CRX Stuff for Sale

Lund1660 · 2019-12-12T04:40:38.000Z

Is the CRX CuSS AAA LH351D 5000K 80CRI - Rv Clicky Tail Sw - 100lm. - £30 ($40) still available? I will take it.

Marc_E · 2019-12-15T16:07:10.000Z

I’d like the DQG brass charger please

ch1ir · 2020-03-05T18:19:56.000Z

Beautiful lights

LEDicrous · 2020-03-06T01:23:46.000Z

Sorry for the silly question. I thought LED with high CRI is a great feature. Are those blue/green gaskets designed to do the opposite of high CRI by adding blue/green tint?

CRX · 2020-03-06T01:33:16.000Z

The light out the front doesn’t shine through the gasket so effect on tint is minimal if any I believe.
But say you have the light on full power then change to ML, you’ll have more tinted colour output than white light for a while.

LEDicrous · 2020-03-06T02:46:23.000Z

Does ML mean Medium Light? Is the purpose of those color glow gaskets purely decorative?

CRX · 2020-03-06T02:57:27.000Z

MoonLight mode. Yeah just to give an afterglow.
You can buy LED versions from Lexel for a more consistent glow but they require wiring.
Red 1mA.

Minus green filters can be installed between the glass & optic for altering the tint some. It’s a thin plastic film.

jon_slider · 2020-03-06T17:10:35.000Z

LEDicrous:

Are those blue/green gaskets designed to do the opposite of high CRI by adding blue/green tint?

imo no

the glow from the gasket, when the light is off, makes it easy to find the light on my nightstand.

the glow has very little actual illumination distance… I do not feel it changes the CRI of the LED

I especially love my acqua blue color gaskets from CRX! Highly entertaining

I can see the dim glow on my nightstand, in full darkness, even without precharging the glow gasket. Ambient daylight is sufficient to charge the gasket enough to be visible by the bed, in the dark.

LEDicrous · 2020-03-06T17:21:18.000Z

jon_slider:

LEDicrous:

Are those blue/green gaskets designed to do the opposite of high CRI by adding blue/green tint?

imo no

the glow from the gasket, when the light is off, makes it easy to find the light on my nightstand.

the glow has very little actual illumination distance… I do not feel it changes the CRI of the LED

Thanks gentlemen, I didn’t know about glow gasket and misunderstood its purpose. I though it was a kind of filter to alter the light tint

Is the glow permanent? does the glow gasket get power from the battery? Is this a similar design than some tail click button that has a led that glows weakly when the light is turned off? Sorry I saw a post somewhere for this design but don’t remember which flashlight model.

BurningPlayd0h · 2020-03-06T17:25:14.000Z

LEDicrous:

jon_slider:

LEDicrous:

Are those blue/green gaskets designed to do the opposite of high CRI by adding blue/green tint?

imo no

the glow from the gasket, when the light is off, makes it easy to find the light on my nightstand.

the glow has very little actual illumination distance… I do not feel it changes the CRI of the LED

Thanks gentlemen, I didn’t know about glow gasket and misunderstood its purpose. I though it was a kind of filter to alter the light tint

Is the glow permanent? does the glow gasket get power from the battery? Is this a similar design than some tail click button that has a led that glows weakly when the light is turned off? Sorry I saw a post somewhere for this design but don’t remember which flashlight model.

Nope, its just molded polymer that had glow-in-the-dark powder mixed in. Like watch lume or little GITD toys.

There are powered “aux LEDs” that can be a single or many different colors depending on their design. The newer Emisar and Fireflies lights have these, and Lexel (maybe others too) here sells boards so you can add them to other lights like the FW3A.

CRX · 2020-03-06T17:26:41.000Z

More info about glow gaskets:

DIY Glow Gaskets for Triples and Other Glow Stuff Featured Mods

A wee tutorial on how to make your own glow gaskets for multi emitter lights BLF style.[image] Making glow gaskets using magnets, glow powder & UV glue: First I made a template from an old 20mm triple MCPCB to match up with a Carclo 105xx optic. 65mm steel box lid. This is the most difficult & time consuming part but only needs done once.[image] A piece of sticky tape placed on the steel surface sticky side up. (Clear tape is best to allow UV hardening of both sides) 6mm x 2mm and 3mm x 2mm…

Lexel LED aux boards:

[SALE] FW3A lighted TIR board multicolored with LVP, stabilized or High/low Flashlight Modding and DIY Parts

how it began can be read here Boards can be build as Gen 1 to 1.7 now Generation 1 High/low capability but then LEDs dim to about 50% between full and empty battery Generation 1.2 LEDs are voltage stabilized High/low does not work, no LVP Generation 1.5 unregulated LED voltage + LVP Generation 1.7 stabilized with LDO + LVP [image] - version with LDO → High/low not possible version with LVP → High/low not possible → flash #define INDICATOR_LED_SKIP_LOW setting as well LDO → constant b…

jon_slider · 2020-03-06T17:40:38.000Z

LEDicrous:

Is the glow permanent?

yes,
but not constant brightness

the glow is charged by turning on the flashlight, but the glow is not battery powered

the highest brightness immediately after charging fades quickly (less than 1 minute)
but the residual dim glow remains sufficient to locate the light in the dark.

Even if I do not use the flashlight to charge the glow before bedtime, ambient light during the day, (iow leaving the light sitting on the nightstand 24/7) is enough to make the glow retain sufficient brightness to locate the light in the dark.

GodIsLight · 2020-04-08T03:05:37.000Z

Just got my aqua gasket and tail cap from CRX. Fast delivery even amidst covid issue! Great quality. Great care and detail in packaging. Love it. Highly recommend CRX! Thanks CRX!

dk21291 · 2020-05-26T02:15:35.000Z

Interested in the clicky 10180 light! Can you PM me info about shipping to the U.S.??

Marc_E · 2020-05-27T02:07:39.000Z

Yes please on the Tec Accessories TEC-S323.

Darksky · 2020-06-19T00:24:08.000Z

Is there a list of what is still available?

hodor · 2020-06-19T13:43:52.000Z

My guess is the first post gets updated as and when lights come and go.

Agro · 2020-06-19T13:53:04.000Z

Yes, that’s the case.

ch1ir · 2020-06-19T16:29:41.000Z

Wait these are available?

Agro · 2020-06-19T18:09:14.000Z

Yes