241

The quest for FW3A ‘Cheat Sheet’ perfection is closing in on…… P.E.R.F.E.C.T.I.O.N.!! :beer:

242

Together, we can do it :smiley:

243

Amen!! :+1: … :beer:

244

! !

glowy!
ring of glow tape inside the head
very easy

wle

245

:+1:
+1

246

@ wle

Is that a Glow Gasket thing from Neal??

What color?

247

what are u using to make it glow?

248

I am using a piece of gitd tape. All around the inner wall of the head.

249

that was what i did, just cut a ribbon from glow in the dark tape, about 3-4mm wide, kind of hard to get it straight inside the head, but you can do it with tweezers

! !

it’s SUPER bright, right next to the leds, it is probably making 2-5 lumens for a few sec after the light goes out

this is that same GITD tape from aliexpress i got about 5 months ago

still looking for things to do with it, it is still impressive

and i have a ring around the body of it too, but that doesn;t get charged by the LEDs so it is not as impressive or bright

wle

250

it is just basic green glow in the dark tape from aliexpress
you can get 1/2 x about 20 feet for about $3

i cut the ribbon and stuck it inside the head
green is the brightest GITD color
it isn;t as blue as my pic shows, that is white balance from the camera being fooled i assume

wle

251

Thanks wle… it looks good! :beer:

252

Control, lowest mode, charged glow disc.

253

yup
prob 5 lumens
what is a glow disc though?

wle

254

SO easy too

5 min

wle

255

You can buy them from Neals shop but I’ve been making some of my own.

256

Sorry about being overly critical. I’m picky about more things than I should be.

257

those are fun, glow tape is CHEAP and fast. :slight_smile:

wle

258

No that was great, always good to have someone else’s input, especially the creator of the thing.
I do these for myself and maybe help everybody who’s interested in some way too :+1:

True.

I added a strip of the glow tape to the clip groove too.

259

Maybe… you just can’t help it. . :innocent:

260

Cool! Thanks for the tip. Going to try that too.

@CRX — nice move on the thin GITD for the clip groove. I’m pretty happy with the top one. Also have a thin one on the body, but might take it off (looks a little busy).