Giveaway,the activity has ended

Agro · 2019-10-30T06:11:04.000Z

Congratulations!

And thanks again Vapcell!

jamesearljonesisasca · 2019-10-30T10:35:42.000Z

Count me I n please! Thanks

raccoon · 2019-10-30T10:52:57.000Z

Congrats!

MascaratumB · 2019-10-30T11:06:52.000Z

Congrats winners and Thank you Vapcell

Ucm45 · 2019-10-30T13:11:04.000Z

Congratulations!

Dutcheee · 2019-10-30T13:24:52.000Z

Congratulations Henk4U2 and oweban!

I missed this gaw, looks like a nice charger.

desmondkun · 2019-10-30T13:57:42.000Z

Congrats.

Superstocker · 2019-10-30T15:29:21.000Z

Congratulations! Thank you for the giveaway.

vapcell_Dennis · 2019-11-01T11:04:00.000Z

@oweban are you here>?

oweban · 2019-11-01T11:35:49.000Z

Ah sorry! Have been off with my head in the clouds Will send you a PM now. Thanks so much!

Henk4U2 · 2019-11-28T23:00:24.000Z

The Vapcell S4+ charger has arrived. Maybe a bit late, and maybe a bit unexpected. Apparently everybody was so concerned the parcel should arrive a the right address that they put on some extra tracking codes. Which only made it harder for me to track it
But all’s well that end’s well. I’m looking forward to put it through its paces. Once again: thanks Vapcell.

d_t_a · 2020-06-15T02:53:55.000Z

I have a question for the Vapcell S4 Plus charger (manual is not so clear)

When in “Capacity Test” mode, what is the discharge current used?
I notice after setting to “Cap Test” mode (assuming set to “Manual” selector), I can adjust the charge current.
But what discharge current will be used during the “Cap Test”?

(I understand that slots 1 & 4 are up to 1A discharge and slots 2 & 3 up to 0.5A discharge. But is there a way to force “Cap Test” to use 1A or 0.5A or 0.25A discharge current, when in Cap Test mode)?

vapcell_Dennis · 2020-06-16T02:36:53.000Z

Hello, this Cap Test mode has three stages. It is difficult to set the current of three stages

We consider that the charging current can be selected, and the discharging current is automatically distributed according to the internal resistance of the battery

jerow23 · 2020-06-16T17:09:18.000Z

Finally another charger that can charge 21700 battery that 75mm long. Count me in

Alvaro52021 · 2020-06-16T19:08:16.000Z

count on me!!!

crz6662 · 2020-06-16T22:41:06.000Z

I’m in please.

MascaratumB · 2020-06-16T23:02:16.000Z

Alvaro52021:

count on me!!!!

crz6662:

I’m in please.

You probably didn’t notice, but this GAW is over folks:

Giveaway,the activity has ended Giveaways and Contests

Congratulations to the winners Henk4U2 and oweban Please contact us and tell us your detailed address and telephone number We will ship as soon as possible [image]

d_t_a · 2020-06-18T04:04:50.000Z

vapcell Dennis:

Hello, this Cap Test mode has three stages. It is difficult to set the current of three stages

We consider that the charging current can be selected, and the discharging current is automatically distributed according to the internal resistance of the battery

Thanks for the response.

Since the 2 outer slots (#1 & #4) have a max discharge current of 1A and the 2 inner slots (#2 & #3) have max discharge current of 0.5A.

Assuming I’m going to test 4pcs low-internal-resistance batteries (disregarding battery capacity/size), would that mean I’ll get 1A discharge current for slots #1 & 4 and 0.5A discharge current for slots #2 & #3? Or there are other factors to be considered?

crz6662 · 2020-06-20T03:40:17.000Z

Oh crap, by months. Oops. Thx.

vapcell_Dennis · 2020-06-20T04:00:51.000Z

d_t_a:

vapcell Dennis:

Hello, this Cap Test mode has three stages. It is difficult to set the current of three stages

We consider that the charging current can be selected, and the discharging current is automatically distributed according to the internal resistance of the battery

Thanks for the response.

Since the 2 outer slots (#1 & #4) have a max discharge current of 1A and the 2 inner slots (#2 & #3) have max discharge current of 0.5A.

Assuming I’m going to test 4pcs low-internal-resistance batteries (disregarding battery capacity/size), would that mean I’ll get 1A discharge current for slots #1 & 4 and 0.5A discharge current for slots #2 & #3? Or there are other factors to be considered?

You’re right. This is how the current is distributed. We think that the intelligent cap test is designed to facilitate the measurement of battery capacity. For example, when you go out or sleep, you can get the battery capacity

More specialized is to fully charge the battery and then use the discharge mode

Here you can choose the discharge current you want

Do you have any better suggestions？Thanks