MF01 Mini / MT07- Mod/Upgrade - Copper Heatsink Cover Plate

ftumch33 · 2021-01-02T18:58:00.000Z

I know I`m tardy to the party but if there`s another list going for those interested I`d be down for 2.

Notmyrealname · 2021-01-03T02:07:31.000Z

And 1 here even if the shipping will be ridiculous. Has anyone tried to get the brass plate from Mateminco? Sorry if this has already been covered in the thread.

aliraqy · 2021-01-10T01:28:59.000Z

Interested in two (London)

gchart · 2021-01-10T01:34:04.000Z

Ok, at this point I think there’s been at least 7 pieces requested. Maybe I need to check into doing another batch. Let me check on pricing again.

FireFux · 2021-01-13T15:04:37.000Z

Hello!

~~I’m also interested in two~~.

Edit: I received my Mateminco and there was a heatsink already mounted. So i do not need it anymore.

gchart · 2021-01-10T21:03:59.000Z

Ok, just keep in mind that shipping from the US is like $13-14. Last time I did this, a member in the EU volunteered to receive a bulk shipment and split it out to reduce shipping costs. Maybe something like that can be arranged again.

I’m pretty sure I’ll do another batch so if anyone is interested and hasn’t spoken up yet, please do so now so I can order the correct amount.

gchart · 2021-01-11T16:58:03.000Z

I just checked with the place I ordered these from before and now the price is almost double. I sent the design to a couple more places for quoting.

mightyfine · 2021-01-11T20:00:03.000Z

Thanks for the update and running around

sungsmith · 2021-01-12T05:29:39.000Z

Interested in 1

Bobalouie · 2021-01-13T00:36:51.000Z

I’ would like one

tantrik77 · 2021-01-26T05:09:16.000Z

Depending on price and shipping, I would like 2 please. Thank you.

Purple_Fire · 2021-03-08T22:55:39.000Z

I am very interested and would like to buy one.

brightnorm · 2021-03-26T05:02:31.000Z

I am very interested in 1, just sent you a PM.

I’m continuing (possibly futile) attempts to at least partially work around the sudden drop from turbo. Tonight’s experience was a bit puzzling. Using a timer and a fully charged Shockli 5500 I clicked “full” turbo and waited. After 1 minute there was no apparent dimming. After 1:50 minutes I thought perhaps there had been slight dimming, though I wasn’t sure. I double clicked and there was full turbo again, but the difference was relatively small.

So, instead of a nearly immediate very noticeable drop there was (to the eye) a barely perceptible dimming after almost 2 minutes run. Why hadn’t the sudden drop occurred? Does using fully charged batteries affect the results? I’m assuming this was a fluke and I was just lucky.

I’ll continue with these attempts later.

gchart · 2021-03-24T19:28:34.000Z

Sorry, brightnorm… all of these were gone a long time ago. I have checked several times about buying more, but the manufacturing costs have increased considerably. To the point that each heatsink kit would probably cost $25 + shipping if not more. And that’s assuming an order quantity of 20 or so. If I could get them made for what I bought them previously, I’d gladly organize another batch.

brightnorm · 2021-03-24T19:45:41.000Z

OK, thanks.

zoulas · 2021-03-27T10:55:49.000Z

Does the standard MF01S (not the MINI) have the issue of plastic vs copper plate?

Th558 · 2021-03-27T11:57:02.000Z

zoulas:

Does the standard MF01S (not the MINI) have the issue of plastic vs copper plate?

It doesn’t not have this issue as it doesn’t have 7135 chips. The MF01 mini now comes with a brass plate so it no longer has the stepdown issue.

zoulas · 2021-03-27T13:39:55.000Z

Th558:

zoulas:

Does the standard MF01S (not the MINI) have the issue of plastic vs copper plate?

It doesn’t not have this issue as it doesn’t have 7135 chips. The MF01 mini now comes with a brass plate so it no longer has the stepdown issue.

Cool, thanks

brightnorm · 2021-04-01T11:20:58.000Z

[quote=Th558]

zoulas:

…The MF01 mini now comes with a brass plate so it no longer has the stepdown issue.

Vinh hasn’t seen those. Do you know who sells them?

Mandrake50 · 2022-03-19T21:30:14.000Z

Deleted.
I checked and both of mine have the brass plate.