Giveaway,the activity has ended

vapcell_Dennis · 2019-10-29T10:34:41.000Z

Kame Sennin:

vapcell Dennis:

Do many people pay attention to this function? Do many chargers have this function

I think all the people who have enough li-ion to keep some in long term storage and care about battery life use it … at least i do

Opus BT-C3100 don’t have it on the main UI but can be set to charge to 3.7V by modifying an internal switch

SkyRC MC3000 can do it by programming the right charge or discharge end voltage

XTAR VC4S has a Storage mode

Lii-500 can’t do it afaik

Thanks you very much,sir
We will pay attention to this function and hope it can be used vapcell charger in the future

vapcell_Dennis · 2019-10-29T10:37:31.000Z

Congratulations to the winners

Henk4U2 and oweban

Please contact us and tell us your detailed address and telephone number

We will ship as soon as possible

Henk4U2 · 2019-10-29T11:08:30.000Z

Thank you very much vapcell Dennis for giving us (eh: me) this opportunity

I will make good use of this charger. My current EveryDayCharger (EDC) sure needs some relief/backup!
And congratulations to oweban. Of course.

This brightens up my day, after talking 35min with my cable provider. Leading to a RMA.
He estimates the missus will be able to watch TV again by the time the postman rings with my new charger.
I think I’ll get myself a SUDOKU magazine

And last, but no least: PM is on it’s way to vapcell Dennis
Thanks again!!!

Henk4U2 · 2019-10-29T14:45:19.000Z

vapcell Dennis:

Congratulations to the winners

Henk4U2 and oweban

Please contact us and tell us your detailed address and telephone number

We will ship as soon as possible

PM sent. Thanks!

peabody · 2019-10-29T12:58:19.000Z

Congrats to the two winners and thanks to Vapcell for this GAW.

202bigmike · 2019-10-30T02:15:23.000Z

To the winners and Vapecell Dennis

Sparks65 · 2019-10-30T02:42:44.000Z

Congrats to the winners!!

Agro · 2019-10-30T06:11:04.000Z

Congratulations!

And thanks again Vapcell!

jamesearljonesisasca · 2019-10-30T10:35:42.000Z

Count me I n please! Thanks

raccoon · 2019-10-30T10:52:57.000Z

Congrats!

MascaratumB · 2019-10-30T11:06:52.000Z

Congrats winners and Thank you Vapcell

Ucm45 · 2019-10-30T13:11:04.000Z

Congratulations!

Dutcheee · 2019-10-30T13:24:52.000Z

Congratulations Henk4U2 and oweban!

I missed this gaw, looks like a nice charger.

desmondkun · 2019-10-30T13:57:42.000Z

Congrats.

Superstocker · 2019-10-30T15:29:21.000Z

Congratulations! Thank you for the giveaway.

vapcell_Dennis · 2019-11-01T11:04:00.000Z

@oweban are you here>?

oweban · 2019-11-01T11:35:49.000Z

Ah sorry! Have been off with my head in the clouds Will send you a PM now. Thanks so much!

Henk4U2 · 2019-11-28T23:00:24.000Z

The Vapcell S4+ charger has arrived. Maybe a bit late, and maybe a bit unexpected. Apparently everybody was so concerned the parcel should arrive a the right address that they put on some extra tracking codes. Which only made it harder for me to track it
But all’s well that end’s well. I’m looking forward to put it through its paces. Once again: thanks Vapcell.

d_t_a · 2020-06-15T02:53:55.000Z

I have a question for the Vapcell S4 Plus charger (manual is not so clear)

When in “Capacity Test” mode, what is the discharge current used?
I notice after setting to “Cap Test” mode (assuming set to “Manual” selector), I can adjust the charge current.
But what discharge current will be used during the “Cap Test”?

(I understand that slots 1 & 4 are up to 1A discharge and slots 2 & 3 up to 0.5A discharge. But is there a way to force “Cap Test” to use 1A or 0.5A or 0.25A discharge current, when in Cap Test mode)?

vapcell_Dennis · 2020-06-16T02:36:53.000Z

Hello, this Cap Test mode has three stages. It is difficult to set the current of three stages

We consider that the charging current can be selected, and the discharging current is automatically distributed according to the internal resistance of the battery