Dang, my Sanrenmu 7010 (710) frame lock broke

varbos · 2019-07-13T22:59:40.000Z

Eleziel:

Have you got a picture of the lock side scale disassembled?

ALL THINGS BUDGET KNIVES EDC Gear for Flashlight Carriers

Here is arrangement of SRM Land 8103 [image] [image] On each side of blade there is a bronze washer (drilled with holes) and a plastic (nylon/teflon?) washer. I think this is a design mistake and cause of the stiff action. When the pivot screw is tightened the holes in the bronze washer ‘bite’ into the softer washer. Causes some extra friction. When CRK uses drilled bronze washers he doesn’t combine them with teflon/nylon. They just uses phosphor bronze on it’s own. (to my knowledge) The s…

and did you try backing the pivot off until you got minor bladeplay?

As stated already, issue was not merely caused by pivot tightness. Of course I backed off the pivot, this was one of first areas of investigation. It was also 100% not related to polishing washers or washers vs bearings. The issue was initial opening difficulty. The knife felt like it was glued shut … once the detent finally gave way (after big effort and sore thumb!) the action was reasonably smooth.

Trust me, everything obvious you can think was already covered 1+ year ago. For me it is an old issue and not particularly interesting any more so I don’t intend to repeat myself. You have fair warning, feel free to buy it and see if it is fixed.

teacher · 2019-07-13T23:04:34.000Z

@ Eleziel

True… but it is a very simple fix, as Adahn pointed out.

Anybody know where I can find an 810 with a Sandvik blade?? I am drawning a blank so far.

Eleziel · 2019-07-14T03:01:03.000Z

teacher:

@ Eleziel

True… but it is a very simple fix, as Adahn pointed out.

Anybody know where I can find an 810 with a Sandvik blade?? I am drawning a blank so far.

German site https://messerundco.de/Sanrenmu-Land-810-12c27-Sandvik-Stahl-silber-stonewashed

edit; damn you, i saw the Real Steel 3001 for 20 off there, i like stubby knives, my wallet does not

Paradise · 2019-07-14T10:07:38.000Z

wow never seen a srm like this. but the part where the lock broke is the thinnest area of the entire knife.

teacher · 2019-07-14T10:29:49.000Z

Eleziel:

teacher:

@ Eleziel

True… but it is a very simple fix, as Adahn pointed out.

Anybody know where I can find an 810 with a Sandvik blade?? I am drawning a blank so far.

German site https://messerundco.de/Sanrenmu-Land-810-12c27-Sandvik-Stahl-silber-stonewashed

edit; damn you, i saw the Real Steel 3001 for 20 off there, i like stubby knives, my wallet does not

Thanks for the link…. They do have them.

I just can’t read 99% of it or figure out if their website has a’ translator’ where I can change it to English to see if they ship to the USA.

Flying_Luminosity · 2019-07-14T10:51:42.000Z

teacher:

Eleziel:

teacher:

@ Eleziel

True… but it is a very simple fix, as Adahn pointed out.

Anybody know where I can find an 810 with a Sandvik blade?? I am drawning a blank so far.

German site https://messerundco.de/Sanrenmu-Land-810-12c27-Sandvik-Stahl-silber-stonewashed

edit; damn you, i saw the Real Steel 3001 for 20 off there, i like stubby knives, my wallet does not

Thanks for the link…. They do have them.

I just can’t read 99% of it or figure out if their website has a’ translator’ where I can change it to English to see if they ship to the USA.

Here’s the Google-translated site.

In the future, just enter the URL into Google Translate, then click on the link on the right hand side.

teacher · 2019-07-14T11:05:09.000Z

@ Flying Luminosity …. Thank you for that link & info… I had no idea.

Siftah · 2019-07-14T14:47:47.000Z

It’s a real shame the only 7010’s that are still available have annoying designs on them, flowers or fireballs, yuck!

Adahn · 2019-07-14T19:52:33.000Z

Siftah:

It’s a real shame the only 7010’s that are still available have annoying designs on them, flowers or fireballs, yuck!

That fireball has a Jaguar (or Panther or w/e) in it!
That’s cool, isn’t it?

But maybe you’d like the SRM 7129 more?

Siftah · 2019-07-15T21:31:55.000Z

Adahn:

That fireball has a Jaguar (or Panther or w/e) in it!
That’s cool, isn’t it?

But maybe you’d like the SRM 7129 more?

That’s a perfectly nice knife, ruined by the dragon

And as a side note, never trust a knife reviewer with a plaster on his finger

Macka17 · 2019-07-15T23:48:13.000Z

Go the 910 it’s on sale there.

Personally I’d go the Ganzo latest D2 models.
Better steel.
Thoigh I don’t like the straight sided knife handles to work with.
Loose grip. Wet or greasy.
TOO easy for hand to slide down onto cutting edge in my eyes.
I never but any knife without a guard or tang built in to handle…

Adahn · 2019-07-16T08:33:56.000Z

Siftah:

Adahn:

That fireball has a Jaguar (or Panther or w/e) in it!
That’s cool, isn’t it?

But maybe you’d like the SRM 7129 more?

That’s a perfectly nice knife, ruined by the dragon

And as a side note, never trust a knife reviewer with a plaster on his finger

Well, if he’s a knifemaker or modder or knife sharpener than I wouldn’t mind that, working with sharp objects usually brings to light some juice of life.

But I agree, the dragon is somewhat cheesy even though I wouldn’t mind if this knife was available in a bigger version.
(Well there is, the Ruike P801 which is a flipper and costs too much for what we’re used to pay for a Sanrenmu made knife.)

I’d like to see the scale before SRM’s hand sanding (the lines where not straight), just stamped in the dragon might look better.

polished and stonewashed

I didn’t really like the dragon so I used the scrap wheel cover from a wheelchair on job and made a new front scale.

I should really invest more time into better pictures…

Eleziel · 2019-07-16T20:44:30.000Z

Adahn:

Siftah:

Adahn:

That fireball has a Jaguar (or Panther or w/e) in it!
That’s cool, isn’t it?

But maybe you’d like the SRM 7129 more?

That’s a perfectly nice knife, ruined by the dragon

And as a side note, never trust a knife reviewer with a plaster on his finger

Well, if he’s a knifemaker or modder or knife sharpener than I wouldn’t mind that, working with sharp objects usually brings to light some juice of life.

But I agree, the dragon is somewhat cheesy even though I wouldn’t mind if this knife was available in a bigger version.
(Well there is, the Ruike P801 which is a flipper and costs too much for what we’re used to pay for a Sanrenmu made knife.)

I’d like to see the scale before SRM’s hand sanding (the lines where not straight), just stamped in the dragon might look better.

polished and stonewashed

I didn’t really like the dragon so I used the scrap wheel cover from a wheelchair on job and made a new front scale.

I should really invest more time into better pictures…

Damn, that looks great,

Adahn · 2019-07-17T05:23:04.000Z

Thank you

Mark_M · 2019-07-22T19:11:34.000Z

I am not really a knife guy, but after reading this thread I bought two models. The 7010 and the 1161. I can not wait to try them out, though mainly I will cut cardboard with them so I will be sure to sharpen them often.

cayman · 2019-07-22T19:15:06.000Z

Have a few 710 and 7010s. They held up so far, but I am not really using them very often.
The silver one with the nail file is a model I never had though.

Mark_M · 2019-07-22T19:25:01.000Z

Nail file or grip?

cayman · 2019-07-22T20:00:00.000Z

This one, has a nail file on the scales:

Mark_M · 2019-07-22T20:02:12.000Z

That isn’t just for grip?

cayman · 2019-07-22T20:05:18.000Z

It is widely described and sold as a “nail file pattern” on the handle:

https://www.fasttech.com/product/3405702-authentic-sanrenmu-7010lui-sh-stainless-steel

I don’t think anybody would use it for that… but that is what it is

This is what I love about Asian product design/engineering and manufacturing… they come up with ideas that really stand out.