What’s up with the 380mah 7135’s? Did they sell out that fast, or did you realize that you should probably save them for the lights you build?
Ordered a DD from you for a mag d build. We’ll see how it does.
No, they sold out that fast!
The new DRY driver looks like it has two MOSFETs... I don't know the specs on them but I'm guessing it should be capable of some decent current passthrough.
Looks like RMM is going to be a busy man for a while.
Richard when you get caught up PM me about the driver firmware and de-domed XP-G2
Thanks
John
A note of thanks for the super quick ship on my recent order (347)… it’s a pleasure to not have to worry about overseas batteries.
Too busy! So the new DRY driver isn't what's in the new BTU Shockers, which still have the older DRY driver. The new one is a much larger diameter board than the old one but it looks like it will perform better. I am not quite sure yet what the best way to get this into the light is without permanently enlarging the driver cavity.
Also, the XTAR 4.35v chargers have shipped! Since I can't offer discounted prices, there will be some bundle deals with these chargers. For example: Buy an XTAR XP4 with any lithium ion cell get $10 off your total order.
Doh! I probably should have made measurements before ordering :( Might have to fire up the lathe then.
If I hadn't sold out already I would run some tests... but the board has a fairly large toroid and two decent sized MOSFETs. Seems like a complete redesign from the older version, but I'm not quite sure why they did that if they're not using it in the BTU? Surely they don't sell a ton of DRY drivers, maybe they're just waiting for the old stock to run out.
Nice. :bigsmile:
What's the current output on the 4.35v YiboYuan AC-02 charger you are selling?
Thanks!
-Garry
350 mA. I generally use them to top off the cells after being charged to 4.2v in another charger but they will charge a discharged cell overnight.
Thanks for the quick response. I was really hoping for a fast one, but they seem so hard to find!
-Garry
Which one of the S3, S2 and S6 hosts has the deepest reflector?
Also which one between C8 and M1 has the deepest one?
The S3 reflector is 11.6 mm deep and the S2 is 17.5mm deep.
The C8 reflector is 31.9mm deep and the M1 is 23.04 mm deep.
Fast Tech has a 20mm deep smooth reflector for S2, S5, S6, S7, S8 but it takes up more room so some 18650 batteries might not fit. I have a S2 with the 20mm deep reflector and it will fit the Panasonic unprotected flat top and button batteries no problem.
Hope this helps.
As promised, there are going to be some promotional rebates going on this week, from 1/25/14 until 2/1/14.
Here are the offers:
- Buy either the XTAR MC0 or MC1 together with any battery sold on the website and receive a $1 rebate
- Buy either the XTAR XP4 or VP1 together with any battery sold on the website and receive a $8 rebate
- Buy the XTAR WP2s together with any battery sold on the website and receive a $6 rebate
The rebate will be given as a cash refund to your PayPal account after the order is completed at the time the order ships.
Built the first S2 XP-G2 triple last night, using the aluminum spacer I had machined. Everything went together perfectly and it is a nice light! Not quite as short or lightweight as the S3 or S6 shorty (upcoming), but still a very nice light. When the batch gets finished the spacer will sell for $6, with the complete light selling for $49.50.

Also, I polished the top of a frosted 10508 last night and it really changes the beam pattern! It makes it very similar to a 10511. If the same thing holds true for the 10511 it should be the tightest hotspot yet when polished.
Can you tell me off the top of your head when you expect to get some more Qlite drivers? Just killed a light that I’ll have to totally rebuild, and I’m out of drivers. And 380 binned chips. And energy. Night all! ![]()
Sometime this next week! I have lots on the way and they have already shipped via DHL. I hate running out of drivers!
A few quick updates:
- XTAR VP2 and SP1 are being delivered today! These are the sweet new chargers that can charge the LiFePo, 4.2v, and 4.35v sale.
A few NEW cells:
- Unprotected Button Top Samsung 20R - 18650
- Unprotected Button Top King Kong - 26650
- Unprotected Button Top LG D1 4.35v - 18650
- Unprotected Flat Top LG E1 4.35v - 18650
- Unprotected Button Top LG E1 4.35v - 18650