Drop.com $20 off - Lumintop Copper/Brass Tool for $10 - Discount not available as of 12/10/19

jon_slider · 2020-05-23T17:13:11.000Z

both is best

silver colored Tools are nla

Neal has some colored ones

Tendou · 2020-05-25T09:24:04.000Z

Anyone got the xpg3 version? Is it that bad?

jon_slider · 2020-05-25T13:43:49.000Z

Tendou:

Anyone got the xpg3 version? Is it that bad?

yes, and yes

you already asked before, here:

Drop.com $20 off - Lumintop Copper/Brass Tool for $10 - Discount not available as of 12/10/19 BudgetLightForum Deal Alerts

true Low CRI produces low quality spectrum (specifically unable to correctly show red properly), high quantity High CRI produces High quality, lower quantity brightness is not the most important thing, to me As a beginner, I spent time looking at brightness specs, as a starting point as I became a more experienced flashoholic, I started to realize quality is more important than quantity, to me I do not use maximum on my AAA lights… so maximum is not important to me I do use my AAA lights…

my words and pictures online cannot really show you what you need to see

I think you should buy both, and decide for yourself.

buck91 · 2020-05-25T13:53:20.000Z

Love my N219 Tool Ti and my N219 Drop Cooper (although I’m not a fan of copper patina, sure does look sharp new!).

jon_slider · 2020-05-25T14:07:01.000Z

buck91:

… I’m not a fan of copper patina

you can make copper lose its patina, even inbetween the knurling, by soaking the light in ketchup… but, that produces a dull pink color, not shiny. Basically the vinegar in the ketchup, and the acid from the tomatoes, etches the copper.

when I want to polish my copper, I use a jewelers rouge cloth, or a yellow sunshine cloth. It only gets the high spots though…

Geuzzz · 2020-05-25T15:24:49.000Z

djozz:

Anything from Drop (or anything from the US) goes via dutch customs (€18 extra minimum), so not worth it.

Should have read this earlier

Tendou · 2020-05-26T07:46:52.000Z

I was thinking of getting another one. And if for normal emergency purpose, will the cree gives more usable light or is negligible. The Cree will suck tint wise. And I don’t like cold white.

But will it be more helpful in dark basement or dark building car parking space.

Tendou · 2020-05-28T14:27:05.000Z

Well just received the nichia. I think the middle mode is plenty bright. No need to go the xpg3 route.

And middle mode is really important I think. So in future I’ll be getting light with 3 mode also. Maybe another drop, this time a brass one.

Geuzzz · 2020-05-28T15:39:38.000Z

2700k sst-20

jon_slider · 2020-05-28T17:05:57.000Z

Tendou:

Well just received the nichia. I think the middle mode is plenty bright. No need to go the xpg3 route.

Yay! congratulations

.

Geuzzz:

2700k sst-20

very nice! :+1:

.

Received a CuTool w 219c… This time there was no glue, the pill unscrewed easily.

Installed 3000k 219b 9080, shown next to 219b 4500k 9080

Copper Kills Coronavirus, pic is a link to more info

jon_slider · 2020-06-26T00:14:47.000Z

look, a new Mechanical Clicky (that can handle LiIon) Ti Tool:

youtube.com

- YouTube

Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.

and fwiw
Neal has some of the TiTools with the eSwitch on sale

jon_slider · 2020-10-22T15:24:01.000Z

lumenzilla:

^
Yes, they’re great clips.
I’ve put the ebay page into my watchlist since months ago but he doesn’t ship to my country.

I didn’t bother to ask the seller, just imagining the shipping fee will be not cheap.

the preon clips are now on sale for $9 for two

shipping will be about that much,
ask the seller, he is very helpful and I believe he will mail to you.
PM me if you want me to remail to you

Here is my latest clip install, it is deeper carry, and I am very happy with the hatclip configuration. (bezel up for handsfree clipped to a hat brim)

I added an extra O ring between the lens and reflector to install the clip above the brass pill.

IF I had a thin metal washer, I could install below the brass pill.
I tried making a ring from steel wire… it was too thick and the light did not work… The extra washer under the lens is working well…

…

ps, the CuTool is no longer on sale, but that did not stop me from ordering another one.

nocturne · 2020-10-22T15:53:25.000Z

Nice clip. Thanks for the tip!

jon_slider · 2020-10-22T15:57:37.000Z

nocturne:

Thanks for the tip!

Happy to share info here. Glad you stopped by.

nocturne · 2020-10-22T18:21:34.000Z

Ordered the 2 clips. But I can’t seem to find a Tool AAA Ti Nichia anywhere. But the clips are just right, and I’ll find a use for them. One can go right on my Tool AAA Cu Nichia.

jon_slider · 2020-10-22T18:29:57.000Z

nocturne:

can’t seem to find a Tool AAA Ti Nichia anywhere.

atm the only one I know available, is blue }P

nocturne · 2020-10-22T19:03:11.000Z

jon_slider:

nocturne:

can’t seem to find a Tool AAA Ti Nichia anywhere.

atm the only one I know available, is blue }P

Henk4U2 · 2020-10-22T22:28:43.000Z

jon_slider:

nocturne:

can’t seem to find a Tool AAA Ti Nichia anywhere.

atm the only one I know available, is blue }P

I have bought the blue Ti Tool from Drop.
The color of this blue Ti Tool is not as (solid) blue as the edges of this post, for instance.
It is more like a blueish haze on the titanium surface. Nothing like the blue Sofirn.
I am (a bit) colorblind, and I like them both.

jon_slider · 2020-10-31T03:35:32.000Z

preon2 clip on drop.com Copper AAA Tool

the clips are on ebay, the lights are on drop… a match made in heaven

modded to sw45k with reversible hatclip:

Unheard · 2020-10-31T07:44:37.000Z

jon_slider:

ask the seller, he is very helpful and I believe he will mail to you.
PM me if you want me to remail to you

He referred to the ebay international shipping program, but that’s not offered at least in Germany, so I’m stuck. Told him, no answer .

Yes, the clip looks nice, good finding.