Ever since I registered with digikey it requires me to go to the digikey.dk site. This would be fine if I could at least still have permission to see the digikey.com site but I can not anymore. So I cannot see the shopping carts for the various driver project that Comfychair and others have compiled.
I would be grateful if you could post up the digikey part no´s and the quantity for the following drivers:
BLF17DD
SRKnanjgMosfet
Thank´s a bunch
search on both parts returns 0 results. at DK.com
Same exact thing happened to me with the mouser site, it forces me to the Italian site after I registered when placing my first order and actually blocks me from the US site. Good luck.
Can’t copy and paste
Index Quantity Image Part Number Description Customer Reference Available Quantity Backorder Quantity Unit Price Extended Price
1
ATTINY13A-SSU-ND IC MCU 8BIT 1KB FLASH 8SOIC
10
Immediate 0
1.09900 $10.99
2
ZLLS410CT-ND DIODE SCHOTTKY 10V 0.57A SOD323
10
Immediate 0
0.41200 $4.12
3
RMCF0805FT19K1CT-ND RES 19.1K OHM 1/8W 1% 0805
20
Immediate 0
0.02900 $0.58
4
RMCF0805FT4K70CT-ND RES 4.7K OHM 1/8W 1% 0805
10
Immediate 0
0.02900 $0.29
5
1276-2872-1-ND CAP CER 10UF 16V 10% X7R 0805
10
Immediate 0
0.24700 $2.47
6
RMCF0805FT130RCT-ND RES 130 OHM 1/8W 1% 0805
10
Immediate 0
0.02900 $0.29
Would it be possible to use the links provided to fill your cart and login after that?
Here’s a screenshot of the cart page. It does not include the FET.
Have you tried clearing your browser history and cookies? It can be done on iDevices as well, through the Settings app. Under safari settings, there should be an option to clear history and such.
@ rbd : Unfortunately no. I tried a million times to circumvent it :-(
@ rbd & Warhawk : Thank you :-)
@ rollingstone157: Yes i tried it but somehow the site realise I am in europe almost immediately. Maybe I should do a thorough cleanup to get it done..
Tried going through a proxy server?
The FET part number for digikey is 785-1481-1-ND. Price is $0.86.
EDIT: See comfychair's post below.
AOD510 is still untested - or, rather, it hasn't been made to work on the 17/20DD yet. I tried it as a direct swap for the Vishay 70N02 using the same gate/pulldown resistors, and it didn't work. It might just need different resistors or tweaked firmware but I didn't get to any of that, I was looking solely for a direct replacement for the 70N02s.
Thanks, you may have saved a couple of us a little money, and probably a lot of frustration. I'll stick with the 70N02 then.
Farnell offers IRLR8721PBF as a direct replacement for 70N02…
Soo- maybe resistor change or code change... That will be interesting since that is the one i bought.... Well it certainly seems like I jumped into the deep end :-)
I thought the Vishay 70N02, Rds-On was way low, like less than 4mOhm
If that works, the price on Mouser is decent for quantities >=10. Digikey wants a 900 unit minimum order.
Yeah, gotta make sure you go “cut tape” option when searching, otherwise they try to sell you a whole dang roll 
That is where the CT in the part number comes from I believe
IRLR8721TRPBF CT -ND
Yup
Tape & Reel, Cut Tape and Digi-Reels are all derived from the same manufacturer’s part number. Inventory from Tape & Reel is used to fulfill Cut Tape and Digi-Reel orders and will impact the total quantity available.
Tape and reel part number is IRLR8721TRPBF TR -ND
Thanks you two. My Google-fu failed me.