Need a new pair of flush cut pliers (Found and Bought)

So, looking for a quality set of flush cut pliers. Brands recommended and sources of supply appreciated. The old pair of Radio Shack pliers are worn out, and just not doing the job anymore.

At work I use the flush snips from the Crescent set at Home Depot. Sorry, no link. They come in a 2-pack with a pair of small flat-nosed pliers. I am happy with those. I’ve purchased two of these sets a few years apart (when I changed jobs I bought another set for the new office). They looked, felt, and performed identically as far as I could tell - so the consistency seems good based on my small sample size ;-). The pair of tools costs about $15 IIRC.

At home I use CHP-170 cutters, I’ve been happy with those as well. Can’t beat the price I think.

I don’t think I have a preference between the two, but IIRC:

  • the CHP-170 is less expensive (assuming you get free shipping)
  • the CHP-170 has larger flares at the end of the grips where your fingers rest, eg near the hinge. That’s probably a preference thing. Doesn’t make a big difference to me, but I’d probably get the CHP-170 if I had to chose.

+1 on the CHP-170. Theses are probably among the best bang for the buck. I abused a pair extensively while quickly nipping through a thick welding cable grounding wire (only tool available at the time in a remote location) and they still cut as new. Ive also had the Radio Shack nippers… more typical RS junk.

Dont forget about the Sears “Craftsman” brand. Ruin them and get another pair free.

Sears lately? It seems the shelves are getting bare. Work buys us these so price is right.

Amazon.com ?

so we have to wear Amazon.com.

Sears is not long for this world.
Tools have no rep anymore and I can not find a reason to spend a gift card there that I have had in my wallet for 2+ years.

go online to replace a hex ball blade. At Sears you would have to buy the whole set…

All great suggestions so far. The Hakko and Xcelite look good price wise. One problem is that I live in the boondocks, nearest HD is 100 mi away. So probably will have to add to a Digikey, Mouser or some other supplier order to get shared shipping. Doubt that free shipping would be available for these tools?

Over $35 from Amazon. Add solder :wink:

Yeah tools, sears, etc. Because Kobalt. Chinese man showed me a Lowes Kobalt wrench with sticker on it that said “Made by Snap-on”.

Not too long ago I noticed my 3/8” snap-on in kobalt blue for about 1/3 the price

Ha good idea, but just bought a pound of Kesters solder off ebay a couple of month’s ago.

I have several pairs of Lindstrom flush cutters that I have been using for more than 20 years. These are among the best that I have ever used.

http://www.amazon.com/Lindstrom-Side-Cutter-Flush-Pliers/dp/B000HYOHRQ/ref=pd_bxgy_hi_text_z

Do you not currently shop on Amazon at all? All you need is a total of $35 worth of normal Amazon items and they ship for free, even to the boondocks (USA). Amazon carries lots of stuff you could use that you won’t find in the boondocks. I recently stocked up on rust preventatives such as BullFrog & Boeshield T9. If you don’t have lube for your lights, they carry Super Lube products which you’ll find recommendations for on here.

Yes absolutely have used Amazon for free shipping before, beats paying gas anytime. Sometimes my attention focuses on the singular goal at the moment, and excludes other shopping needs. I will review other needs, and will probably work up a order that qualifies.

I noticed there is pairing that include the Xcelite cutter with a needle nose plier, that’s a good way to start. Amazon.com

I've tried a few different ones, and I really like the CHPs, especially for the price. They are better than some that I've paid twice the price for. Link at Amazon, $4.37 with Prime.

looks like the same set Crescent is rebranding at Home Depot.

The poll seems to be leaning towards the Hakko’s CHP-170’s. I appreciate the fact there are other manufacturers that offer a premium product like the Lindstrom’s are out there. Will have have to backtrack a little on the quality notion, as they are definitely out of my price range. Done some poking around and came upon a bewildering array of cutters over at this site http://www.hmcelectronics.com/cgi-bin/scripts/query.cgi?pg=2&query=flush+cutter

Gotcha, $45 order for free shipping at the Depot, or wait a couple of months till I’m in their neighborhood :slight_smile: .

Found and bought the Hakko CHP-170 cutters over on ebay, Shop by Category | eBay free shipping for only a $1 more over the Amazon price. Feel free to continue the conversation, and thanks for everyone’s input.