ENDED.

freeme · 2020-01-11T04:01:40.000Z

Thank you for your continued support! :BEER: :THUMBS-UP:

Kit Latura:

Ordered

Kit_Latura · 2020-02-03T20:55:03.000Z

Mine has arrived without manual. Any idea where to get it?

What is supposed to be inside the package?

Kit_Latura · 2020-02-04T16:08:44.000Z

Driver works at 4A (max) and I can’t see flickering PWM.
It has temperature protection like new Convoy Drivers.

?

MascaratumB · 2020-02-04T16:18:38.000Z

Great light! This seems to be the “natural” evolution of their VG10!

freeme · 2020-02-04T16:23:09.000Z

Flashlight alone according to BG site.

Kit Latura:

Mine has arrived without manual. Any idea where to get it? What is supposed to be inside the package?

From what i understand:

Operation:

Configuration mode:

5x quick half press when light is in ON state.
Flashlight will flash 1x > 2x > 3x > 4x > 5x time sequence. Number of flashes correspond to the group number.
Turn OFF the light to select your preferred group. ( example: to select group #2, turn OFF light when XT35 flashes twice.

5 groups:

2000lm
2000lm - 10lm (default)
2000lm - 400lm
2000lm - 1200lm -10lm
2000lm - 12000lm - 400lm -10lm

Double-click to enter Strobe in any modes.

freeme · 2020-02-04T16:24:53.000Z

MascaratumB:

Great light! This seems to be the “natural” evolution of their VG10!

Image via AMUTORCH buyer

Kit_Latura · 2020-02-04T16:49:19.000Z

freeme:

Flashlight alone according to BG site.

Kit Latura:

Mine has arrived without manual. Any idea where to get it? What is supposed to be inside the package?

From what i understand:

Operation:

Configuration mode:

5x quick half press when light is in ON state.

Flashlight will flash 1x > 2x > 3x > 4x > 5x time sequence. Number of flashes correspond to the group number.

Turn OFF the light to select your preferred group. ( example: to select group #2, turn OFF light when XT35 flashes twice.

5 groups:

2000lm

2000lm - 10lm (default)

2000lm - 400lm

2000lm - 1200lm –10lm

2000lm - 12000lm - 400lm –10lm

Double-click to enter Strobe in any modes.

Not working, I can’t change between different group modes. And can’t enter to strobe.

My XT35 is not like your photo. It hasn’t written XT35 anywhere, only B35 on head

freeme · 2020-02-04T17:01:42.000Z

Kit Latura:

freeme:

Flashlight alone according to BG site.

Kit Latura:

Mine has arrived without manual. Any idea where to get it? What is supposed to be inside the package?

From what i understand:

Operation:

Configuration mode:

5x quick half press and release (when light is in ON state).

Flashlight will flash 1x > 2x > 3x > 4x > 5x time sequence. Number of flashes correspond to the group number.

Turn OFF the light to select your preferred group. ( example: to select group #2, turn OFF light when XT35 flashes twice.

5 groups:

2000lm

2000lm - 10lm (default)

2000lm - 400lm

2000lm - 1200lm -10lm

2000lm - 12000lm - 400lm -10lm

Double-click to enter Strobe in any modes.

Not working, I can’t change between different group modes. And can’t enter to strobe. My XT35 is not like your photo. It hasn’t written XT35 anywhere, only B35 on head

freeme · 2020-02-04T17:03:16.000Z

Does it goes into configuration mode >>> 5x quick half press and release (when light is in ON state)?

Kit Latura:

Not working, I can’t change between different group modes. And can’t enter to strobe. My XT35 is not like your photo. It hasn’t written XT35 anywhere, only B35 on head

Kit_Latura · 2020-02-04T17:06:11.000Z

freeme:

Does it goes into configuration mode >>> 5x quick half press and release (when light is in ON state)?

Kit Latura:

Not working, I can’t change between different group modes. And can’t enter to strobe. My XT35 is not like your photo. It hasn’t written XT35 anywhere, only B35 on head

No

freeme · 2020-02-04T17:14:55.000Z

Strange. Are you able to switch between different light level? Do you recognize any of the stated grouping?

This should be the updated one.

5 groups:

2000lm
400lm-1200lm-2000lm
100lm-400lm-1200lm-2000lm
10lm-400lm-1200lm-2000lm
10lm-100lm-400lm-1200lm-2000lm

Kit Latura:

freeme:

Does it goes into configuration mode >>> 5x quick half press and release (when light is in ON state)?

Kit Latura:

Not working, I can’t change between different group modes. And can’t enter to strobe. My XT35 is not like your photo. It hasn’t written XT35 anywhere, only B35 on head

No

Kit_Latura · 2020-02-04T17:25:38.000Z

freeme:

Strange. Are you able to switch between different light level? Do you recognize any of the stated grouping?

quote=Kit Latura]

freeme:

Does it goes into configuration mode >>> 5x quick half press and release (when light is in ON state)?

Kit Latura:

Not working, I can’t change between different group modes. And can’t enter to strobe. My XT35 is not like your photo. It hasn’t written XT35 anywhere, only B35 on head

No

Maybe 2000 - 400. Not 2000-10 of default mode. I’m sure about this. Strobe mode still inaccessible

My switch is forward clicky. It’s right?

freeme · 2020-02-04T17:30:45.000Z

Do you have a soldering iron? I just realized that there are two type of driver for this light on AMUTORCH TaoBao.

The list that i have posted is for Daily Mode firmware. Very high chance that your version is Tactical Mode version, which requires you to manually select the group by bridging the pads shown in pic. Are you able to check yours?

Kit Latura:

freeme:

Strange. Are you able to switch between different light level? *Do you recognize any of the stated grouping?*

quote=Kit Latura] [quote=freeme]

Does it goes into configuration mode >>> 5x quick half press and release (when light is in ON state)?

Kit Latura:

Not working, I can’t change between different group modes. And can’t enter to strobe. My XT35 is not like your photo. It hasn’t written XT35 anywhere, only B35 on head

[/quote]
No

Maybe 2000 - 400. Not 2000-10 of default mode. I’m sure about this. Strobe mode is inaccessible

Kit_Latura · 2020-02-04T18:12:31.000Z

If remove the bridge there’s only the high mode.
With the pads bridged, it have group mode of 2000 and 400 lumens, again.

there is some solder in the red area. Can it have something to do with it?

freeme · 2020-02-04T18:14:23.000Z

Seems correct, no bridge equal to group #1, single mode at 2000lm.

Kit Latura:

If remove the bridge there’s only the high mode. With the pads bridged, it have group mode of 2000 and 400 lumens, again. !Telegram: Join Group Chat! there is some solder in the red area. Can it have something to do with it?

freeme · 2020-02-04T18:22:30.000Z

You tried soldering the grouping that you want? Or you mean you can only get 2000-400, despite bridging a different pad?

Kit Latura:

With the pads bridged, it have group mode of 2000 and 400 lumens, again.

Kit_Latura · 2020-02-04T19:10:55.000Z

freeme:

You tried soldering the grouping that you want? Or you mean you can only get 2000-400, despite bridging a different pad?

Kit Latura:

With the pads bridged, it have group mode of 2000 and 400 lumens, again.

When soldering pads number 5, now I have access to this group of modes.(Hurray!) . But flashlight still without strobe mode

shirnask · 2020-02-04T19:41:23.000Z

Not able to switch mode groups either. Same issues as Kit Latura

freeme · 2020-02-09T16:23:06.000Z

shirnask:

Not able to switch mode groups either. Same issues as Kit Latura

ENDED. BLF User Negotiated Deals

Do you have a soldering iron? I just realized that there are two type of driver for this light on AMUTORCH TaoBao. The list that i have posted is for Daily Mode firmware. Very high chance that your version is Tactical Mode version, which requires you to manually select the group by bridging the pads shown in pic. Are you able to check yours? [image] [/quote] No Maybe 2000 - 400. Not 2000-10 of default mode. I’m sure about this. Strobe mode is inaccessible

TexasToasted · 2020-02-09T16:40:29.000Z

The ability to hard code the mode selection with solder and no strobe mode makes this light much more interesting to me. Too bad it’s already sold out