Once the over voltage wears off I think it’s more like 120 ish.

eas · 2018-09-22T22:39:05.000Z

If it’s worth killin’, it’s worth over-killin’! Nice!

One question, you did this instead of finishing that wall, right?

DBSAR · 2018-09-22T22:55:23.000Z

awesome video & mod!

Newlumen · 2018-09-22T23:08:02.000Z

This thing will be perfect if we can get 21700 to work… 8 x 21700.