Ended.

freeme · 2019-09-14T14:53:57.000Z

XHP50.2 figures doesn't seems to be right. I asked Neal not to stock up first.

MARCH C8 XHP50.2 (CW) / 2246.9lm / 21700-48G / 6.45A MARCH C8 SST40 (NW) / 1975.7lm / 21700-48G / 6.2A ASTROLUX FT03 XHP50.2 / 4060.7lm / VTC5A / 9+A Based on my initial test result. We have decided to proceed to stock up XP-L HI and SST40 first.

Unloco:

Will version XHP50.2(3V) be available?

enesrap · 2019-09-14T15:32:46.000Z

It is known what distance MARCH C8 XHP35 HI throws?

freeme · 2019-09-15T05:48:33.000Z

MARCH XHP50.2 - Turbo Activated.

Full Runtime graph to be presented at a later date.

Stepdown to 67.3% after C8 reaches 50°C (53°C exterior). Output increased to 80% after C8 is forced to cool down to 40°C (±42°C exterior).

Fluctuation between 37-73s period was caused by my IR thermometer measurement. Please ignore.

Test was aborted at 139s as value is almost constant.

freeme:

Unfortunately, i did not order XHP35 version. Cannot answer your question. There should be stepdown feature in firmware.

Manufacturer specified SST40 version is temperature controlled:

Stepdown from 7A to 4A when temperature reaches @±60°C. Once temp drops under @±50°C, output will increase to 7A. (To be verified).

Dioda:

One more question Freeme. Does the boost driver in the XHP35 version allow to use turbo with almost depleted battery? Is there any additional info on both drivers?

blueb8llz · 2019-09-14T19:11:59.000Z

I’m holding back til the xhp50.2 releases.

Unloco · 2019-09-14T21:10:50.000Z

freeme:

XHP50.2 figures doesn’t seems to be right. I asked Neal not to stock up first.

Ended. - #58 by freeme

Unloco:

Will version XHP50.2(3V) be available?

blueb8llz:

I’m holding back til the xhp50.2 releases.

+1

freeme · 2019-09-16T17:54:06.000Z

All replied.

Dioda · 2019-09-17T20:07:37.000Z

Hi what exactly is the SST40 color temp? Is it 5000k or the 5700 version?

freeme · 2019-09-18T12:27:22.000Z

Dioda:

Hi what exactly is the SST40 color temp? Is it 5000k or the 5700 version?

Lux-Perpetua · 2019-09-18T13:27:21.000Z

freeme:

All replied.

Same again, did not receive the code(s). Can you please send me the information? Thank you.

mxyzptlk · 2019-09-19T14:48:13.000Z

Hi,
just now I get my March C8 XHP 35 HI (21700) a very well manufactured Flashlight, with a clear, beautiful CW.
But there is a problem, the batterytube has a diameter of 21,6mm, which is very tight, so my Sofirn and LiitoKala batteries do not fit.
Does anyone have an idea which batteries could fit?

freeme · 2019-09-19T15:00:27.000Z

Unprotected cell with OEM wrapper for 21700 is preferred.

mxyzptlk:

Hi, just now I get my March C8 XHP 35 HI (21700) a very well manufactured Flashlight, with a clear, beautiful CW. But there is a problem, the batterytube has a diameter of 21,6mm, which is very tight, so my Sofirn and LiitoKala batteries do not fit. Does anyone have an idea which batteries could fit?

mxyzptlk · 2019-09-19T15:22:29.000Z

Thank you!

I just ordered some Samsung INR21700-40T 4000mAh - 35A, I think they will be good.

mxyzptlk · 2019-09-19T18:47:08.000Z

Would anyone be so nice and could explain to me how I can set the individual groups.
My English is not so good that I can understand what is meant with:

>through the 3 stars on the back of the short circuit, you can set them to<

What is meant with 3 stars and what is the back of the short circuit?

Thank you!

Regards
Daniel

80T · 2019-09-19T20:00:46.000Z

mxyzptlk:

Would anyone be so nice and could explain to me how I can set the individual groups. My English is not so good that I can understand what is meant with: >through the 3 stars on the back of the short circuit, you can set them to< What is meant with 3 stars and what is the back of the short circuit? Thank you! Regards Daniel

The XHP35 boost driver does not have the 3 stars on the driver, thus no mode groups. Only the 7135 drivers have the 3 extra mode groups, like the XP-L HI and XM-L2 versions.

mxyzptlk · 2019-09-19T22:51:18.000Z

Now I understand, thank you for the explanation!
Kind Regards
Daniel

Lux-Perpetua · 2019-09-20T03:10:58.000Z

Lux-Perpetua:

freeme:

All replied.

Same again, did not receive the code(s). Can you please send me the information? Thank you.

I still didn’t receive any code. Freeme, are you ignoring me for some reason? :-(

mbp · 2019-09-24T23:14:56.000Z

Sent PM, I would like a code

freeme · 2019-09-25T01:49:51.000Z

Sent.

mbp:

Sent PM, I would like a code

Lux-Perpetua · 2019-09-25T05:30:47.000Z

Can you please tell me why you keep ignoring my requests, Freeme?

I have now asked three times in this thread for sending me the code - no answer.

https://budgetlightforum.com/t/-/57883/3

https://budgetlightforum.com/t/-/57883/93

https://budgetlightforum.com/t/-/57883/100

I have sent you a PM about it, kindly asking what’s wrong - no answer.

liteupmynite · 2019-09-28T22:37:19.000Z

Received my black and sand lights.