How do you store your lithium batteries? Fireproof bags?

Lightbringer · 2019-11-25T17:15:36.000Z

Propeak:

I was wondering whether sealing them in flashlights (even with manual lock-out) or metal tins is more dangerous due to the pressure build-up? Especially if you threw in a few tacks too

Ages ago, probably before I even joined here, I read about someone whose cell went supernova inside a light, and blew out the front glass and reflector, sending shards of glass into his leg/foot before he could toss it.

Odd, as I thought the tailswitch would blow first, being only a glorified rubber balloon on the end.

Anyway, it’s always possible. While it’s extremely rare to have an “incident” as such, it’s pretty much a given that most lights are basically “safe” pipe-bombs with a Li cell inside.

Then again, there are plenty of videos of phones and laptops ballooning and bursting into flames, too. But they’re plastic-walled and don’t send as much shrapnel in all directions like a flashlight or vaping-thing (whatever ya call ’em) can.

Lightbringer · 2019-11-25T17:20:45.000Z

WalkIntoTheLight:

Eventually, they’ll be paper weights. But I hate the idea of a $100 light becoming useless because I didn’t store a couple of $5 batteries for it.

That’s the nice thing about lights that can also take a pair of ’123s. While pricey, chances are they’ll still be around for a while.

And even as Li cells age, capacity will decrease, discharge current will decrease, but plenty of low-stress lights can still use ’em just fine. I use laptop pulls in headlights, ferinstance. They don’t draw more’n 1.5A or so, at least the ones I have, so they should be fine for quite some time.

WalkIntoTheLight · 2019-11-25T17:32:48.000Z

Lightbringer:

That’s the nice thing about lights that can also take a pair of ’123s. While pricey, chances are they’ll still be around for a while.

Yeah, but waaaaaay too costly around here. $12.50 each (plus tax) locally. I’ll just throw out the light.

And even as Li cells age, capacity will decrease, discharge current will decrease, but plenty of low-stress lights can still use ’em just fine. I use laptop pulls in headlights, ferinstance. They don’t draw more’n 1.5A or so, at least the ones I have, so they should be fine for quite some time.

Lithium-ion cells hold up remarkably well over the years. As I’ve mentioned, I still use 10+ year old laptop cells in some lights. I’ll even use them in single-emitter FET lights (like the BLF A6). They’re noticeably dimmer than high-drain cells, but still plenty bright. Probably happily drawing about 3-4 amps. I don’t use them in multi-emitter FET lights, because I’m concerned the light may drain them faster than they’re rated for (only 4.4 amps). The laptop cells still test at 80% of their original capacity, and they weren’t well-treated over those 10 years.

I’ve sometimes used them in a Zebralight SC600w IV Plus, which has a boost-driver and an output of 2300 lumens. It drains at 6-8 amps, and uses regulated output so it sucks harder if the voltage sags. I don’t use them for long, though, as it’s clearly pushing the cell harder than its specs. But, the old cells do still perform.

The myth of “lithium-ion cells lose 20% of their capacity every year in storage” is just false.

pennzy · 2019-11-25T17:39:11.000Z

When the 18650 format is gone, I can’t wait to see the mods going on here.

xevious · 2019-11-25T18:53:35.000Z

toddcshoe:

I still have yet to completely understand the fear of Li-Ion cells. They are in almost everything. The numbers of people hurt or even killed by cells are minuscule in comparison to people being killed and injured by pencils.

I keep all my cells loose in a big empty holiday popcorn tin. When I am feeling like living on the edge, I give it a good shake and hope for the best. My wife calls it my mini Chernobyl.

Exactly. Isn’t the casing of the battery itself part of the protection? I don’t buy cheap, questionable batteries from Chinese sellers. I pay a little more and get cells I trust. Or, I harvest them from battery packs that are OEM (not cheap knock-offs). I don’t keep a VAULT of batteries, as a consumer. I imagine if I was a professional who relied upon them as part of my work, the company would have some special handling. But for the home? Most of my cells are in my lights, with just a handful extra that stay in a drawer where they’re in cases to keep clear of electrical contact. I wouldn’t use more than one 18650 flashlight at a time. If I suddenly discover the charge is low in one light, I’ll borrow the charged batteries from another light in a pinch.

xevious · 2019-11-25T18:55:42.000Z

pennzy:

When the 18650 format is gone, I can’t wait to see the mods going on here.

You really think it’ll be gone sometime in the near future? I think it’s a fantastic size, hand-relative. Just look at the FW3A, one of the smallest lights to house that cell. If chemistry gets better, then the 18650 format will just improve along with it. I could see 18350 becoming more popular in that case, for even greater miniaturization.

pennzy · 2019-11-25T19:10:48.000Z

I foresee whatever industries that use cells to dictate the future. We are only a spin off.

Lightbringer · 2019-11-25T20:02:17.000Z

pennzy:

I foresee whatever industries that use cells to dictate the future. We are only a spin off.

Yeah, we’re “The Lone Gunmen” of the “X Files” franchise…

WalkIntoTheLight · 2019-11-25T20:49:51.000Z

Yup, EV and tool manufacturers are going to determine the cell format of the future. 18650’s for flashlights might stick around for awhile after that, but only from small niche companies that roll their own. No new development or performance improvements.

Flying_Luminosity · 2019-11-25T21:04:13.000Z

I keep mine here

Couchmaster · 2020-05-13T17:13:51.000Z

^ Not sure how you British folks get any bullets out of the end of yer rifles with those yellow thinggys ^ on the ends, but whatever floats yer boats. BTW, lil heads up, if you duck yer heads down just a tad more yer less likely to get it blown off. Seems like batterys would be the least of yer worries.

hank · 2020-05-13T17:35:28.000Z

There is no reason any goes boom or vents if left untouched.

Over the many years I’ve been using rechargeable li-ions, I’ve found two that vented in storage.
No fire, just a brown stain around the positive end and inside the box where I had them stored.

I’ve also found evidence of one leaking while on a charger. These were all years ago, not recent.

I don’t trust them to be reasonable about how they behave. There are a lot of places in China making li-ion cells, using whatever plastic film membrane they have handy to roll up the components.
The quality of the membrane is critical to safety with these cells.

cabfrank · 2020-05-13T18:01:40.000Z

I’ve had two that discharged until dead, while stored. I never did figure out why. I don’t think they vented though.

GregY · 2022-09-28T17:50:42.000Z

Wow this came back?

I only store 18650’s and those go in a hard plastic storage container with 25 separate individual compartments- it’s a repurposed 12ga storage box.
Protects them quite nicely from any physical damage.

texas_shooter · 2022-09-28T18:17:28.000Z

GregY:

Wow this came back?

I only store 18650’s and those go in a hard plastic storage container with 25 separate individual compartments- it’s a repurposed 12ga storage box.
Protects them quite nicely from any physical damage.

WOW, same here. Some will also store the 21700 but the MTM 12ga won’t with it’s anti-rattle ribs.

GregY · 2022-09-28T18:32:59.000Z

texas shooter:

GregY:

Wow this came back?

I only store 18650’s and those go in a hard plastic storage container with 25 separate individual compartments- it’s a repurposed 12ga storage box.
Protects them quite nicely from any physical damage.

WOW, same here. Some will also store the 21700 but the MTM 12ga won’t with it’s anti-rattle ribs.

Definitely more people who do it because I stole the idea from somewhere.

I only store nimh in these sizes instead of any type of lithium, but storage boxes for .500/.460mag work well for AA/14500 and storage boxes for .44/.41mag work well for AAA/10450.
Have to keep my eneloops organized.

bobvoeh · 2022-09-28T20:25:34.000Z

I got this idea from somewhere here on BLF. Lipstick holder from The Container Store. Works great for 18650 and 21700 batteries.

CollectEverything · 2022-09-28T20:39:03.000Z

I keep mine in the closet with my spare toilet paper, paper towels, and printing paper!

lcortez321 · 2022-09-29T03:23:59.000Z

I store my cells in the same container as I do my other Lipo batteries, for my RC cars. I put them inside their plastic container and then put them in a metal ammo case. I remove the rubber o-ring that holds the ammo can sealed. To prevent any possible explosion from gasses, and, or, fire. In case any cells go kaboom. you can buy the metal storage case on amazon. that’s where I got mine.

Venom · 2022-09-29T13:00:47.000Z

bobvoeh:

I got this idea from somewhere here on BLF. Lipstick holder from The Container Store. Works great for 18650 and 21700 batteries.

I find ammo cases work better. Plus the cells stay inside the container.