MF01S Reset

Edge · 2019-11-09T19:28:30.000Z

Last seen: 1 min 16 sec ago
Joined: 11/09/2019 - 00:28
Posts: 1
Is there a way to reset to factory?
The hold button while putting tail cap back on, nor the 13 click method work…

texas_shooter · 2019-11-09T19:41:00.000Z

If it’s as the MF01 Mini. Turn on light then loosen tail cap until light goes out. Then press switch and tighten tail cap. Light will blink then go out, it’s now reset to factory default.

Edge · 2019-11-09T19:52:35.000Z

texas shooter:

If it’s as the MF01 Mini. Turn on light then loosen tail cap until light goes out. Then press switch and tighten tail cap. Light will blink then go out, it’s now reset to factory default.

Thanks a ton!!

CR888 · 2021-05-29T11:18:17.000Z

Thanks I just did this to my full size MF01S & it fixed my light. Only a few functions were working, something was clearly wrong, it was going on/off etc. Did this reset & it’s like new! I thought there was a reset proceedure yet it’s not mentioned in the large instructions. But it is here on BLF…