Help : Which brand of this flashlight ?

Hi

I have this flashlight but it has no label on it. It was working and after I changed new batteries (CR123A type), the light stops work.
I tried to open it in order to check the driver and the led but couldn’t do it, secondly I am not sure I have opened at the right location on its body. Please see pictures enclosed. Please let me know what brand and show me how to open it.
Many thanks.




It looks a lot like an Inova flashlight, can I see the back of the tailcap?

Hi

You are absolutely correct. The print on the tailcap is very difficult to see that was why I missed it. I have added the tailcap picture with those previous pictures.
It printed : “Emissive energy Inova pats. pend. ”. I checked on Inova website and it is a T2 model, has a limited lifetime guarantee.

Do you know how to disassemble it ? The website has no instruction to disassemble.
Thank you very much for showing me.

I don’t think it’s meant to be disassembled.
There is a limited lifetime warranty (I remember it was not cheap), try to contact inova, they seems to still in business even if their catalog was not updated in many years (for example the X1 on 1 AA NiMH is dimmer than a XM-L on moonlight mode)

Does it unscrew on any location you marked?
Have you checked the batteries and switch?

It built like a tank. It was a gift and the cost of sending it for repair may not worth it.
Again thank you for your info.
Regards

There is no screw or any mark on the body to disassemble. The marks I made on the picture were just my guess.
The batteries are new, tested.
How to test the switch of the tailcap ?

You could just bypass the switch with a piece of wire or a paperclip.
Just connect the end of the battery with the tube and see if it lights up.

So you could unscrew anything but the tailcap, right?

File a claim prior to mucking it all up, if ya like :slight_smile:

http://www.inovalight.com/warranty/

Inova and Nite Ize (or however they spell it) merged.

Even if you didn’t pay for it, it was expensive, I can remember it. Try the warranty.

I connected it with a wire and no light up. Probably the Led is dead. It is very little used.
It is questionable about Led manufacturers claim 100,000 hours of use.
Thanks for showing me how to test the led.

Will do.

Thanks for the info.
Regards