Fireflies ROT66, Born for fans of flashlight

Edness · 2018-09-08T23:31:48.000Z

Got mine today. DOA

2 of them don’t light up and all the emitters are crushed. Also missing gitd tape inside the light.

Newlumen · 2018-09-08T23:47:07.000Z

SKV89:

JasonWW:

SKV89:

Champagne host 219B 4500k 9080
4650 lumens at 0s
1482 lumens at 30s
Dims at about 17s

Black host 219B 4500k 9080
4500 lumens at 0s
3991 lumens at 30s

I tested the Champagne host twice and it steps down at about 17s. It doesn’t do that on the Black host. Anyone have any idea why that is?

Like was said earlier, the thermal protection may be kicking in way too soon on the champagne model. Try manually setting the thermal limit. I’ve got a video on it if you don’t know how.

I took temperature measurements with a Fluke 62 Max+ and here are the results:
Black host: 49.9 Deg C at 65s step down
Champagne host test 1: 37.8 Deg C at 42s step down
Champagne host test 2: 36.6 Deg C at 43s step down

Weird that previously the champagne host steps down at 19s all three times I tested it on the first day I received the lights. I don’t remember the ambient temp being much warmer that day.

So yea I guess the thermal step down temperature varies greatly from unit to unit. I’ll look at your instructions on how to manually set the thermal limit.

So far, I’m really enjoying the ROT66 219B. I’ve been blasting turbo frequently just to admire the beautiful HI CRI and perfect tint.

Thanks… I am going with the black host either way.

JasonWW · 2018-09-09T00:38:08.000Z

Newlumen:

SKV89:

JasonWW:

SKV89:

Champagne host 219B 4500k 9080
4650 lumens at 0s
1482 lumens at 30s
Dims at about 17s

Black host 219B 4500k 9080
4500 lumens at 0s
3991 lumens at 30s

I tested the Champagne host twice and it steps down at about 17s. It doesn’t do that on the Black host. Anyone have any idea why that is?

Like was said earlier, the thermal protection may be kicking in way too soon on the champagne model. Try manually setting the thermal limit. I’ve got a video on it if you don’t know how.

I took temperature measurements with a Fluke 62 Max+ and here are the results:
Black host: 49.9 Deg C at 65s step down
Champagne host test 1: 37.8 Deg C at 42s step down
Champagne host test 2: 36.6 Deg C at 43s step down

Weird that previously the champagne host steps down at 19s all three times I tested it on the first day I received the lights. I don’t remember the ambient temp being much warmer that day.

So yea I guess the thermal step down temperature varies greatly from unit to unit. I’ll look at your instructions on how to manually set the thermal limit.

So far, I’m really enjoying the ROT66 219B. I’ve been blasting turbo frequently just to admire the beautiful HI CRI and perfect tint.

Thanks… I am going with the black host either way.

You’re misunderstanding. I wasn’t saying all of the champagne colored lights had their thermal protection calibrated too low. It just doesn’t work like that. Each individual MCU or micro processor control unit (Atiny85 in this case) has its own unique tolerances concerning the baseline temperature reading. It samples the temperature inside the MCU itself as opposed to an external temperature sensor. The firmware being programmed into all of them are set at the same temperature, but Fireflies can’t go through each light and calibrate the baseline temperature. So some lights are going to activate the thermal protection too soon and others may activate it too late, there’s always going to be a certain variable. So if it’s not functioning the way that you like, the easiest thing to do is just manually set it yourself.

steel_1024 · 2018-09-09T06:31:09.000Z

Edness:

Got mine today. DOA

2 of them don’t light up and all the emitters are crushed. Also missing gitd tape inside the light.

When you try to remove the optical lens.
You rotated the optical lens.

Then, You removed (Cut off) all the “roof” of the LED.
There may be some LEDs injured？

ToyKeeper · 2018-09-09T06:29:58.000Z

steel_1024:

Edness:

Got mine today. DOA

2 of them don’t light up and all the emitters are crushed. Also missing gitd tape inside the light.

When you try to remove the optical lens.
You rotated the optical lens.

Then, You removed (Cut off) all the “roof” of the LED.

It’s a design flaw, not user error. And no domes have been cut off; XP-L HI emitters don’t have a dome. The problem is that the optic was not designed for XP-L HI — it rides too deep and slices into the emitters. Basically, the lights were broken at the factory by tightening the bezel too far.

This issue is known by Fireflies, and it is the reason why the XP-L HI version is no longer available. It has been replaced with XP-G3 and SST20 instead, because they fit into the optic better.

ToyKeeper · 2018-09-09T06:33:40.000Z

SKV89:

So yea I guess the thermal step down temperature varies greatly from unit to unit.

It does. The temperature sensor is in the attiny85 chip, which is not calibrated. It can vary by 20 C from one chip to the next.

On newer firmware, which I think might be used on the next batch, there is a calibration function to help make the behavior more consistent. The user can calibrate the sensor by telling the light how warm it is now, and also set a limit for how hot it should get before stepping down.

steel_1024 · 2018-09-09T06:35:57.000Z

ToyKeeper:

It’s a design flaw, not user error……………

Oh!

I understand

JasonWW · 2018-09-09T07:07:24.000Z

steel_1024:

ToyKeeper:

It’s a design flaw, not user error……………

Oh!

I understand

The xpl-hi base is slightly taller than the Nichia base. It seems the optic height was adjusted for the Nichia. So when they installed the XPL and tightened the bezel it would crush it slightly.

JasonWW:

The xpl-hi emitters have a taller base, the white part of the LED, then the Nichia emitters. I believe the xpl-hi are 1mm tall and the 219B are 0.4mm tall.

The 3 legs built into the TIR lens is what’s supposed to prevent the lens from crushing the emitters. I guess they drilled the holes in the mcpcb too deep.

The_Flashaholic · 2018-09-15T08:46:07.000Z

I knocked my ROT66 219b over yesterday and the LED’s flickered then went out, is that normal?

Also still no sign of my replacement head for the XP-L.

Sillen · 2018-09-15T11:05:57.000Z

A firm tap on the bottom will do it too

The_Flashaholic · 2018-09-15T11:50:53.000Z

Sillen:

A firm tap on the bottom will do it too

Will make the LED’s flicker?

Sillen · 2018-09-15T12:02:22.000Z

flickers once or twice then turns off

Flashy_Mike · 2018-09-15T13:51:46.000Z

Cells lost contact:

Fireflies ROT66 Flashlight LED Flashlights – General Info

I suspect there is a major flaw in the battery carrier. Did some measurements and this are the results: 67 mm is the space between positive cell contact and fully compressed spring at the negative end. 63.7 to 64.7 mm is what I measured with uncompressed springs. I used this light for about one day mostly with only 1 cell (30Q with flat top), I guess this cell sat where I measured 64.7 mm which means this spring is already worn out a bit (after one day of usage). According to datasheet a Sa…

The flickering seems to be the intended behaviour after inserting cells (= powerup).

SKV89 · 2018-09-16T04:20:13.000Z

SKV89:

I just received my Fireflies that I ordered on the last day of the GB. I still haven’t received the one I ordered before the GB.

Here are the results measured with the TA Lumen Sphere calibrated with Maukka lights.

Champagne host 219B 4500k 9080
4650 lumens at 0s
1482 lumens at 30s
Dims at about 17s

Black host 219B 4500k 9080
4500 lumens at 0s
3991 lumens at 30s

Edit: The champagne host was tested with fresh off the charger VTC5D and the same cells were then used on the black host so that might have accounted for some of the lumen differences at 0s.

I tested the Champagne host twice and it steps down at about 17s. It doesn’t do that on the Black host. Anyone have any idea why that is?

The tint is super nice. It’s the best looking tint I have seen to date. I was afraid it might look too magenta as some people have commented on the 4500k 9080 but I’m so glad it is not magenta at all, just some pink/rosy. Even on turbo, it’s not as rosy looking as what you see in the pics. It’s very white at the center of the beam. On the lower modes, it is just neutral white and perfect.

I compared it with all of my other lights that looked neutral tinted before and now they look ugly yellow/green.

I just received the first ROT66 219B champagne color that I ordered before the GB. It got stuck at HK custom for over a month. The other two ROT66 I ordered at the last day of the GB came two weeks ago as posted above.

Anyways, I did a quick read with the TA Lumen Tube and got 4,560 lumens at 1s.

Newlumen · 2018-09-16T04:26:29.000Z

Thanks for reviews. So far we have heard great things about fireflies lights and warranty. some people even bought 3 of them member like skv, and twisted raven… this tell me fireflies is a good light.

shirnask · 2018-09-16T04:34:54.000Z

Newlumen:

Thanks for reviews. So far we have heard great things about fireflies lights and warranty. some people even bought 3 of them member like skv, and twisted raven… this tell me fireflies is a good light.

Yeah, I have 2 more on the way :person_facepalming:

klrman · 2018-09-16T05:06:35.000Z

Any idea how long turbo would last with the XPL hi V3 3A?

wigglybroom · 2018-09-16T08:03:52.000Z

Should I wait to grab a Rot66? Seems like there’s little issues here and there, will they iron everything out? I really want a 219b sodacan!

The_Flashaholic · 2018-09-16T11:57:03.000Z

Maybe wait until we hear about people getting their faulty ROT’s sorted by Fireflies.

steel_1024 · 2018-10-07T17:10:17.000Z

FireFlies:

We have a few stock ROT66 with minor machining flaws or scratches available, those lights perform perfectly in function. If anyone have interested, please send me private message or email to ff-light@hotmail.com

Special low price!!

good news!