Custom Button tops. Very good to Unacceptable.NEED EXPERIENCED SOLDER BLOB EXPERT OPINIONS.

raccoon · 2023-02-02T22:11:47.000Z

I got that email as well.

The cells that are supposed to be $7.75 came up $8.00 for me.

Either way, I think the MOLICEL/NPE INR-21700-P42A 45A 4200MAH are more bang for the buck, plus I don't need any batteries at the moment.

gravelmonkey · 2023-02-03T09:08:19.000Z

Is the dark blue cell just re-wrapped? Or different brand/batch/model?

It looks like you’re mixing cells in that carrier, which is generally not recommended… Of course free to do what you want but just wanted to clarify in case people with less experience thought it was normal.

Hope the trail and x648 was good - I can’t find info on that light, who makes it?

Cochise334ever · 2023-02-03T09:21:00.000Z

gravelmonkey:

Is the dark blue cell just re-wrapped? Or different brand/batch/model?

It looks like you’re mixing cells in that carrier, which is generally not recommended… Of course free to do what you want but just wanted to clarify in case people with less experience thought it was normal.

Hope the trail and x648 was good - I can’t find info on that light, who makes it?

Please give me some credit and read the 8th sentence in the op. The answer is in there.

Do you think I would have Kennybobby repair my four 25S feeble button tops and replace one of them with some unknown and different cell? All the photos, before and after repair have that blue rewrap in there.

I would never mix cells.

I was joking with chops. I made that light up.

gravelmonkey · 2023-02-03T22:06:13.000Z

Cochise334ever:

gravelmonkey:

Is the dark blue cell just re-wrapped? Or different brand/batch/model?

It looks like you’re mixing cells in that carrier, which is generally not recommended… Of course free to do what you want but just wanted to clarify in case people with less experience thought it was normal.

Hope the trail and x648 was good - I can’t find info on that light, who makes it?

Please give me some credit and read the 8th sentence in the op. The answer is in there.

Do you think I would have Kennybobby repair my four 25S feeble button tops and replace one of them with some unknown and different cell? All the photos, before and after repair have that blue rewrap in there.

I would never mix cells.

I was joking with chops. I made that light up.

Sounds good, paired/grouped cells always the way to go.

JenkinsMatti · 2023-02-04T05:54:05.000Z

Cochise334ever:

gravelmonkey:

Is the dark blue cell just re-wrapped? Or different brand/batch/model?

It looks like you’re mixing cells in that carrier, which is generally not recommended… Of course free to do what you want but just wanted to clarify in case people with less experience thought it was normal.

Hope the trail and x648 was good - I can’t find info on that light, who makes it?

Please give me some credit and read the 8th sentence in the op. The answer is in there.

Do you think I would have Kennybobby repair my four 25S feeble button tops and replace one of them with some unknown and different cell? All the photos, before and after repair have that blue rewrap in there.

I would never mix cells.

I was joking with chops. I made that light up.

Actually, in the interest of accuracy; the answer is not in the “8th sentence”.

It is in the 13th sentence. It is the 8th paragraph as written & punctuated.

gravelmonkey · 2023-02-04T06:58:38.000Z

JenkinsMatti:

Cochise334ever:

gravelmonkey:

Is the dark blue cell just re-wrapped? Or different brand/batch/model?

It looks like you’re mixing cells in that carrier, which is generally not recommended… Of course free to do what you want but just wanted to clarify in case people with less experience thought it was normal.

Hope the trail and x648 was good - I can’t find info on that light, who makes it?

Please give me some credit and read the 8th sentence in the op. The answer is in there.

Do you think I would have Kennybobby repair my four 25S feeble button tops and replace one of them with some unknown and different cell? All the photos, before and after repair have that blue rewrap in there.

I would never mix cells.

I was joking with chops. I made that light up.

Actually, in the interest of accuracy; the answer is not in the “8th sentence”.

It is in the 13th sentence. It is the 8th paragraph as written & punctuated.

I forget the source, but there’s a comedy sketch somewhere where, in the classic nasal nerd voice:

“Now it’s not strictly true that nobody likes a pedant” …

JenkinsMatti · 2023-02-04T07:32:18.000Z

Kona_G · 2023-02-04T18:07:04.000Z

Can anyone who owns KP NH1832 verify overall length is indeed 66.80mm and this is (not 65.80 or less) a typo?

I need extra 1mm length, not wanting to add spots or solder

kennybobby · 2023-02-04T18:21:56.000Z

do you need flat top or a button to make contact?

Cochise334ever · 2023-02-04T18:34:20.000Z

JenkinsMatti:

Cochise334ever:

gravelmonkey:

Is the dark blue cell just re-wrapped? Or different brand/batch/model?

It looks like you’re mixing cells in that carrier, which is generally not recommended… Of course free to do what you want but just wanted to clarify in case people with less experience thought it was normal.

Hope the trail and x648 was good - I can’t find info on that light, who makes it?

Please give me some credit and read the 8th sentence in the op. The answer is in there.

Do you think I would have Kennybobby repair my four 25S feeble button tops and replace one of them with some unknown and different cell? All the photos, before and after repair have that blue rewrap in there.

I would never mix cells.

I was joking with chops. I made that light up.

Actually, in the interest of accuracy; the answer is not in the “8th sentence”.

It is in the 13th sentence. It is the 8th paragraph as written & punctuated.

You must be bored and are certainly critical.

Whether it’s a sentence or a paragraph is irrelevant. My point is obvious.

If You’re going to participate in a thread try adding something beneficial,useful and stick to the subject matter.

Kona_G · 2023-02-05T02:00:35.000Z

@kennybobby, flat top would be optimal. I viewed Samsung INR 30Q button top cells. The specs are less length than the KP… That’s why I thought KP specs could be typo.

kennybobby · 2023-02-05T03:40:58.000Z

Probably a typo, would expect 65.0mm for a flat top.

i measured a 4 pack of button tops that are 66.5mm.

JenkinsMatti · 2023-02-05T16:46:51.000Z

Cochise334ever:

JenkinsMatti:

Cochise334ever:

gravelmonkey:

Is the dark blue cell just re-wrapped? Or different brand/batch/model?

It looks like you’re mixing cells in that carrier, which is generally not recommended… Of course free to do what you want but just wanted to clarify in case people with less experience thought it was normal.

Hope the trail and x648 was good - I can’t find info on that light, who makes it?

Please give me some credit and read the 8th sentence in the op. The answer is in there.

Do you think I would have Kennybobby repair my four 25S feeble button tops and replace one of them with some unknown and different cell? All the photos, before and after repair have that blue rewrap in there.

I would never mix cells.

I was joking with chops. I made that light up.

Actually, in the interest of accuracy; the answer is not in the “8th sentence”.

It is in the 13th sentence. It is the 8th paragraph as written & punctuated.

You must be bored and are certainly critical.

Whether it’s a sentence or a paragraph is irrelevant. My point is obvious.

If You’re going to participate in a thread try adding something beneficial,useful and stick to the subject matter.

Bored??? Certainly not!! How could one be bored reading about all the nuances of solder b(. )( .)bs.

Critical??? Not in the least sir. No criticism was uttered at all.

Yes, “your point” was 100% obvious indeed… I agree. Nothing was said disputing that fact.

The only thing that was mentioned was your directions to where you point was stated in the OP were incorrect.

I pointed this out, nothing more. If we want people to read threads before they comment (which I totally agree with btw) the things we post should be accurate.

Would you not agree???
…
GO Chiefs!!!

Cochise334ever · 2023-02-05T18:18:29.000Z

^

No I don’t agree.

You’ve contributed NOTHING to this thread except something irrelevant. Don’t try to justify it by saying things should be accurate.

I was a psychologist for 40 years. A part of my job was to look through BS and understand all the defense mechanisms that are associated with it. Justification, rationalization, manipulation etc etc

You are an easy case.

Please go elsewhere because you have not contributed to the topic as I mentioned earlier and you’re certainly not going to fool me.

Have a good day.

gravelmonkey · 2023-02-05T18:50:00.000Z

Cochise334ever:

^

No I don’t agree.

You’ve contributed NOTHING to this thread except something irrelevant. Don’t try to justify it by saying things should be accurate.

Give me a break. Everything you posted on here you’re joking around about stuff.

Drop it, let’s get back on topic.

Is there a better alternative solder than 70/30 for blobbing cells?

Cochise334ever · 2023-02-05T18:56:01.000Z

gravelmonkey:

Cochise334ever:

^

No I don’t agree.

You’ve contributed NOTHING to this thread except something irrelevant. Don’t try to justify it by saying things should be accurate.

Give me a break. Everything you posted on here you’re joking around about stuff.

Drop it, let’s get back on topic.

Is there a better alternative solder than 70/30 for blobbing cells?

If you’re going to but in and say that you should have quoted both of us not just me.

Cochise334ever · 2023-02-05T18:56:47.000Z

This Thread is dead. The batteries have been fixed. There’s nothing left for me to say.

chops728 · 2023-02-05T19:20:37.000Z

You couldn’t point him in the right direction anyway

Gravelmonkey — A 60/40 lead solder works best —- adding a small brass button or washer works well to

Cochise334ever · 2023-02-13T13:42:43.310Z

Testing…Have no interest in continuing the thread, seeing if the thread is CLOSED like someone mentioned.

Screenshot_20230113-042603_Photos1080×2400 145 KB

Screenshot_20220518-045417_Photos1080×2400 369 KB

Obviously it is not. Good day.

chops728 · 2023-05-28T16:25:43.011Z

Finally got around to adding Button Tops to some cells – I removed some from a couple dead cells to try it out – The used tabs were slightly warped but usable — The difference is— The dead cells had one ok weld and one not so good (that’s why I was able to reuse them ) The ones I welded on are not coming off in one piece