Helmet mount for Convoy s2+

dad · 2019-10-17T01:06:58.000Z

I am looking for a mount for my Convoy s2+ that sits on top of my MTB helmet. Does anyone have any recomendations?

Thankyou

Yokiamy · 2019-10-17T07:40:03.000Z

THIS ?

1stein · 2019-10-17T10:11:51.000Z

Or this ?

(for 3 regular flashlights)

MascaratumB · 2019-10-17T10:16:28.000Z

1stein:

Or this ?

(for 3 regular flashlights)

Although a bit uncomfortable to use in the head, I believe this would be the best option to use in a helmet, both using the light on the side or on the top!

1stein · 2019-10-17T10:25:22.000Z

MascaratumB:

1stein:

Or this ?

(for 3 regular flashlights)

Although a bit uncomfortable to use in the head, I believe this would be the best option to use in a helmet, both using the light on the side or on the top!

True. But considering it’s going to be mounted on a helmet there are also available options for stabilization. I use my Wizard mounted on the helmet. To secure firmly the head strap I used velcro straps . Used 3 or 4 of these to make the head strap stay in the same place. Riding hard for 2 years and no issues so far. (although it probably works only for helmets with vent holes since you need to go thru with the velcro)

Paul321 · 2019-10-17T11:42:12.000Z

You can try the Twofish
Or this one

siata94 · 2019-10-28T22:40:25.000Z

I’ve used the S2+ and other tube lights strapped to the helmet w/ 2 velcro straps, long enough to go between the helmet vents.
And a long lanyard looped into the helmet just in case. It’s been rock solid for me for a few years when I was still night riding
on my 170mm travel MTB (ie not on smooth fire access roads).

Without any sort of mounts, the key is using a helmet that has grooves near the center. Fortunately one of my helmets is perfectly suited
for a light so I use it as my dedicated night helmet.

Short of that, I think this is a great mount, with or without the gopro adapter (gopro adds more height to the light, might get knocked off
by branches):

Shapeways.com

GoPro universal flashlight mount by dogboydan on Shapeways

Check out GoPro universal flashlight mount by dogboydan on Shapeways and discover more 3D printed products in Camera & Video.

For the handlebar light, this mount is rock solid down the chunkiest trails, I and many of my buddies use the same mount:

Fenix Store

Fenix ALB-10 Quick-Release Bike Mount

Fenix ALB-10 Quick release bike mount and other fenix accessories from our online store: Fenix-store.com

Average Rating: 4

Price: USD 16.95

Viperkeeper · 2019-10-29T13:56:24.000Z

I just hot glue the lights (heads) to my helmet lol. I also glued 4x18650 and a vertically mounted Sony action camera w/Rode mic. If I crash I’m going to have a Emisar D4 sticking out of my head and my hair on fire. Probably not DOT approved anymore lol.