My modest collection

P33 · 2018-12-09T21:17:15.000Z

Only just noticed this thread. Really nice comprehensive list of your lights. I do appreciate the selection as well, very sensible choices.

Could you tell me a bit more about XHP70.2 and MT-G2? What is the real life difference and how bad tint on XHP actually is?

komeko · 2018-12-09T21:24:41.000Z

XHP70.2 has a large tint outside the center. It goes in the yellow direction. I tried three different LEDs and each was terrible. MT-G2 is much more equal. The color is more uniform. As for TC20, I’m going to make one more modification. It will be 4x XP-L HI placed in the center. I think I like this version the most. When I do mod, I will describe the experience.

P33 · 2018-12-09T21:42:14.000Z

I’m waiting about the upcoming Sofirn SP70 or modified Convoy L6 and I’ve read several times about how superior MT-G2 is. How much light do you loose comparing to XHP70.2?

komeko · 2018-12-09T21:45:56.000Z

3854 in XHP70.2
2563 in MT-G2

I am currently waiting for PL47 and TN40s

chadvone · 2018-12-09T21:53:49.000Z

Nice lights, your slowly leaving modest ville.

P33 · 2018-12-09T21:57:07.000Z

That’s not too dramatic. Will give stock SP70 a go probably and change to MT-G2 if I’ll be that bad.

And you’ll be happy with PL47, it’s got amazing tint and surprisingly good throw for the size of the optics. I’m waiting for your measurements though!

komeko · 2018-12-09T22:49:12.000Z

If you want MT-G2, please let me know
After changing to 4xXP-L HI I will not need it.

AguassissiM · 2018-12-09T23:41:36.000Z

An awesome tread komeko, such well put together collection.
My guess is that you have a flashlight for any occasion.
Makes me wish that I read it sooner than some of my choices would have been different.
Well done. Thank you for sharing.

komeko · 2018-12-12T15:47:34.000Z

An unusual lamp joined the family. Interesting in terms of appearance, power supply 21700 and used LEDs SST-20.

komeko · 2018-12-28T21:50:39.000Z

Today my D4 has undergone another modification. It was already XP-G2, 219CT, XP-L HD. Now I’m HP-L HI 3A and finally I’m happy. This is it. This is how it looks:

Duv 0,0001

komeko · 2019-01-25T15:25:54.000Z

Some changes in my collection. Thrunite TN40S and Zebralight SC600W HI MK4 joined the family. Utorch UT02 changed the owner, because I have Catapult V6 so UT02 was unnecessary. SDmini is waiting for a new driver and TC20 for a new PCB with 4xXP-L HI.

Although the shade is a bit above the BBL, I still like the color.

komeko · 2019-02-07T18:05:44.000Z

After replacing the driver:

Pavlo · 2019-02-23T05:42:39.000Z

Really enjoyed reading through this thread. Great photos.

Badman400 · 2019-03-02T02:05:20.000Z

Excellent information and photos! I have 2 each of the TC20 and Catapult V6 unmodded. I just received the Emisar D4S today. So far, so good.

komeko · 2019-03-02T07:08:33.000Z

I am currently waiting for Zebralight H600Fw MK4.

komeko · 2019-03-14T16:18:03.000Z

And it arrived, H600Fw MK4.
It is a super complement to the SC600W HI. The color is almost the same, the performance also. Only the clip is poor. I like the torch in general.

Of course, I’ve already done the right measurements:

Next in the queue will be SC64w HI and I think I will be tempted by the new D18 Emisar

komeko · 2019-03-14T22:53:37.000Z

Such a small summary:

komeko · 2019-03-16T14:02:05.000Z

In anticipation of Emisar D18, I ordered Zebralight SC64w HI. This will be my complement to the Zebr set.

komeko · 2019-03-28T18:21:45.000Z

My new acquisition in the collection, Zebralight SC64w HI. It’s really great.

komeko · 2019-04-27T08:14:07.000Z

The collection was joined by Emisar D18.
I will say briefly, I like it very much.
Turbo withstands 30 seconds. When setting the temperature threshold to max, after 6 minutes I was able to warm it up to the temperature of 75 degrees Celsius. Beam profile similar to M43, looks reminiscent of a bejspol stick