Measurements of the ts10 mcpcb

Flashlight Modding and DIY Parts
1

Hi guys.
I have seen mods here where a different mcpcb is used in the ts10 with 3 519a emitters. However These mods also use a different optic. I would like to Design a different mcpcb for the ts 10 which keeps the emitters in the original place but uses different emitters, eg. 519a.
Can someone give me measurements of the mcpcb?
Also a simple schematich would be appreciated for how exactly the aux LEDs are configured.

Thanks for your help.

2

MasterNate and Zwerglein02 have designed TS10 mcpcb for 3535 LEDs. Zwerglein02 made some for 5050 also.

Screen Shot 2024-06-02 at 9.14.50 AM
Screen Shot 2024-06-02 at 9.14.50 AM1158×846 52.9 KB

The Nichia LEDs make those two TS10 personal favorites…

3

Here is a link to my PCBs. Maybe you can use these for a template. Or just get them printed and use them.

https://www.reddit.com/r/flashlight/s/1bhC458K0Z

1 Thank
4

Thanks for that. Aparently i Was not the only one with that Idea.

5

I think this should help :wink:

image
image1043×845 209 KB

2 Thanks
6

Thanks, I already sent you a DM on reddit.

1 Thank
7

AFIK they all use the stock optic.