GT Power Tachometer Mod ( Bushleague Modz )

old4570 · 2019-10-04T04:59:53.000Z

Made a video of the mod …

3v button cell > bye bye
AAA battery case ( 3v ) Hello

Open the tack , and cut or de solder the button slot cover …
This will expose the negative contact …
Cut a hole in the back cover
Solder wires ,
Put the case back together
I used double sided tape to hold the battery case to the back cover of the Tach
Switches came today , so I added a switch to isolate the batteries from the parasitic drain these Tach’s suffer from … ( Button cell is always depleted )

Rdubya18 · 2019-10-04T07:13:11.000Z

Good idea ! Fairly easy fix to that problem .

Henk4U2 · 2019-10-04T07:34:31.000Z

Nice solution.

Though I must admit that at first I didn’t have the foggiest notion what you use it for.
So I *oogled and found on *anggood.com:
Function:To measure RPM of a spinning propeller,2-9 blades ones,memorize peak RPM datas.

Maybe you said that in your video, but on my FireFox that is a silent movie.

old4570 · 2019-10-05T00:48:01.000Z

Nefarious ?
I guess I am taking money away from the button cell manufacturers ?
I dont know why , but they never last ( button cells ) for any length of time .
Except maybe in digital watches …

But every other device that uses one seem to always be flat , requiring a new battery .
Which is a little annoying !

And I do fly RC , so a Tachometer is standard kit .
Probably not something that Flashaholics might need , but I thought it an interesting mod . ( To share )

Micro Wing !

BlueSwordM · 2019-10-05T00:55:05.000Z

Buttons cells never last long before of extremely high internal resistance in anything remotely powerful.

FlashPilot · 2019-10-05T02:06:35.000Z

I wonder if it could read the RPM of a spinning shaft if a line were painted on it?

Lightbringer · 2019-10-05T03:53:00.000Z

Yeah, I found out the hard way that my calipers went dead just sitting around. Good thing I kept the original package (cardboard slides into formed killer-plastic) and could remove the (replacement) cell and stick it into the recess for storage.

Wonder if that doodad can measure pwm frequency…

old4570 · 2019-10-05T04:27:14.000Z

Lightbringer:

Yeah, I found out the hard way that my calipers went dead just sitting around. Good thing I kept the original package (cardboard slides into formed killer-plastic) and could remove the (replacement) cell and stick it into the recess for storage.

Wonder if that doodad can measure pwm frequency…

Funny you should say !
It does read something …
I put a small light to it ( WITH PWM ) and got about 22000 rpm