Mateminco SO3 "Copperhead" (Astrolux S43S) photos + purchase link in op

tatasal · 2018-10-27T08:32:56.000Z

And now, comparing the beam, tint between the BLF A6 (NW) and the Mateminco SO3 Copper-head Nichia 219C (Astrolux S43S):

Remember: The A6 is a BLF members’ project so it’s not a easy light to surpass!

Control Shot:

BLF A6 (nw):

Mateminco SO3 Nichia219c:

BLF A6 (LEFT) , Mateminco SO3 Nichia 219c

nokoff · 2018-10-27T13:27:16.000Z

Thanks for the photos! I like the inclusion of finger rests /scallops. …and that it comes with both tubes.

I hope they list it soon for preorder.

Would you mind a photo of the M lit up?

tatasal · 2018-10-27T20:34:47.000Z

nokoff:

Thanks for the photos! I like the inclusion of finger rests /scallops. …and that it comes with both tubes.

I hope they list it soon for preorder.

Would you mind a photo of the M lit up?

Sure, here we go:

nokoff · 2018-10-27T23:17:10.000Z

I thought I saw a pic where just the M lit up. I must be mistaken. Thank you!

tatasal · 2018-11-07T12:15:27.000Z

nokoff:

I thought I saw a pic where just the M lit up. I must be mistaken. Thank you!

You’re welcome…actually, initially, I hesitated getting this light type of light, design-wise, at first, being a combination black ano AND copper….in all honesty I find this design at first, well, weird compared to my all usual black or gray or Ti lights.

But, what the heck, I might as well try this…and I am pleasantly surprised to see it actually looks, and feels, very refreshingly nice!

You’ve got to have one to in your hand to understand what I’m imparting.

tatasal · 2018-11-07T11:44:48.000Z

For size comparison using the 18350 tube:

Nitecore EA11 (AA/14500) - SO3 - Klarus Mi7Ti (AA/14500):

Additional photos:

FYI: Mateminco always use the Samsung INR18650-30Q Flat Top as their test cell (meaning even flat top works in their models with anti-reverse polarity protection)

tatasal · 2018-11-07T11:51:18.000Z

nokoff:

Thanks for the photos! I like the inclusion of finger rests /scallops. …

The finger rests/scallops is only available in this SO3 Mateminco version, while the S43S Astrolux version only the plain smooth tube for 18650 cell.

nokoff · 2018-11-07T12:09:54.000Z

Cool can’t wait. I asked freeme and he said they’re not exporting these to the West just yet but he will let us know when.

duramax · 2018-11-07T14:25:45.000Z

this model looks better with the copper head, thanks for the shots!

tatasal · 2018-11-09T09:43:39.000Z

Guys, if you like this light with Neal’s special pricing, just send him a pm to this link: NEAL SO3

or to his email: Nealsgadgets@hotmail.com

:+1:

tatasal · 2018-11-08T12:48:28.000Z

nokoff:

Cool can’t wait. I asked freeme and he said they’re not exporting these to the West just yet but he will let us know when.

Sure you can order, just see post above this post !

joechina · 2018-11-08T14:13:47.000Z

nokoff:

Cool can’t wait. I asked freeme and he said they’re not exporting these to the West just yet but he will let us know when.

Uh, so I got a Unicorn

with flatt bezel and flat big tube.
Thank you to Mateminco

timbo114 · 2018-11-24T23:08:16.000Z

Got mine today.
1st use with fresh Sanyo NCR18650GA, ran turbo in the darkness when I took my dog outside.
After stepdown, temp was so hot could barely hold it. … shut it off and saw an orange glow in the head WTF?

I watched the orange glow fade, then took bezel off to investigate.

Optic was melted by a loose screw arcing near the burnt PCB hole in the head.

The threads of the screw were laying stuck on the burnt mark as seen in photo #2

joechina · 2018-11-24T12:51:18.000Z

That doesn’t look nice.
Hope you get a replacement

timbo114 · 2018-11-24T23:09:11.000Z

joechina:

That doesn’t look nice.
Hope you get a replacement

I’m told a replacement head will be sent.

nokoff · 2018-11-25T00:42:58.000Z

timbo114:

joechina:

That doesn’t look nice.
Hope you get a replacement

I’m told a replacement head will be sent.

You must’ve had it on for maybe 30 seconds? Whom did you buy it from?

Jason_casad · 2019-03-23T07:43:36.000Z

Hello , Im new here but recently bought the os3 and love it but am wondering if there’s a way to shut the green light off while the lights not on?

JasonWW · 2019-03-23T08:07:09.000Z

Jason_casad:

Hello , Im new here but recently bought the os3 and love it but am wondering if there’s a way to shut the green light off while the lights not on?

Do you mean permanently?

Here is an excerpt from the manual.

Additional UI settings are available to control the button back-light. While in the battery check mode (accessible with 3 fast clicks), press&hold the button. A double flash followed by a single blink is again the prompt for the first setting:

1. Button LED on while GTmini OFF

1: Disable 2: Enable [default]

2. Battery level blinks on button LED only

1: Disable [default] 2: Enable

3. Button LED

1: Disable 2: Enable [default]

So what you want to do is 3 fast clicks, it will blink the battery voltage, then press/hold the button. It will do 2 fast, 1 slow blink. Then 2 fast, 2 slow blinks. Then 2 fast, 3 slow blinks. Here you have maybe 2 seconds to click the button once. The main beam should blink when you do it. Then just let it finish. I’m not sure what it will do. Maybe 4 fast blinks. Anyway, once it’s not doing anything, try turning the light on and see if the button light is now off.

JasonWW · 2019-03-23T08:09:56.000Z

Personally, I prefer to have the button light on. It let’s me know battery power is connected. I will turn the tail cap a half turn to cut power. I see the button light turn off. Now it can sit on the shelf with no battery drain.

Blades · 2019-09-26T01:14:06.000Z

I just purchased one of these and am looking forward to testing(playing) with it. I’m hoping I can use it for work.