Faulty batch of Nanjg AK-47A drivers from fasttech : Newbies beware

I ordered 2 of them, the red wire was incorrectly soldered in both the drivers (soldered to the wrong side of the reverse polarity protection diode).

A hobbyist building his first flashlight may not recognize this as everything still apparently works with the driver, only the current becomes limited to 300-500 mA instead of 1050mA. So it is a good practice to always measure tailcap current, and remember Murphy’s law.

The fix was pretty simple, but I wasted countless hours doubting my programming ability / soldering skill before figuring out the defect. Makes me want to punch the assembler in his face.