Fireflies E07 preview

contactcr · 2020-09-25T21:03:34.000Z

twisted raven:

Looks like they just stuck the ROT66v2 optic in an E07. So it should be the same bezel diameter as the ROT66.

This guy problem solves

VrestoTaylor · 2020-11-22T14:17:47.000Z

i wanted to buy this one…are the owners here happy with this one?its a bit older model….

Pip · 2020-11-22T14:43:53.000Z

I’m very happy with mine but there’s supposed to be news of a gen 2 coming soon. Hopefully with a better optic.

VrestoTaylor · 2020-11-22T15:03:27.000Z

really??? oh…again i have to wait:)

VrestoTaylor · 2020-11-22T15:06:51.000Z

anyway i heard about 20 sec of turbo for xplhi…

jp9mm · 2020-11-22T15:17:17.000Z

All those pics but none auxiliary led

G.P · 2020-11-22T16:07:45.000Z

vresto:

anyway i heard about 20 sec of turbo for xplhi…

If you can use turbo for much longer than that, the turbo isn’t high enough IMO!

I can turn it down myself (with the button or with the software) if I want a longer running level of brightness. Turbo is for momentary use…that’s literally the whole point of having a turbo. Like nitrous on a vehicle. Use it too much and it’ll probably blow up, but it’s there for short bursts when you really need it. :sunglasses:

MokrySedeS · 2020-11-22T17:15:51.000Z

vresto:

i wanted to buy this one…are the owners here happy with this one?its a bit older model….

I was happy until it broke - switch doesn’t register clicks. I’ve contacted the company about the issue. They asked me to provide video evidence, which I did and then I got ignored. Not recommended.
Just go buy Emisar/Noctigon from Hank. I’m sure you’ll be more satisfied in the long run.

BOMBAY · 2020-11-22T17:56:24.000Z

MokrySedeS:

vresto:

i wanted to buy this one…are the owners here happy with this one?its a bit older model….

I was happy until it broke - switch doesn’t register clicks. I’ve contacted the company about the issue. They asked me to provide video evidence, which I did and then I got ignored. Not recommended.
Just go buy Emisar/Noctigon from Hank. I’m sure you’ll be more satisfied in the long run.

the same happened with the switch in my pl47. If you remove the rubber of the switch, you will probably find a small, round and thin golden plate that is loose

VrestoTaylor · 2020-11-22T18:24:23.000Z

I buy ooonly usb lights…emisars are usb negative.

Pip · 2020-11-22T18:26:17.000Z

Ummm… E07 is not usb…

SKV89 · 2020-11-22T18:28:52.000Z

MokrySedeS:

vresto:

i wanted to buy this one…are the owners here happy with this one?its a bit older model….

I was happy until it broke - switch doesn’t register clicks. I’ve contacted the company about the issue. They asked me to provide video evidence, which I did and then I got ignored. Not recommended.
Just go buy Emisar/Noctigon from Hank. I’m sure you’ll be more satisfied in the long run.

Just wait a while. Jack is real busy and doesn’t check messages and emails for days or even weeks at a time. I’m guessing he is focused on the new lights right now. But he will surely get back to you.

Jack had over a dozen “defective” lights shipped to me to check. More than half of the lights were fine and I couldn’t reproduce the claimed issues. I suggested to him from then on that he should request customers to show videos of the defect before allowing a return. I’m glad he listened. Business is hard for small businesses when people treat returns like it’s Costco.

SKV89 · 2020-11-22T18:30:16.000Z

vresto:

I buy ooonly usb lights…emisars are usb negative.

E07 does not have usb. E07v2 and all the new Fireflies lights coming out will have usb-c fast charge along with other major improvements.

MokrySedeS · 2020-11-22T19:04:46.000Z

BOMBAY:

MokrySedeS:

vresto:

i wanted to buy this one…are the owners here happy with this one?its a bit older model….

I was happy until it broke - switch doesn’t register clicks. I’ve contacted the company about the issue. They asked me to provide video evidence, which I did and then I got ignored. Not recommended.
Just go buy Emisar/Noctigon from Hank. I’m sure you’ll be more satisfied in the long run.

the same happened with the switch in my pl47. If you remove the rubber of the switch, you will probably find a small, round and thin golden plate that is loose

Can I remove it with no damage? Will I be able to put it back? Did you fix yours?

SKV89:

MokrySedeS:

vresto:

i wanted to buy this one…are the owners here happy with this one?its a bit older model….

I was happy until it broke - switch doesn’t register clicks. I’ve contacted the company about the issue. They asked me to provide video evidence, which I did and then I got ignored. Not recommended.
Just go buy Emisar/Noctigon from Hank. I’m sure you’ll be more satisfied in the long run.

Just wait a while. Jack is real busy and doesn’t check messages and emails for days or even weeks at a time. I’m guessing he is focused on the new lights right now. But he will surely get back to you.

Jack had over a dozen “defective” lights shipped to me to check. More than half of the lights were fine and I couldn’t reproduce the claimed issues. I suggested to him from then on that he should request customers to show videos of the defect before allowing a return. I’m glad he listened. Business is hard for small businesses when people treat returns like it’s Costco.

6 months have passed since then so it must be something else. Maybe he somehow forgot about me… which is doubtful. I’ve reminded him about myself after a week to no awail.
Should I contact him through his site or on the forum? Can you link me to his profile?

SKV89 · 2020-11-22T19:12:04.000Z

MokrySedeS:

BOMBAY:

MokrySedeS:

vresto:

i wanted to buy this one…are the owners here happy with this one?its a bit older model….

I was happy until it broke - switch doesn’t register clicks. I’ve contacted the company about the issue. They asked me to provide video evidence, which I did and then I got ignored. Not recommended.
Just go buy Emisar/Noctigon from Hank. I’m sure you’ll be more satisfied in the long run.

the same happened with the switch in my pl47. If you remove the rubber of the switch, you will probably find a small, round and thin golden plate that is loose

Can I remove it with no damage? Will I be able to put it back? Did you fix yours?

SKV89:

MokrySedeS:

vresto:

i wanted to buy this one…are the owners here happy with this one?its a bit older model….

I was happy until it broke - switch doesn’t register clicks. I’ve contacted the company about the issue. They asked me to provide video evidence, which I did and then I got ignored. Not recommended.
Just go buy Emisar/Noctigon from Hank. I’m sure you’ll be more satisfied in the long run.

Try both Email and BLF PM. It took 3 months for him to respond to my multiple emails for my Enogear AA a few years ago. He threw in a freebie that time too.

Just wait a while. Jack is real busy and doesn’t check messages and emails for days or even weeks at a time. I’m guessing he is focused on the new lights right now. But he will surely get back to you.

Jack had over a dozen “defective” lights shipped to me to check. More than half of the lights were fine and I couldn’t reproduce the claimed issues. I suggested to him from then on that he should request customers to show videos of the defect before allowing a return. I’m glad he listened. Business is hard for small businesses when people treat returns like it’s Costco.

6 months have passed since then so it must be something else. Maybe he somehow forgot about me… which is doubtful. I’ve reminded him about myself after a week to no awail.
Should I contact him through his site or on the forum? Can you link me to his profile?

VrestoTaylor · 2020-11-22T19:29:41.000Z

SKV89:

vresto:

I buy ooonly usb lights…emisars are usb negative.

E07 does not have usb. E07v2 and all the new Fireflies lights coming out will have usb-c fast charge along with other major improvements.

Skv89.thanks to you many times…how can be me so blind…this model has no usb.i almost ordered…cant believe this happens to me…thank youuu…order deleted.uhhh

Pip · 2020-11-22T19:41:55.000Z

I’m eagerly awaiting the release of the gen2, hoping for a more throwy optic. And if they can make it brighter that’s always a plus. The gen1 is still one of my favorite lights.

BOMBAY · 2020-11-23T01:53:28.000Z

[quote=MokrySedeS]

BOMBAY:

MokrySedeS:

vresto:

i wanted to buy this one…are the owners here happy with this one?its a bit older model….

I was happy until it broke - switch doesn’t register clicks. I’ve contacted the company about the issue. They asked me to provide video evidence, which I did and then I got ignored. Not recommended.
Just go buy Emisar/Noctigon from Hank. I’m sure you’ll be more satisfied in the long run.

the same happened with the switch in my pl47. If you remove the rubber of the switch, you will probably find a small, round and thin golden plate that is loose

Can I remove it with no damage? Will I be able to put it back? Did you fix yours?

I removed the cover, the cover was not damaged, unfortunately the micro-switch broke down and I do not have enough skills to fix it, pl47 is difficult to repairs

Sillen · 2020-12-30T07:11:02.000Z

I just received an E07 from BG. 2 minutes later I broke the glass lens.

The glass between the optics and the bezel was rattling so I unscrewed the bezel for a looksee and the glass rolled out and hit the floor tiles - broken.

1) Where can I get a replacement?
2) I see mention of a UCL 35mm x 1.9mm UCL lens but will that fit without mods?
3) Is this it? UCL Lens - Flashlightlens.com - Online Store
4) Is it bezel - oring - glass or bezel - glass - oring?

Tail cap has button - no spring. Is that normal?

contactcr · 2020-12-30T14:18:31.000Z

Sillen:

I just received an E07 from BG. 2 minutes later I broke the glass lens.

The glass between the optics and the bezel was rattling so I unscrewed the bezel for a looksee and the glass rolled out and hit the floor tiles - broken.

1) Where can I get a replacement?
2) I see mention of a UCL 35mm x 1.9mm UCL lens but will that fit without mods?
3) Is this it? UCL Lens - Flashlightlens.com - Online Store
4) Is it bezel - oring - glass or bezel - glass - oring?

Tail cap has button - no spring. Is that normal?

1 & 2) The UCL lens works but the bezel has a very slight gap using it. It does improve the tint of the beam though. However, there are cheaper options I suspect: Ask FireFlies directly (ff-light@hotmail.com), they are usually open to selling parts. The other option is to find an (online?) store that sells watch parts. They sell clear glass is any size and thickness you could ever want typically.

3) yes
4) bezel, oring, glass - almost always. There is a groove in the inside of the bezel and that keeps water from coming in the front. There is usually another O ring on the outside body threads that keep water out from the sides.