[M4Ddeal active] : Lumintop GT Mini - 2 authorized deals

BlueSwordM · 2018-09-01T00:30:04.000Z

For most people, 4000k is not what they expect when they see Neutral White, they are rather expecting 5000k, which is commonly referred to as neutral white.

This is why on their page, Lumintop states that there are two choices of color temp: CW, or 6000-6500k, or Natural White, around 4000k.

gleamer · 2018-09-01T17:13:11.000Z

Got it guys, thanks for the feed back. So I got the NW, yes it is rosier than my Q8. Im still learning thise tint numbers

gleamer · 2018-09-01T17:15:14.000Z

Thanks for the group buy Max

mortuus · 2018-09-01T17:38:11.000Z

BlueSwordM:

For most people, 4000k is not what they expect when they see Neutral White, they are rather expecting 5000k, which is commonly referred to as neutral white.

This is why on their page, Lumintop states that there are two choices of color temp: CW, or 6000-6500k, or Natural White, around 4000k.

ah u are right sry i didnt pay much attention really, yes compared to the q8 its a bit warmer tint, maybe too warm too call it neutral but it doesnt bother me.

teacher · 2018-09-03T07:42:52.000Z

mortuus:

BlueSwordM:

For most people, 4000k is not what they expect when they see Neutral White, they are rather expecting 5000k, which is commonly referred to as neutral white.

This is why on their page, Lumintop states that there are two choices of color temp: CW, or 6000-6500k, or Natural White, around 4000k.

ah u are right sry i didnt pay much attention really, yes compared to the q8 its a bit warmer tint, maybe too warm too call it neutral but it doesnt bother me.

Totally agree BSM, 5000K is much closer to Neutral White than 4000K is.

Well said also mortuus, 4000K is much “too warm too call it neutral”. :+1:

Delta_V · 2018-09-05T00:19:46.000Z

Finally! And in one piece, lol. The LED isn’t quite perfectly centered, but doesn’t seem to affect the beam. Kinda disappointed in the diffuser, to be honest. It’s too loose to be used for anything except tailstanding. Otherwise, it’s extremely impressive. Shocked how much shorter it is than a C8.

teacher · 2018-09-05T00:31:08.000Z

Delta_V:

Finally! And in one piece, lol. The LED isn’t quite perfectly centered, but doesn’t seem to affect the beam. Kinda disappointed in the diffuser, to be honest. It’s too loose to be used for anything except tailstanding. Otherwise, it’s extremely impressive. Shocked how much shorter it is than a C8.

Congrats Delta_V!!! Glad yours finally showed up…… :+1:

Coyotehawk · 2018-09-05T02:01:20.000Z

Delta_V:

Kinda disappointed in the diffuser, to be honest. It’s too loose to be used for anything except tailstanding.

How many others have the same issue with the diffuser? I emailed Max just tonight about the exact same issue. Two minis and two diffusers and neither can be used for anything but being used as a lamp with the light tail standing.

shirnask · 2018-09-05T02:05:16.000Z

/\ SAME

teacher · 2018-09-05T04:51:10.000Z

/\ . Same with my diffuser.

M4D_M4X · 2018-09-05T05:16:40.000Z

Hey

mine is also on the loose side.

you can always contact Neal@m4dm4x.com

mortuus · 2018-09-05T07:50:54.000Z

Great u got the light Delta, the led isnt perfect no but that doesnt bother anyone i think.

d_t_a · 2018-09-05T08:18:40.000Z

Coyotehawk:

How many others have the same issue with the diffuser? I emailed Max just tonight about the exact same issue. Two minis and two diffusers and neither can be used for anything but being used as a lamp with the light tail standing.

Got my GT Mini with the diffuser from Neal too. Yup, the diffuser is a bit loose on the GT Mini (diffuser will generally fall off when GT Mini held upside down). however, the said diffuser fits quite snugly on the ROT66, so I’m using the diffuser with the ROT66 now…

JasonWW · 2018-09-05T08:35:17.000Z

I don’t have the diffuser, but maybe you guys could get a tighter fit if you put a piece of tape around the bottom, inside edge where it slides onto the light.

Delta_V · 2018-09-05T15:12:33.000Z

IDK, I don’t think a piece of tape would be enough. I’m not home right now, but from what I remember, if the Mini GT has an outer diameter of 50mm, the diffuser had an ID of 52-54mm. There was definitely several mm of play between the two. Would almost need a thin strip of rubber or something.

shirnask · 2018-09-05T15:58:13.000Z

Yes I tried tape - it’s not enough

Coyotehawk · 2018-09-19T03:59:04.000Z

I emailed Neil about a couple issues, including the diffuser, and am awaiting his response. I’ll let y’all know what he says when I hear from him.

In the meantime, anyone figured out a good way to secure the diffusers?

bhstinger · 2018-10-01T21:52:10.000Z

Enjoying my NW & CW GT Mini lights.

Didn’t order a diffuser but might I suggest you heat up the diffuser (slowly) with a heat gun and then deform it into a more oval shape (near the opening).
This is dependent on type of plastic of course, but it may work to keep them on better.

RobertB · 2018-10-01T22:42:03.000Z

Delta_V:

IDK, I don’t think a piece of tape would be enough. I’m not home right now, but from what I remember, if the Mini GT has an outer diameter of 50mm, the diffuser had an ID of 52-54mm. There was definitely several mm of play between the two. Would almost need a thin strip of rubber or something.

Get yourself a hose clamp that will fit around the diffuser. put the diffuser on the flashlight head, put the hose clamp on and tighten it up snug. Hit it with a heat gun, and let it cool back off

DavidEF · 2018-10-05T23:11:26.000Z

RobertB:

Delta_V:

IDK, I don’t think a piece of tape would be enough. I’m not home right now, but from what I remember, if the Mini GT has an outer diameter of 50mm, the diffuser had an ID of 52-54mm. There was definitely several mm of play between the two. Would almost need a thin strip of rubber or something.

Get yourself a hose clamp that will fit around the diffuser. put the diffuser on the flashlight head, put the hose clamp on and tighten it up snug. Hit it with a heat gun, and let it cool back off

Or, for an even tighter fit, find something that’s just a bit smaller diameter - by a half millimeter or even a full millimeter smaller. Tighten it around that object and heat it up. Then, it should maintain a tighter fit when it cools and you put it on your GT Mini.