LaserLight SMD by SLD Laser

Lothar · 2020-02-12T14:19:20.000Z

Any update on this?

~~What does the luminance of 1000Mcd/m^2 mean and how does that compare to kcd readings we use for flashlights?~~
So with CULNM1.TG coming close to 350cd/mm^2 without a collar, is it safe to assume that this LaserLight SMD would have close to 3x the luminance of a bare CULNM1.TG, and 1.5x the luminance of a CULNM1.TG with RLT collar?

Here is an article stating they’ve already managed 1000 lumens from the same SMD, equating to 1530 Mcd/m^2.

Agro · 2020-02-12T14:25:21.000Z

Lothar:

Any update on this?

~~What does the luminance of 1000Mcd/m^2 mean and how does that compare to kcd readings we use for flashlights?~~
So with CULNM1.TG coming close to 350cd/mm^2 without a collar, is it safe to assume that this LaserLight SMD would have close to 3x the luminance of a bare CULNM1.TG, and 1.5x the luminance of a CULNM1.TG with RLT collar?

It certainly looks so.

djozz · 2020-02-12T14:26:04.000Z

It seems so, if this ever becomes affordable, the future of flashoholics looks bright once more.

grin · 2020-02-12T21:56:29.000Z

Think I might have to get one

Lothar · 2020-03-11T10:58:38.000Z

Has anyone been able to contact either Lasercomponents or LaserLight? I’ve tried all the email addresses I could find, but no-one is responding.

djozz · 2020-03-11T11:05:04.000Z

Lothar:

Has anyone been able to contact either Lasercomponents or LaserLight? I’ve tried all the email addresses I could find, but no-one is responding.

I had a reply from Lasercomponents recently, no way that they are selling to individuals. Last year I asked directly to SLD lasers and I could buy a sample for 250 dollar if I signed a non-disclosure agreement, which is rather pointless to me as a BLF member who likes to share my findings over here.

Lothar · 2020-03-11T11:41:14.000Z

So what do we flashaholics have to do if we want to get a LEP SMD for our extreme thrower projects?

Isn’t there someone here on the forum that wants to use their knowledge and connections to do a group buy

djozz · 2020-03-11T11:50:00.000Z

It does not sound like a group buy would be feasible in the light of the answer that I got (I think it is alright if I make it public since there is not any specific content in his reply) :

Dear Mr. *,

Thank you for your inquiry and your interest in our products.
First, we do soll exclusively to companies.
Second, the price per piece is 250,- Euro and so preferred for industrial use.

Best regards,
Stephan Krauß
Produktingenieur
Geschäftsbereich Optosysteme
LASER COMPONENTS GmbH

But maybe you are lucky in a direct inquiry at SLD Lasers

Theodore41 · 2020-03-11T12:51:30.000Z

I have a 5W Sanwu blue laser and it is very good.

Lothar · 2020-03-11T12:54:40.000Z

I’ll keep an eye on this development: Acebeam W40 and W50

SlaytheIncubus · 2020-04-25T01:06:37.000Z

2 of them for $620 or 4 of them for $1,000. No NDA. No restrictions. You own it. Plus the electronics to drive it. Anybody interested???

grin · 2020-04-25T02:53:52.000Z

I would be interested in 1 perhaps 2

djozz · 2020-04-25T11:47:34.000Z

Cool, but too much money for my budget. Where do you source them?

grin · 2020-04-25T12:08:57.000Z

It is a lot of coin. But i would like to put one in the 900mm recoil and I have a 200mm and a 150mm PCX lens. the chunk of aluminium I need will put materials and lens over $1k so might as well go the whole hog.

Lothar · 2020-04-28T08:32:36.000Z

SlaytheIncubus:

2 of them for $620 or 4 of them for $1,000. No NDA. No restrictions. You own it. Plus the electronics to drive it. Anybody interested???

Hi, do you have some real world tests? How do these SMD’s compare to the LEP modules in W30, etc in terms of luminance and thermals?

grin:

It is a lot of coin. But i would like to put one in the 900mm recoil and I have a 200mm and a 150mm PCX lens. the chunk of aluminium I need will put materials and lens over $1k so might as well go the whole hog.

Grin, would you be able to test this SMD compared to a W30 module please?

LEPzoom · 2023-09-03T03:25:39.213Z

The new SMD available now for ordering at this site: https://www.digikey.com/en/products/detail/kyocera-sld-laser/910-00010-WF/16028313
1000 lumen, higher than any other retailed LEP’s spec.
Not sure if it has the optional MCPCB like other lower end modules here:
https://www.digikey.com/en/videos/k/kyocera-corporation/sld-laser-laserlight-skybeam

$175 per unit, $168 per unit if >= 50 order ( group buy ? )

TUIG101 · 2023-09-03T13:00:22.064Z

Nichia also have something similar, not for sale yet, they call it the “GigaWhite™ Gen2” and it’s mentioned here on the bottom of the page as an alternative for the automotive line. LES is rectangular though.

SammysHP · 2023-09-03T13:55:22.274Z

There was a build and some experimentation with this LEP at tlf:

Taschenlampen Forum

Umbau Litfaßsäule auf Osram 420/1

dommii hatte eine Kyocera SMD 1000 LEP bekommen (und sehr gute Nahaufnahmen gemacht). Auch die Südfraktion hat zwei ergattert und konnte mittlerweile eine verbauen. Ulkig, der Kupferstar vom Auflöten des Emitters etwas angelaufen? Bei ganz...

LEPzoom · 2023-09-04T01:02:03.654Z

Here’s the one with the star shape copper plate at the back for easy install:
https://www.digikey.com/en/products/detail/kyocera-sld-laser/910-00011-IT/16028292

In the forum mentioned in above reply, multiple drivers has been planned and tested (XHP35 drivers ?). Not sure what’s the final driver being used. Some of XHP35 drivers go up to 12v. Data sheet requirement of the LasserLight SMD is 8.3v (max 9v), 1A to 2.5A. Anyone has suggestion for such driver ? Thanks.

LEPzoom · 2023-09-04T15:19:55.031Z

Just found that the company has made a flashlight with LaserLight SMD available at Walmart $269:
https://www.walmart.com/ip/Bushnell-Long-Range-Flashlight-with-SLD-LaserLight-Technology/2181192040
Not sure it’s using the latest SMD at kyocera sld 's website. But it’s 1000 lumens.

Beam distance is only 1100 meter, 308K peak Candela. I am a little disappoint comparing it to other 1M cd or 2.xM cd LEPs with 500lm - 600lm.