ENEDED

[vwpieces]

@Wieselflinkpro

@vwpieces

Thanks for the picture. But the pictures of diozz are realy helpfull too.

I think the head must be 1-2mm higher or deeper. The Optic can be held over the mcpcb by laying on the head. The legs of the optic will protect again rotating the optic if the spacing is set by the deeper space in the head.

You are welcome.
Picture shows an example of proper fitment, of a well designed optic already in use without issues. Shown as possible design refinement for future and or replacements heads. The Carclo optic is capable of greater pressures from the thicker legs providing support on top of the MCPCB.

Here are the Noctigon and Carclo triple parts test fit inside the head. Stupid easy. Fits snug and bezel is tightly seated.